Jump to content
SAU Community

Recommended Posts

My 32 started playing up last night, only things that changed was me disconnecting the battery for about 30 mins while installing headunit, and filling up a full tank of BP Ultimate (and then making good use of 3 lanes on 2nd gear gear limiter - on a private road of course.)

Symptons:

-Poor idle, has a audible miss, idle drops occasionally

-When suddenly letting off the accel and putting clutch in, car wants to stall, and often will if i dont keep revs up

-Is noticably down on power.. seems laggier.. don't feel anything until about 4.5k rather than the normal 3k.

-Stock boost gauge has no reading (Not sure if it was working before hand, never bothered to look)

-No speedo reading.. Unrelated but it happened at the same time, what usually needs to be replaced?

Car has Turboback 3" exhaust, FMIC, pod, stock bov, stock ecu, running 0.8bar with no boost controller or anything.

I've checked cooler pipes, 99% sure theyre fine, not really keen to just go around checking random stuff in case theres a common fix for this.

Thanks, bry

Just changed the fuel filter, feels alot better now, will take it for a better drive later on. Cat isn't blocked.

How can I check the knock sensor? Or is it more of a matter of just replacing it?

Thanks for the suggestions!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Means something is not set up right, tune/calibration related.  
    • Finally replaced the previous temporary mesh indicator surrounds (temporary was the last 10+ years 😂) with a 3D printed GTR style version for the front indicators. I think it looks a lot nicer than the old setup and at least the indicators now point in the correct direction rather than angled off. Needed a little bit of tweaking to deal with the intercooler piping but got there in the end. Old and new photos below. 
    • It's weird to me that you say this because I'm pretty sure locals with relatively standard standalone tunes (boost/barometric compensated alpha-N) still have driveability issues when they pop intercooler hoses. Maybe with enough data I can just train some kind of model that spits out an expected grams/cyl given every sensor input except MAF like what FCA did with their Pentastar 3.6 ECU logic. Basically stock everything. The main motivation honestly is to have a sensor that can be a decent baseline source of truth. In scenarios you're describing obviously it won't work every time but it seems to me the number of corner cases that exist in MAF load is maybe not as severe and difficult to manage vs ITB alpha-N with some MAP/barometric compensation.
    • What are your plans for your blow off valves? Purely plumb back? How soft will the spring in them be? AFM can be tricky to get super smooth and nice, especially depending on the rest of the system, and then can be very easily upset if something slightly changes. IE, even if you run recirc blow off valves, you could still see issues getting it to behave at certain load points as turbos might start to spool, but you release the throttle but it's not enough pressure to crack the bov open to recirc, and you can end up with reversion which can cause double metering, and hence dumping of fuel into the system, and stalling the engine.   If you're going to run a map sensor for closed loop boost control from the ECU, what makes you want to keep the AFM?    
    • It's not bad, it's just not flexible. And say if you have any leaks between the MAF and plenum, well then your load axis goes out the window. Here's a real world scenario, I blew off an intercooler hose last track day, as the clamp decided to Bluetooth itself somewhere. Still continued to do 2 laps and drive it to the pub for a couple of beers then home. Good luck doing that with a MAF setup 
×
×
  • Create New...