Jump to content
SAU Community

Recommended Posts

That should be fine.

CASTOL EDGE 10w60

SHELL HELIX ULTRA 5w40

The above are also good quality oil's to use.

Have a read of the link below, plenty of recommendations and experiences with different oil's :worship:

http://www.skylinesaustralia.com/forums/in...showtopic=22458

Edited by abu
Link to comment
https://www.sau.com.au/forums/topic/185520-99-r34-gtt-neo/#findComment-3356745
Share on other sites

if the engine is in good condition and doesn't "breath", then you want the thinnest oil you can get away with.

the first part of the oil numbers (0w40) is it's grade when cold.

so 0 is as thin as you can get which is good.

get him to check after a few weeks of driving and then again a month after to see if it is using up any oil.

if it is, then it's too thin and will need to top up until the next oil change where he should try something else..

perhaps with a 5w or 10w

the usual Castrol 10w60 recommendation is good on the usual 12+ year old engine which will have some wear.

so the thicker oil won't get burnt up in the combustion process.

there are also good threads regarding synthetic, semi synthetic oils which you can find on these forums.

Link to comment
https://www.sau.com.au/forums/topic/185520-99-r34-gtt-neo/#findComment-3356927
Share on other sites

if the engine is in good condition and doesn't "breath", then you want the thinnest oil you can get away with.

the first part of the oil numbers (0w40) is it's grade when cold.

so 0 is as thin as you can get which is good.

get him to check after a few weeks of driving and then again a month after to see if it is using up any oil.

if it is, then it's too thin and will need to top up until the next oil change where he should try something else..

perhaps with a 5w or 10w

the usual Castrol 10w60 recommendation is good on the usual 12+ year old engine which will have some wear.

so the thicker oil won't get burnt up in the combustion process.

there are also good threads regarding synthetic, semi synthetic oils which you can find on these forums.

thanks dude, yeah i know about the specs of oil, he was just unsure whether maybe that was too thin for it or not. i mite tell him to try the shell ultra which i think is a 5w-40

Link to comment
https://www.sau.com.au/forums/topic/185520-99-r34-gtt-neo/#findComment-3356954
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...