Jump to content
SAU Community

Recommended Posts

hey,

just a quicky :blink: just wondering how much boost an rb20 turbo can hold safely, im running 12psi through mine but dont want to go anymore cause i have heard lots of stories of ceramic turbos shattering and getting sucked back into the combustion chamber.

should i maybe turn it back down to 10psi till i buy an rb25 turbo or can i leave it at 12 for a while????

Cheers

Matt

Link to comment
https://www.sau.com.au/forums/topic/185039-rb20-turbo-question/
Share on other sites

i have sitting next to me a peice of my friends r32 turbo compressor wheel which shot out through his exhaust.

He was running 15psi + flutter, did a couple of drag runs and bang pop.

I think safe boost level is 13-14psi although quite a few people run at 15psi.

Cheers

you can get away with running 14psi on the rb20's most of the time, but it's best to get it on the dyno if you do to see if it's running lean.

yeah i haven't put my dump pipe on yet so i might wait till i put it on before i turn it up anymore i also want to get a dyno test done but i think ill wait till the next dyno day

  • 2 months later...

I'm running 14-15psi but my engine and turbo are low km's. Does it fine, no probs at all. One of my mates has also run his for over a yr at 14-15psi no probs. Wow, even if a turbo lets go after 2 years thats a huge total cost of like $80 a year for a lot more fun. 11-12 is safe as (If it lets go ure turbo is average anyhow) but i'd run 14psi and no be a b!tch.

Cheers

i'm running 12.5 and havn't had any problems. i hear 12 is safe and 14 is pushing the limit but this is just heresay. i guess it also depends on your driving style, how you maintain your car, and how many km the turbo has done. just make sure you give it enough time to cool down after a hard run and keep it out of high boost in the heat.

I'm just going to add my bit to the above - which are all good opinions. However, I can see you really want a definitive answer. So:

It actually comes down to each car. Now you ask what part? Well, its the whole thing, including the driver!!!!!!! I've developed a simplified formula for you:

post-17876-1195997200_thumb.jpg

The second page got beer spilt on it so I decided just to skip to the last equation:

RB20DET ~ 10-15psi.

Hope it helped :laughing-smiley-014:

dude if your gonna upgrade then I would go a 2530 or 2510...maybe something from trust. The R33 turbo is an improvement over the RB20 as it has a larger wastegate..but its still ceramic...I had a 2510 on my RB20 and it ran beautiful at 16 pounds..If you are gonna go to all the trouble of changing dump pipes then while you are there change all the water and oil lines with brand new ones.They are a nasty thing to change at the best of times, specially that water hose around the back of the engine, we had to drop the starter motor to get to that one...

when i got my 32 it was running stock boost, seemed fairly quick for the first few weeks as its my first turbo and wasnt used to the power change when it hit into boost. Got bored of it so had it dyno'd at hyperdrive to check a few things out and the guy asked me if i wanted to turn it up a bit, i said yes of course :P it is now running 13psi on the high boost setting and has been fine, mind you i only turn it up when i want to give it a bit of a boot. I also only have cat back exhaust and he said it should be fine as long as you dont boot it every day to work on the highway.

got a question of my own, im getting the dump pipe fitted soon and going for a bigger turbo, ive heard the rb25 runs well but want a bit more of an upgrade, any ideas of whats a good turbo upgrade to get?

cheers

I hammered my RB20 turbo at 14psi everyday, and again with the 25 turbo at 12psi. No problems whatsoever ;)

Then I got sick of no bottom end and having to give it 3k and drop the clutch to take a gap in traffic.. RB30 FTW!

The R33 turbo is an improvement over the RB20 as it has a larger wastegate..but its still ceramic...

lol where'd you get that idea from?

The wastegates are physically the same size.

http://www.skylinesaustralia.com/forums/Sl...20&start=20

look at the pictures

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Noted. Have noticed BMW are more 'high maintenance' for sure. They've attracted my attention as I think the used car prices seem reasonable vs other options, and the extra quality overall vs a commodore / camry / corolla or similar of the same vintage is appealing, especially the interior, and they are more on the sporty side whereas the others mentioned can be more cruising or economical A-to-B only.
    • Haha yeah I know, this is SAU after all, why are we talking about BMW's of all things!? I hear you on the 'don't have to worry about it' side of things. Having been fortunate enough to be have been able to buy a brand new motorbike or two...never really enjoyed them as much as I'd have liked as you worry so much about where you park it, will it get scratched, stolen, attempted theft, knocked over, etc...and yes dirty. Older less valuable bikes you can just go where you want and park it wherever and not really worry that much in comparison. And who cares if it gets dirty! Never owned a V8, and have had my eyes on VE / VF commodores for years but with their prices climbing so high, the M3 has come into focus more as prices are much closer than I've ever seen...is it a potential contender now?...of course need to factor in the S65 'maintenance' especially and like you said general M car 'tax'. One can dream anyway. But more on the reality front - did read the whole 330i thread as well and was a great read too, both threads enlightening as I've never even driven one of these cars! I do recall 330i didn't seem to have the same amount of issues for almost the same car (turbos and related differences notwithstanding)...perhaps down to getting it earlier in it's life so looked after better than the 335i? Perhaps so as your 130i has been good and quite similar, so finding a car that's been looked after well is the especially-crucial-BMW-first-step.
    • Nice. Dont worry about the time of not running. My current skyline hasn't run since I bought it. About 8 years ago.
    • It's also worth noting that I am heavily and unconditionally biased. I've had a lot of cars including some GTRs a fair while ago. I love my BMW's now a lot. They make no sense a lot of the time and the guys on here remind me regularly that I could get something else that does what I want better and cheaper. If you're going to take on an older BMW it's definitely a commitment. If you bail on it early you'll lose money and also the ability for it to put a smile on your face. Stick with it and it just gets better.  f**k I should get into advertising.  
    • Careful with posts like that around here without the flame suit on @cobo_11! 😂😂 My 330i journal is on here too. That car was so good and super reliable. We still have a 130i in the family which is almost identical to the 330i and easier to find in manual. It has also been almost faultless over the 6 or so years in the family.  I used to want an M car a lot more than I do now but if I'm honest and without trying to sound like a wanker, I can get such good performance and handling out of my 335 without needing to worry about all the crap that goes along with M car ownership. I don't need to worry about my bearings or subframe issues or the cost of replacing brakes or suspension or whether it has been impeccably maintained. And I can leave it places and not get upset when it's always filthy.
×
×
  • Create New...