Jump to content
SAU Community

Recommended Posts

I am soon to be installing a new front pipe and catback to my GTR. I have done catbacks before and they are easy to do.

I was wondering if it is difficult to install a front pipe on a GTR? Is there alot of things in the way or is it fairly simple and straight forward with minimal hassles?

I have heard that dump pipes are pretty much a turbo out job which is out of my capabilities but i just want to be clear that i can do the front pipe myself.

I will be using a pit to do the work.

Any help is appreciated

Cheers

Link to comment
https://www.sau.com.au/forums/topic/185828-r33-gtr-front-pipe-installation/
Share on other sites

pretty sure you don't have to take the turbos off for front pipes nismoidy. there is just 4 nuts that hold them to the dumps which you should be able to get with a long extension on your ratchet.

I havent got the money to pay for them at the moment otherwise i would, plus i think my turbos are right near the end of there life judging by the oil smoke coming from my exhaust tonight while driving around, so thats another expense :thumbsup:

I was told last service the seals werent 100% i think they have gotten way worse, any ideas on a rough cost of turbo replacement like gt2860-5r or N1's turbos would be?

Edited by Cooper

GTR to replace dumps = turbos out , front pipes no need to remove anything other than front pipes , 2 14 mm nuts on each dump , all you need is a long extension and if you have a uni will come handy for one of them .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Appreciate the feedback. It is street car, but not a daily. Last week I got a quote from a good exhaust shop for a decat, one which is bolt-on, bolt-off to be easily replaceable. I got quoted for around €150. I usually do push the motor, but I wasn't in this case to make sure that no damage is done until I get the cat sorted. I think it's best to also ask the exhaust shop for the other option and see what they can do. If (big if) I were to decat though, would it be best to tune the car or would the stock ECU handle it? As far as I know, the stock ECU is not tunable and that would require additional purchases.
    • As above, definitely bash it or get it replaced with a high flow unit.
    • get some flares on them, or wider guards haha
    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
×
×
  • Create New...