Jump to content
SAU Community

Recommended Posts

Hey guys

tonight while re connecting my battery in a moment of sheer idiocy I connected the battery terminals around the wrong way and BOOM huge sparks from the battery, I immediatly realised what I did and checked all fuses in the fuse box under bonnet and all under the dash on the drivers side, they were all fine, now when I try start the car it just cranks and nothing else, the hand controller on the Power FC doesnt light up or anything

Did I fry the PFC or is their something else I should look into ?

Cheers guys really need help on this

Link to comment
https://www.sau.com.au/forums/topic/185746-connected-battery-wrong-way-around/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Ive checked the fuses 3 times now, chucked the stock ECU in then and still same thing car cranks but wont start, but I have Z32 AFM, GTR Injectors and Resistor pack etc so the car wouldnt start with the stock ECU anyway would it?

Do you have injector pulse? No injector pulse is a sign of a blown ecu... car will crank as per normal but wont fire.

Edit - check with both ecus re injector pulse..... could be some wiring has melted also.... I had wires melt behind the wastegate (Map sensor wires) end result was a blown ecu... wiring replaced and a new ecu it was all good.

Check all fuses in engine bay, drivers side panel and in boot.

I know the feeling when silly mistakes brake the car and always think the worst has happened.

Eliminate the small things before thinking it's the pfc/injectors/ other things.

Good luck!

Nah car didnt start at all or go to start at all just cranked,

I have no idea if I have injector pulse how do I check that? thanks

The way I know is these little globe things.... forget the technical name! lol

Basically you remove the harness from the injector and plug it in to the globe and crank he engine over. If they are working it will light up.... my dad has a set of them, il find out the right name tomoz!

Could be another way.... possibly someone else knows????

Ok, lets start eliminating a few things. Firstly, lets check to see if you have power to the computer, ECCS relay, fuel injectors and ignition coil relay. These power supplies can be checked easily by simply using a multimeter and probing the wires at the connector near the power steering reservoir. The big white wire with black stripe feeds battery voltage directly to the injectors and pin 58 on the ECU and also feeds power to the ECCS relay. Note that with the battery connected you should constantly have 12V at this wire.

Assuming this is ok you'll need to check the big white wire with purple stripe for battery voltage as well. This is a feed to the ignition coil relay. Check this first and then advise findings. These items will at least tell us whether some of the main power feeds are present.

Let us know how you go and we can then determine the next step.

With all this, I am assuming you have no fuel pump operation. If the fuel pump is working it would imply the ECU is probably getting at least power to pin 58.

Cheer,

Ben

Nah mate could never hear it turn on before it stuffed up. I really hope the PFC isnt fried because its next to impossible to source one for a RB20 now and I dont have that kind of money :thumbsup:
The way I know is these little globe things.... forget the technical name! lol

Basically you remove the harness from the injector and plug it in to the globe and crank he engine over. If they are working it will light up.... my dad has a set of them, il find out the right name tomoz!

Could be another way.... possibly someone else knows????

Noid lights i think they're called. :thumbsup:

dont feel bad,i did the same thing.LoL

now im no electrician,i should be able to confirm when i get home by looking at my old burnt out fuse.

Now in the fuse box in the engine bay drivers side,theres a green fuse that needs to be changed,i can maybe even give you the narva part number. BUT my electrician who sourced it said i was lucky that my mate wired my turbo timer in dodgey which luckily saved my ecu.

Soon as i get home,ill get you the electricians phone number if you like,he comes to you from Penrith.

Edited by RSTME

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...