Jump to content
SAU Community

Recommended Posts

So are any manual RWD variants able to be brought in with the current compliance that is available?

I was considering one of these, but wouldn't waste my time with auto or 4wd.

ring ben at northshore prestige

http://www.northshoreprestige.com.au/

I just noticed a threat about a WC34 with a Mines ECU.

Just checked there site, they have a M35 system available http://www.mines-wave.com/E_09/CATALOG/E_ECU_NISSAN_E.html

Anyone running one of these units? I assume they would not be practical if you perform major mods as the unit would need to be remapped anyway.

Any feedback?

So are any manual RWD variants able to be brought in with the current compliance that is available?

I was considering one of these, but wouldn't waste my time with auto or 4wd.

I was looking at the Jap Auction sheets earlier this year and the few manuals that pop up are going for quite a lot or being passed in unsold as the owners are expecting a fair bit for them. Obviously things change but from memory not much was being sold for under 1,300,000 yen.

Geoff from Prestige Motorsport offers free trial membership where all of the Stageas going to auction are emailed to you each day and you can log in the next day and check their sale prices.

At current prices I'm not sure Ben from Northshore will buy too many manuals on speculation but if you were serious you might be able to have him source you one. Or just wait and they'll drop down in price over time and then I'm sure they'll start appearing here.

I just noticed a threat about a WC34 with a Mines ECU.

Just checked there site, they have a M35 system available http://www.mines-wave.com/E_09/CATALOG/E_ECU_NISSAN_E.html

Anyone running one of these units? I assume they would not be practical if you perform major mods as the unit would need to be remapped anyway.

Any feedback?

I don't believe that Mine's do a mail order service.

You need to have your car there for them to tune the VX Rom unfortunately.... Hell, you need to take your car to them if you wish to buy their beautiful Z33 Throttle Body

I don't believe that Mine's do a mail order service.

You need to have your car there for them to tune the VX Rom unfortunately.... Hell, you need to take your car to them if you wish to buy their beautiful Z33 Throttle Body

bastardos!! :thumbsup:

  • 4 weeks later...

I'll apologise now if this has already been posted at some point, tried a search but got an error.

I was scouring nissan stagea sites with google and had a huge play on the Nissan Japan site and came across a link to a site called Nissan Get-U, anyway after some fiddling around I found a stash of information (yes, in japanese :( ) and pics for the line of stagea's, i have only included the link direct to the M35 (2.5 / 3L) but the site also had a link for WC34 and the later M35 (PM35).

Anyway, wanted to share the information, it is quiet thorough and may be an interesting site to bookmark. (and no, I still have not tracked down the exhaust I have)

http://www.get-u.com/CATALOG/STAGEA/M35/0110/index.html

Whilst I was checking the components for my sound control exhaust and getting it operating I decided to take some photo's of other components and electrical stuff throughout the car.

Anything not connected or missing and you notice it please let me know :D

post-59561-1272959910_thumb.jpg

post-59561-1272959984_thumb.jpg

post-59561-1272960011_thumb.jpg

post-59561-1272960034_thumb.jpg

post-59561-1272960068_thumb.jpg

post-59561-1272960102_thumb.jpg

post-59561-1272960137_thumb.jpg

post-59561-1272960172_thumb.jpg

post-59561-1272960223_thumb.jpg

post-59561-1272960249_thumb.jpg

post-59561-1272960274_thumb.jpg

  • 3 weeks later...

those are the compliable models, essentially the N means AWD, the P means revised model, what we call a series two.

and yes you can get a PNM35 :)

most models come with optional leather, except ARX which only comes with leather. optional tv/satnav (english language conversion is now available!), sunroof, aero selection (on RS and RX only) and a crap load of other options

To Chook & Chris Rogers,

Hi guy's I'm new here so cannot PM you yet, but I would like to find out more about the costs involved in adding a TV tuner with aux input into my M35 300RX. It's fresh off the boat and has the factory sat/nav/tv & bose system with sub. It all works well (albeit in japanese- I'll be looking to convert the language with your man Shaun over here shortly) and I intend adding a rear screen, xbox & DVD for the kids, and a reversing camera.

The setup you guy's have come up with looks awesome and just the ticket to get the ball rolling so keen to find out more and...thanks in advance!

To Chook & Chris Rogers,

Hi guy's I'm new here so cannot PM you yet, but I would like to find out more about the costs involved in adding a TV tuner with aux input into my M35 300RX. It's fresh off the boat and has the factory sat/nav/tv & bose system with sub. It all works well (albeit in japanese- I'll be looking to convert the language with your man Shaun over here shortly) and I intend adding a rear screen, xbox & DVD for the kids, and a reversing camera.

The setup you guy's have come up with looks awesome and just the ticket to get the ball rolling so keen to find out more and...thanks in advance!

Hi Blade,

I'm new here too, and live in Auckland. I've owned a '97 Stagea since 2000 (one of the first in NZ) and have just imported an M35, a 2006 RX250 FOUR (non-turbo) to replace it with. The digital TV mod the Aussies do, isn't suitable for NZ as our terrestrial digital TV system is completely different to theirs, using MP4/h.264 video and AAC/AC3 audio. I don't know of any 12V tuners available yet, and if there were any, I believe they would need to be configured to output NTSC video in order to work with the onboard screen. It's possible one of those HDD media players could be an option, so I maybe looking into that. Awesome car though, and also looking forward to the nav conversion too, although the mod for the 2005-2007 models isn't ready yet.

Whilst I was checking the components for my sound control exhaust and getting it operating I decided to take some photo's of other components and electrical stuff throughout the car.

Anything not connected or missing and you notice it please let me know :yes:

Bis-e Bee, Sorry if it's been mentioned elsewhere, but do you or anyone know what that fluid bottle with the angled filler shaft (as in your photo) is for and where it's located? I thought it was behind one of the storage compartments in the side of the boot, but my 2006 - 250RX FOUR (non-turbo) model doesn't have one of those. The passenger side does have the TV tuner module, but with different TV and output connectors to the 2001 - 2004 models.

To Chook & Chris Rogers,

Hi guy's I'm new here so cannot PM you yet, but I would like to find out more about the costs involved in adding a TV tuner with aux input into my M35 300RX. It's fresh off the boat and has the factory sat/nav/tv & bose system with sub. It all works well (albeit in japanese- I'll be looking to convert the language with your man Shaun over here shortly) and I intend adding a rear screen, xbox & DVD for the kids, and a reversing camera.

The setup you guy's have come up with looks awesome and just the ticket to get the ball rolling so keen to find out more and...thanks in advance!

unsure on the TV format used there. DVB-T is teh local one here. as for getting things INTO the unit. I sell the leads to do so and I can modify the stock TV tuner to take a camera easily enough. nissan changed tuners in those in the second gerenration. they wnet from using the sedan tuner (s1) to using the coupe tuner (s2) electrically both do the same thing. internally they are quite different. I'm working on a interface so that you can rip that out and plug a normal one in its place. still at prototyping stage though.

Hi Blade,

I'm new here too, and live in Auckland. I've owned a '97 Stagea since 2000 (one of the first in NZ) and have just imported an M35, a 2006 RX250 FOUR (non-turbo) to replace it with. The digital TV mod the Aussies do, isn't suitable for NZ as our terrestrial digital TV system is completely different to theirs, using MP4/h.264 video and AAC/AC3 audio. I don't know of any 12V tuners available yet, and if there were any, I believe they would need to be configured to output NTSC video in order to work with the onboard screen. It's possible one of those HDD media players could be an option, so I maybe looking into that. Awesome car though, and also looking forward to the nav conversion too, although the mod for the 2005-2007 models isn't ready yet.

Hi Spong, nice to hear from you, fellow Kiwi and thanks for your response. I had suspected that the ausy system wouldn't work yet but thought it might in the future, I did not know that it is completely different. Typical that we would choose to go down a completely different route. I had thought that a Pal to NTSC converter might be required or that I would just use the tuner as a pass thru to connect other devices. Oh well, I have limited knowledge at this point but time spent here should provide some options. I had also assumed that i could use a modded original xbox outputting NTSC for DVD & games and that this would connect to a tuner as an input.

Anyway, loving the car it is indeed awesome. Were are you at, I'm on the north shore.

unsure on the TV format used there. DVB-T is teh local one here. as for getting things INTO the unit. I sell the leads to do so and I can modify the stock TV tuner to take a camera easily enough. nissan changed tuners in those in the second gerenration. they wnet from using the sedan tuner (s1) to using the coupe tuner (s2) electrically both do the same thing. internally they are quite different. I'm working on a interface so that you can rip that out and plug a normal one in its place. still at prototyping stage though.

Hi Chris, thanks for your response. I must confess I am a little confussed at this point and it would appear that I underestimated what would be involved despite reading thru most of this site.

My 300RX is a 2001 i.e. series 1 M35. I have not pulled it apart yet to locate the factory tuner but as per my post above had intended to use this, or another, as an input device. Is this still possible? Does the cable you provide have a propriortry plug to tuner with an RCA female audio video input plug to connect other NTSC devices? I can, and will have to at this point, do without TV but would like to use that av input for DVD etc. The reverse camera would also be importent as I have young kids. Thanks again.

Bis-e Bee, Sorry if it's been mentioned elsewhere, but do you or anyone know what that fluid bottle with the angled filler shaft (as in your photo) is for and where it's located? I thought it was behind one of the storage compartments in the side of the boot, but my 2006 - 250RX FOUR (non-turbo) model doesn't have one of those. The passenger side does have the TV tuner module, but with different TV and output connectors to the 2001 - 2004 models.

I could be wrong but i think what you are referring to is the Attessa reservoir for the AWD system. In my car it is located behind the right-hand side storage compartment. I don't know but is your vehicle rear wheel drive only?

Hopefully that helps.

Cheers

Hi Chris, thanks for your response. I must confess I am a little confussed at this point and it would appear that I underestimated what would be involved despite reading thru most of this site.

My 300RX is a 2001 i.e. series 1 M35. I have not pulled it apart yet to locate the factory tuner but as per my post above had intended to use this, or another, as an input device. Is this still possible? Does the cable you provide have a propriortry plug to tuner with an RCA female audio video input plug to connect other NTSC devices? I can, and will have to at this point, do without TV but would like to use that av input for DVD etc. The reverse camera would also be importent as I have young kids. Thanks again.

the lead I sell gives RCA input to the stock system. you still need to feed it a NTSC signal but thats it. if you do the camera I need the OEM tv tuner as I need to modify it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Any number of different ways. Have the coils draw sufficient current to provide contact wetting. Use different contacts in the switch, either by material or design, better suited to the low current drawn by a relay coil. Etc.
    • Hmm, how does the R34 manage to have headlight relays then without getting excessive carbon buildup on the headlight switch contacts?
    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
×
×
  • Create New...