Jump to content
SAU Community

Recommended Posts

i got fined the other nite for having my number plate on the LHS of the car (33gtst) $240 dollars later i called the transport department and they said that the plate can be anywhere on the front of the car as long as it is viewable from a 45' angle??? is there anyway of getting out of this redulious fine without going to court??

Link to comment
https://www.sau.com.au/forums/topic/185493-help/
Share on other sites

no it is better going to court buddy, just provide documented evidence from the transport company that states that you are allowed to have your plate there. Provide evidence from mitsubishi about the late model evo which has it there....chances are if you provide this evidence..you may not need it, but the judge my look at it and WTF are you wasting my time with this and throw it out.

Best going to court buddy.

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3356201
Share on other sites

You need to take a very scientific approach to beating this fine...

Park your car at a shopping centre right on the white line under the middle of the car, then measure a 45 degre angle from the front of the car in both directions.

Be very accurate, mark the 45 degre line with chalk on the concrete, make sure you take photos of you doing the measuring and the marking.

Then stand back 20 metres or so and take a photo of the front of your car with your camera from both lines.

If you can see the number plate easily in both photos you will win the case easily, if you cannot see it in one of the photos then dont bother going to court, just pay the fine.

Does this make any sence?

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3356274
Share on other sites

Dude was it a state traffic task force officer that fined you? or a normal copper? i had a defect that i thought was stupid/irrelevant/bullshit and i wrote in to the officer in charge @ STTF with all my evidence and everything and he wrote back saying no action was required on my behalf and he would look into it further and get back to me, its now 3 months or so later and i havent heard back from him but i'm sure when/if i hear back he will favour my way, you should do the same

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3357743
Share on other sites

The ONLY way things like this will stop happening is for everyone who cops a bullshit fine/harassment etc to go thru the inconvenience of taking it thru court, turn up well armed & have the facts give the beak no option but to throw it out.

Only then will some sort of precedent be set & hopefully the cowboys within the service will be finally told to back the f**k off & leave us alone when it comes to this sort of petty crap.

There is no doubt that police have their place in the world, but sometimes some of them need to be reminded exactly where that place is........

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3358375
Share on other sites

I really don't see how you can get done for having your plate offset to one side, if it is veiwable under their rules, then its legal.

I work on Alfa Romeo's, with the design of their front ends the factory mounting position for the number plate is offset on the left hand side of the vehicle, there was something back in 98 when the 156 was first released here that they had to change some rule allowing this, not 100% sure on what state of what the rule was, but still we have never had any customer complain of being fined for an offset number plate.

Find out the rules and if you are sweet under then take it futher.

Good luck

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3358501
Share on other sites

i went and saw a transport department officer about it yesterady...he said good luck and told me to try and put it in the middle...f*@kin F#&K F*&Ks...looks like i just gotta pay because of being a minority.

Link to comment
https://www.sau.com.au/forums/topic/185493-help/#findComment-3359443
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What could be causing my clutch problem besides a bad master or slave then? Both those parts are new 
    • Just came across this, but in QLD I start leave again in 2 weeks, if it is still available I might drive up and check it out Unless, @MBS206 do you live near here????, if so I could hit you up with a finders fee https://www.gumtree.com.au/s-ad/hope-island/auto-body-parts/nc-mx5-factory-hard-top/1328976391
    • My hold point for future mods is that I want a OEM detachable hard top first, but, finding one is a pain, MX5 Mania are looking for one for me, but, as hens teeth are more common, finding one in Australia is proving problematic  I can get a OEM one from overseas, hell, you can still get new ones in 'Merica, but, shipping is a absolute killer and I cannot justify the cost, or the risk of it being damaged during transport As for the aftermarket hardtops, whilst they do the job of being a hard top, and are fine for a track car, they don't seal well (read: leak like a sieve in the rain), and you need a plastic/poly rear window, plus they are a bolt in option only and not made to be easily removed I liked how the hard top on my NB could be fitted, and removed, by myself, in less than 5 minutes I know it sounds bad, but I'm waiting for someone to write off a car with one so I can swoop in on their pain, it will go to a good home though, so my guilt of this is tempered
    • I’ve got one on mine and it’s fine, 
    • No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
×
×
  • Create New...