Jump to content
SAU Community

Recommended Posts

Getting a 350gt-8 in a few months and my plan is to fit a towbar and pull my old mans boat and my motorbike trailer. Do any of you forum junkies know of any issues that may arrise from putting load on the gearbox? Is it worth updating the trans cooler? And does anyone know the towing capacities....?

Any advice would be great

-Ben

Link to comment
https://www.sau.com.au/forums/topic/184650-towing-with-the-v/
Share on other sites

depends on a few factors.

will you have the car loaded up as well (luggage etc?)

the below is for the coupe so adjustment for the sedan will be needed.

454kg for the toe load

and 45kg for the tongue load

don't forget to adjust the tire pressures as well.

depends on a few factors.

will you have the car loaded up as well (luggage etc?)

the below is for the coupe so adjustment for the sedan will be needed.

454kg for the toe load

and 45kg for the tongue load

don't forget to adjust the tire pressures as well.

The car will almost alway have 3 or 4 people in it when im towing, plus luggage.. Should be fine, it just concerns me that the 8 speed box may Continually slip through gears when im pulling a load. Might have to get some quotes

well its not actually an 8-speed auto, its actually a CVT transmission

i don't know much about them or their ability for towing

for best information, check to see if aussie-delivered CVT cars (such as the nissan murano) have the ability to tow. i can't see it being an issue personally..

  • 9 months later...
  • 2 weeks later...
  • 2 months later...
oh man

i would not even think about it given no-one seems to be able to fix the boxes

He's right, all the forums for fixing that box are blank. Think about it, isn't it a safer option to use another car? If you break the gearbox on that baby you'll have to buy another one form Japan or another car. Not even insurance can help you if it comes to that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just a follow-up on this topic. From what I can tell so far the rusty residue on the engine block might be unrelated to a coolant leak or maybe just older than anticipated. After driving it from the winter garage to my friend's garage I could not see any new traces of coolant leaking there, but I will test this properly once I was able to fully warm up the car and drive it for a bit. I think I can agree that the whole porous engine block stuff is kind of nonsense, but there is just a silly amount of true, false and half-true information on anything Skyline-related on the internet.
    • hrmmm , not mine , easter plans to pull engine not happening     
    • I removed the IACV, cleaned it and reinstalled.  I found a video on youtube that helped with the whole process, the guy then said the idle needed to be set, so the process was to get the vehicle up to operating temperature, unplug the TPS, set the idle screw in the IACV so the RPMs were around 600, then plug the TPS back in.  After I reinstalled the IACV, the car started (because, it was a cold start), once it warmed up, the car died, I adjusted the idle screw to see if that helped anything, it did not, I had to wait about 3-5 minutes, then the car would start back up. Only to shortly cut out, and only crank.  I loosened the TPS to see if adjusting that would do anything, and when I would rotate the sensor clockwise, there was a humming noise, but it would go away when I got the sensor in the horizontal position.  It only made the hum noise with the key on.  What do you guys think? 20250414_172604.mp4
    • Quick update.  The engine grounding strap was replaced, the engine is now happily running.  Tested the voltage drop before replacing the strap, was about 1.2ish volts down between engine to battery, chassis to battery. With the new grounding strap, pretty much no voltage drop at all. 
×
×
  • Create New...