Jump to content
SAU Community

Blowing White/grey Smoke -> 1 Plug Tip Is White?


Mr_GaZZa
 Share

Recommended Posts

Hey every1,

omg i cant believe it, i am blowing smoke... smells oilly!!!

more on tick over or crawling... and on standstill when u give it a REV...

its never done it b4

got my car boosted 'with manual controller' and dyno'd @ streetforce... i said i only wanted 10PSI

but the bugger tired for more when i got cash out!!! n said that didnt make much more power @ 14psi

i mean then he turned it down to 10ish!!

DAM!! what is gone? how can i look for wat it is? would i be valves guides? turbo? piston rings? :)

i am so angry now at him for that!!

HELP ME PLZ

GARY

Edited by Mr_GaZZa
Link to comment
Share on other sites

undo some of your cooler pipework and look for oil in the pipes

if you see a bit, wipe it away then run the car again

if it comes back quickly then youve probably shagged the turbo oil seal

or it could be leaking on the exhaust side, which is whats making it smoke, as you have raw oil leaking into the exhaust housing

Link to comment
Share on other sites

undo some of your cooler pipework and look for oil in the pipes

if you see a bit, wipe it away then run the car again

if it comes back quickly then youve probably shagged the turbo oil seal

or it could be leaking on the exhaust side, which is whats making it smoke, as you have raw oil leaking into the exhaust housing

:unsure: yeah i took one pipe of b4 it goes into the intercooler... looked coated in oilly stuff :P so gave it a clean.. going to install n start up again!

if its the rear , just remove the frontpipe n look?

Link to comment
Share on other sites

:unsure: yeah i took one pipe of b4 it goes into the intercooler... looked coated in oilly stuff :P so gave it a clean.. going to install n start up again!

if its the rear , just remove the frontpipe n look?

if your referring to the exhaust side youll need to drop the exhaust off at the dump pipe / front pipe area and look from there

its natural for some trace amounts of oil to be there (visual) but it shouldnt be dripping / fresh

Link to comment
Share on other sites

if your referring to the exhaust side youll need to drop the exhaust off at the dump pipe / front pipe area and look from there

its natural for some trace amounts of oil to be there (visual) but it shouldnt be dripping / fresh

:P

okay working on that bit now!!

um... what / where can i find my PCV ... heard other ppl mention that with this issue... maybe mine needed a replacement.. awhile bk i had idle problems n kinda fixed it self

with lil adjustments to the idle screw!!!

also only other problem i had was WRX sound randomly... but only in winter /dampness ... once a week at most... maybe they where signs =(

hasnt done that for 2months but

omg :unsure:

Link to comment
Share on other sites

sounds like broken pistons.

NO NO!!! aint lost no performance, no heat gains, no real oil usage or any WIERD noises

i thinks its the rear turbo seals

=(

any1 else got any ideas??

BTW cars nearrly done 160 ### km

GaZ

Link to comment
Share on other sites

hey all :laugh:

been working / finding out stuff all day about my car!!

only smokes when hot, and only after its sitting ther n u give it a rev u get a lil puff...

it doesnt smoke when or acceleration or de/ acceleration and doesnt smoke when cold!

performance is same, oil pressure remains to its normal pressures i see and engines temps are well under half way !!!

me thinks it REAR turbine oil seal =(

LF new turbo / or place in Perth to rebuild it....

Gaz

P.S thanks every1 for ur input

Edited by Mr_GaZZa
Link to comment
Share on other sites

sounds like pistons to me, i had this problem too, same colour smoke ect. still had good performance, but blowing heaps of smoke and using up my oil. took it to my tuner he tells me its pistons.. pulled the engine to bits and all 6 ringlands were f**ked :laugh:

sorry, probably not what u want to hear, but before you get the turbo rebuilt get a leak down/compression test done

Link to comment
Share on other sites

Yeah, there is a way too find out which one it is

while doing a compression test.

I'm not too sure how to do it!

But i think it's were you put oil on top of the cylinder

and then when you do the compression test,

if it goes higher its your stem seals or if it stays the same

it's your rings.

Not too sure though so if someone could correct that will be good.

Link to comment
Share on other sites

noooooooooooooooooooooooooo!!!!!!!!

:laugh: RAWR

i hope its just something cheap/ easy to fix

omg BS >< if it was pistons wuldnt u be burning oil.. n wuldnt it be worse @ cold start :S

and i dont get no smoke while cruising... n stuff all or if any when pulling away **looks in mirrors**

also took off oil cap, no signs of back pressuse or spitting, just a slit change in idle...

=(

thanks guys.... i'll keep my options open, until i go to a few yards n mates @ tuning shops / nissan n see wat they

say 2

thanks ;)

BTW compression test will be done this w/e coming

Edited by Mr_GaZZa
Link to comment
Share on other sites

thats right.. if u put in oil and do the compression test it should help verify wether its valve guides, stem seals etc

just becareful wat shops u go man same thing used to happen in my other car, not a nissan but under load/boost it used to puff a blue smoke.. and sometimes on vaccum once cruising car slowing itself down from 80,60 it used to blow alot of blue

went to tonnes of workshops they said needs a rebuild, some said rings r going, some said valve stem seals or valve guides..compression tests came up fine. opened it up myself it was only a manifold gasket cracked,

even when i used to rev it at neutral up to 3 grand for 10 seconds then backoff it started to blow the blue.

sometimes its not as bad as it sounds.. get compression test first, start ur way from the bottom and go up

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • So next year I am looking at upgrading from my VE SS bomadore ute to something more refined.  I wanted to stick with a V8 but not anything German or Australian, either a coupe or a sedan. So if I wanted anything newish that limited my options to either the Lexus RCF which I quite like. But with the price they demand and a kid on the way a 2 door coupe is probably not going to be the best idea. The next best thing would be the ISF but the newest models are 2014 and commanding over 60k and even the older 2008 models in ok condition starting around 35k is kind of bullshit. So I figured if I could not have the noise I could perhaps make do with easy power. Enter the infinity Q50 or Skyline equivalent. The price difference between the 300 and 400hp models seems a bit crazy. Right now there is 300hp Q50 one on carsales from a dealer with 61km for 27k drive away. If I wanted to get a 400hp Red or 400R car the prices seem to start at 43k From my limited research it seems that the only differences are that the 400r/Red Red runs more boost and a more aggressive tune. There are are turbine speed sensors on the turbos. Has 2 pumps for the water to air intercooler. Runs an engine oil cooler. I'm guessing that the exterior trims might look a little more sporty as well. I had a lazy look for upgrades to bridge the gap on z1motorsports They have kits that upgrade the water to air heat exchanger as well as the coolant pump which should give a non Red/400r better intercooling temps than the stock Red/400r. I added an engine oil cooler with a thermostat as well to try and make things as close as possible. Obviously the ECU is going to need a tickle. Having not done much in the way of research they also sell a ECU flashing tool with pre loaded tunes that are supposed to boost the non Red/400R by 100hp which adds 1k USD to the cost. The total cost of the parts @ the current time including shipping and taxes worked out to be $4350 AUD. Personally I would rather get the car tuned on a dyno which would probably add more cost Assuming the worst that you got a workshop to install the new parts I would guess no more than 5 hours would be required in the worst case @ 5 x $150 per hour = $750 So the total cost could be around $5100 So for easy number 5k + 27K = 32k I guess that would leave some change left over to swap out the open diff and fit a LSD Any thoughts?      
    • Right, not sure why I thought it to be a lean spike. It might be fixable with modern card-style hot film MAFs which have some design features to avoid counting reversion flow but I've never tried it myself.
    • I did not realise this, I'll contribute more and earn my stripes and retry later. 
    • I'm only going to hassle you for posting links to images. It's against my policy to click links that could be some nasty payload. Sadly, you need to make 9 more posts before you can just stick the images directly in a post, unless @PranK sees this and bends the rule for you.
    • Hello,new to the group, I bought a R32 from auction recently, wondering if anyone knows the cars history, seems to have the usual go fast bits on it, plan is to do an engine swap- add 2 extra cylinders and 1 extra turbo. https://www.dropbox.com/scl/fi/i4rjmlzubjbwjtguh6f4s/IMG20241011140744.jpg?rlkey=q0lumm251377vknbqktfwrycq&st=7scvwx4e&dl=0 https://www.dropbox.com/scl/fi/ro24qmwzlczzlfsr4y05x/Screenshot_2024-10-10-10-49-23-90_9a2f5bb2149dae94cd1e190effc09b33.jpg?rlkey=oyguh26ttshlf04ccp48odf4v&st=xloae97b&dl=0   New to forums and posting pics, if links don't work, take it easy on me, 42yrs old and I tune carburettors!!  
×
×
  • Create New...