Jump to content
SAU Community

Recommended Posts

Hey guys..

Unfortunately i have to let go of these beautiful 20 inch chrome rims that i had for my project 32 gtr. I have a complete set of four rims that are all 20 x 8.5 in size.

They have been sitting in my room sinse the start of the year when i bought them and have not left their boxes! They are completely brand new!

Open to offers but please be reasonable with them. I am located in South Eastern suburbs of Melbourne, contact me on 0413 285 565 and ask for Steve.

Brand: ADR

Size: 20 x 8.5

Offset: +35

I bought these rims for my skyline and am told they will suit fords as well and most skylines and more vehicles too, free to ask me and i will find out what else they fit! I have not seen myself other ones like this in this size also! Buyers will need to pay for postage and handling.

$1100 DELIVERED TO YOUR DOOR!! TOO CHEAP GUYS FAR TOO CHEAP NEED THEM GONE!!!

Thanks guys look forward to hearing from you. Any questions please do not hesitate and contact me. Cheers

post-42282-1189581608_thumb.jpg

post-42282-1189581619_thumb.jpg

post-42282-1189581628_thumb.jpg

post-42282-1189581638_thumb.jpg

post-42282-1189582281_thumb.jpg

Edited by badgtr34
Link to comment
https://www.sau.com.au/forums/topic/184765-fs-brand-new-20-chrome-rims/
Share on other sites

?Do you know if these rims can be redrilled to accept 6stud?

cheers

hey mate.. i dont think you will be able to do this, however if you do know someone who can do this then this is up to you.

thank you

well there you go, it can be done.

then it comes to this question, how often do you come accross a wheel that you would love to put on your car! if i fell inlove with a rim and wanted it, id go to that extra length to get it to happen!

?Do you know if these rims can be redrilled to accept 6stud?

cheers

hi buddy...my suggestion is to find a bolt on spacer that changes your stud pattern from 6 down to 5....you'll have a lot more luck doing this than drilling holes in rims ....whether or not this is advisable from a safety aspect...i can't say for sure.

hey mate

tyres for these i have looked into, they will cost $1280 for nankang ns2 which is a good overall tyre, however if you want 2nd hand with 80% tread left your looking at $250 a tyre, if not less and they are for dunlops.. if you want info about the place let me know

thanks bud

how hard tp het them onto a gtst???

not hard at all.. depending on your current suspension setup i dont know.. best way around it is put the rims on, then you get the right suspension setup in term of height and you may have to lip the gaurds if you lower the car so that when you do a full lock of the steering wheel you are not rubbing - this is not an expensive procedure and you can do it yourself if you want, only if you know what you are doing though..

thanks mate.. let me know if you are interested

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For something like this, I'd skip just going for the cheapest, I'd find the place with the best experiences people have had, especially for restoration work. Like everything, there is upholsterers, and then there is upholsterers. Some really great upholsterers for automotive restos won't even appear to have an online presence.   My guide would be find some of the old school classic cars that have been fully restored and are immaculate, and ask the people who own them who did the work on their seats
    • Might be tricky matching the seat trim material  If your got the funds you "may" want to get the rear re-trimed as well to match the front
    • How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
×
×
  • Create New...