Jump to content
SAU Community

Recommended Posts

hey all i went to get a shift kit fitted in my r33, and i found out that i have a 5 speed auto and that there is no shift kit for this.

just wondering has anyone got any info at all about these? and also is there anyway to beef them up?

thanks heaps in advance.

Link to comment
https://www.sau.com.au/forums/topic/185906-5-speed-auto/
Share on other sites

oh you mean the 4-speed auto

standard is 4-speed with OD - whoops i mean't 4 speed in this :) changed it now

not sure why the shift kit won't fit in it though? as they are the same model number? and have mostly the same parts?

what number is on the box itself?

Edited by skybarge
Link to comment
https://www.sau.com.au/forums/topic/185906-5-speed-auto/#findComment-3364032
Share on other sites

wierd, R4's are the 4speed, that's that the 4 stands for

Jatco RE4R01A which is standard in most skylines, are you sure you haven't got that?

Which shop are you talking about?

Might be good to talk to MV Automatics or Knox Automatics, they'd know what fits your box.

I think they use a manual valve body upgrade from a Nissan Patrol in their kits with some welsh plugs to block off some of the holes

If you have the 5-speed it's be:

Jatco JR507E transmission

which is what come in Cimas, Presidents and a few other V8s and things and possibly some skylines, if you've got the 5 on your box number, then maybe someone put int a v8 box, changed the bellhousing, tailshaft and a few other things to get a longer drive ratio, it's a tad strange though

Link to comment
https://www.sau.com.au/forums/topic/185906-5-speed-auto/#findComment-3364596
Share on other sites

RE4R01A - 4 Speed

RE5R01A (or JR502E) - 5 Speed

Either way I know MV Automatics' have done shift kits for 5-speeds (eg. Zoom/ HPI's project 11sec 4-door) so, Im sure other competent trans specialists are able to do it.

Link to comment
https://www.sau.com.au/forums/topic/185906-5-speed-auto/#findComment-3364640
Share on other sites

wierd, R4's are the 4speed, that's that the 4 stands for

Jatco RE4R01A which is standard in most skylines, are you sure you haven't got that?

Which shop are you talking about?

Might be good to talk to MV Automatics or Knox Automatics, they'd know what fits your box.

I think they use a manual valve body upgrade from a Nissan Patrol in their kits with some welsh plugs to block off some of the holes

If you have the 5-speed it's be:

Jatco JR507E transmission

which is what come in Cimas, Presidents and a few other V8s and things and possibly some skylines, if you've got the 5 on your box number, then maybe someone put int a v8 box, changed the bellhousing, tailshaft and a few other things to get a longer drive ratio, it's a tad strange though

There was a 5 speed fitted to some skyline models - check out some past issues of Zoom mag in their R33 4 door project car. They did some upgrades to the box as well if I remember rightly.

Link to comment
https://www.sau.com.au/forums/topic/185906-5-speed-auto/#findComment-3364669
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome!  How long have you had it? And what colour is it?
    • "CAD" version 1.0 It will have a 15mm lip around the top for 6 × 5 or 6mm nutserts and fixtures (two on each of the three straight edges), and some pinch weld on any exposed edges, it has three mounting points, one of the power steering reservoir bolts, and two on the rad support, my 120mm hole saw will make short work of hole for the silicone joiner, with ample room for some pinch weld  I've also got enough Carbuilders "peel and stick" heat shield to cover the outside of it at the coolant expansion tank and on the engine side, as pictured, and internally on the lid and where the fuse box is, I've also got some thin, about 3mm, black 3M single sided sticky foam stuff that was left over after sealing some door drafts at home to help seal the lid As for the shape, it "sort of" matches the shape of the fuse box, so shouldn't look to "out of place" The lower area and hole for the intake will need pinch weld with a balloon on it to fully seal the hole and bottom of it, that will happen after it has been fabricated so I know exactly what size is required  Filter service has been trialed,  and so far it was a simple process  Just need to get some alloy, and then head into work to use the guillotine and break press in the workshop Hopefully it should be sorted in a week or two Guestimated outlay will be under a $50 for the stuff I don't have on hand (alloy, 6mm nutserts, the pinch weld, and wrinkle paint) Disclaimer: That's what the "voices in my head" are telling me how the filter box should end up getting done......lets see if they know what they are talking about  
    • Have been polishing up the trailer rims as they had been sitting in the shed for a few years and are really in need of some love. This was after a couple of passes with chrome polish - coming up quite well ✅ .
    • Welcome aboard! Is your Skyline auto or manual? I'm assuming manual. Does it have any mods done yet?
    • Hey mate, the brown and grey plugs would usually go to the TPS, brown one goes on the bottom connector and grey is the top but isn't used unless the car is auto, your TPS looks different to mine though I've got a series 2 engine.
×
×
  • Create New...