Jump to content
SAU Community

Recommended Posts

Hi All

Thought I might give an update on my Turbo removal. Took about 3.5 hours. This included spending about 30 minutes to remove one 10mm bolt holding the heat shield. Had to remove exhaust, tail shaft and transmission mount bolt so I was able to push engine/trans unit across to the right to allow removal of turbo. I was lucky to have the use of a two post hoist and 3/8 drive sockets whit swivel heads.

Priced a new unit from Nissan $1950 plus tax, two weeks delivery.

Precision Turbochargers Sydney approx $1400 yet to be confirmed.

What had the turbo done?

Exhaust turbine was still there but had lost some of its vanes. Bearings were seized also. I think this happened after the turbine damage, as once power was lost turbo could still be heard trying to boost for a couple of days.

Looking forward to refit later this week and more torque.

Muz

  • 2 weeks later...

Hey did a search of this thread..

On just japs website.. which oil filter is the genuine nissan item?? i keep having problems with ryco ones from supercheap and they aint that cheap..

http://www.justjap.com/store/home.php?cat=...on=0&page=2

its the S15 filter right? and v35 skyline?

Hey did a search of this thread..

On just japs website.. which oil filter is the genuine nissan item?? i keep having problems with ryco ones from supercheap and they aint that cheap..

http://www.justjap.com/store/home.php?cat=...on=0&page=2

its the S15 filter right? and v35 skyline?

Yep, same as VQ35 and SR engines.

You could go OEM for $20 OR you could go a Nismo filter for a little more :P

Edited by iamhe77
Hey did a search of this thread..

On just japs website.. which oil filter is the genuine nissan item?? i keep having problems with ryco ones from supercheap and they aint that cheap..

Can I ask what was wrong with the Ryco ones? I've used Ryco for as long as I can remember and throught they were half decent.

So the 'extra' right white dome is the fog light?

Confused... which is the one with the cold pack, and what exactly does the cold pack include?

Thanks guys, im getting s Stag soon and the one im looking at has the winking lights.

Red one on the right is the fog light.

Cold pack has heated front windscreen, a heater element in the air vent to heat up the air faster, heated side mirrors.

  • 2 weeks later...

The power and torque delivery of the VQ25DET is incredibly smooth there.

Some things I noted:

  • Boost starts becoming noticeable somewhere just before 2000rpm (as suspected)
  • The VQ35DE has more torque until 2000rpm where the VQ25DET smashes it (well, until the very top end).
  • Actually, all the others have more torque than the VQ25DET initially.
  • The VQ25DET has overall the most power and torque where it really counts (say 1500-3500rpm)

VQ25DET = awesomest! :banana:

  • 2 weeks later...

I have to add my point. Personally I don't believe that's a very good comparison if they have actually used a 350Z (Z33) car to go against a VQ25DET Stagea. I've driven both an auto 350Z and a PM35 and both cars delivers their power and torque differently. A PM35 is bloody quick off the mark, and surprisingly, I felt it was quicker than an auto 350Z. Why? The gearing on both cars are vastly different. The PM35 felt like it had a shorter gearing than the 350Z, making it spring off the mark better.

I've been surprised at how well a PM35 goes compared to an NM35. In city driving, I would actually prefer the naturally aspirated engine than a turbo. The moment you stomp on the gas of a PM35, it just shoots away. Sure the turbo NM35 will develop more power and torque at higher rpm than the VQ35DE, but it's that instant response of an n/a that I'm very impressed with.

And so much so the last 3 Stageas that we have sold recently have been PM35's. 2 of the buyers drove both the turbo and n/a cars and both decided the later model Stags drove better. The other buyer was from interstate.

But if you're after a Stag with mod potential, then the turbo wins hands down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
    • This seems like a pointless exercise. There is no E30 availability. Ongoing availability of E85 should not be assumed. Flex-fuel is the only sensible approach, so you can use E85 when and where you can get it, 98 when that's al you can get, and anything in between as you fill it up and drain it down. And if that means replacing the pumps, fitting a flex capable sensor/ECU/whatever has to be done to these Renault shitboxen, then.....so be it?
    • Sorry, I wasn't very clear.....just that the standard injectors are apparently good over 600rwhp/450rwkw which you won't get to on standard turbos anyway.....they are much better sized from factory than we are used to in RBs.
    • I'm not sure where you are, but United Terrey Hills has E85. 
×
×
  • Create New...