Jump to content
SAU Community

Recommended Posts

Ok guys here the story...

Driving along and notice a small leak from the rubber hose just past the twin turbo pipe. I didn't do anything for about a week :D . I no no... didnt' have any spare time so i diciced to drive underboost all the time. The car ran ok and make a very loud sucking sound.

Come to today (about 2 weeks later) I'm driving the car and not making any boost whats so ever and to my understanding it was that pipe being mega loose. So i got a mate to make me a metal pipe to replace the one that was alll busted up.

Replaced pipe and nothing. No boost and was running the same as before. Like the pipe was still off. WTF is going on?

Checked EVERY f**kING PIPE in my car atleast twice. Maybe more. It's not the pipes.

Checked the AFM and they are running ok.

The car is really sluggish to speed up when driving in any gear BUT is easy to start. No smoke on start up but heaps of black smoke with revs.

Thanks! :P

PS I hate this car when it breaks down :P but love it when it works :yes:

Link to comment
https://www.sau.com.au/forums/topic/186193-gtr-making-no-boost/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

A friend of mine started to have boost problems once and it turned out to be his CAT. The front part of the internal mesh had started to desintergrate and had sort of melted a bit so was block the majority of it, ie near zero flow.

Could it be the wastegate(s) are stuck open?

A friend of mine started to have boost problems once and it turned out to be his CAT. The front part of the internal mesh had started to desintergrate and had sort of melted a bit so was block the majority of it, ie near zero flow.

Could it be the wastegate(s) are stuck open?

hmmm... makes sense. Because it was running rich all the time. O and a nother thing to add is when I rev it from idle the revs clime then drop off really quickly and nearly stall, then fix it self.

Wierd hey! :P

The cat sound most logical cause of the amount of fuel vapuor been dumped the ceramic centre has proberly clogged up.

WOW i spent 4 hours trying to make something work and you guys come up with somehting i wouldn't even think possible! f**kING LEGENDS!

To late to try now i will do it tomorrow and report back!

I had it happen to me so thats how i knew.

Cool. So if i just drop the cat and start it up i should notice it straight away? Doing this on a sunday so no places are open that sells cats. How do I clean the cat? Bash it out? Put a Pipe though it?

cat is a remote possibility but being a GTR dave is going to be right in that its spat an exhaust wheel.

Blocked cat usually it will feel flat and retarded one blown turo will result in no boost what so ever and the symptoms you described

it wont be the cat. blown would make it feel like he just said, but theres 1 thing missing.. the black smoke. that means its runnin rich.. if the turbo was blown the afm wouldnt be reading more intake air and therefore adding more fuel... it'd read whatever was comin in. if the turbo wasnt makin boost, it wont put more fuel in.

I think u have a boost leak somewhere.. ive heard a few ppl sayin the bov's tend to leak boost on GTRs. im not sure how they work as i havent had a chance to look @ mine, but that might be a good place to start. Cats dont cause no boost, and if theyre "clogged" ud know about it.. the engine would sound like its tryin to blow massive amounts of air through a red rooster straw.. ud know about it hahah.

check the bovs out.

Edited by Bumblebee
it wont be the cat. blown would make it feel like he just said, but theres 1 thing missing.. the black smoke. that means its runnin rich.. if the turbo was blown the afm wouldnt be reading more intake air and therefore adding more fuel... it'd read whatever was comin in. if the turbo wasnt makin boost, it wont put more fuel in.

I think u have a boost leak somewhere.. ive heard a few ppl sayin the bov's tend to leak boost on GTRs. im not sure how they work as i havent had a chance to look @ mine, but that might be a good place to start. Cats dont cause no boost, and if theyre "clogged" ud know about it.. the engine would sound like its tryin to blow massive amounts of air through a red rooster straw.. ud know about it hahah.

check the bovs out.

How do i check the BOV block one of the pipe off?

I dont' think its the turbos becasue it made boost just before the pipe blew. replace pipe and no boost? How can i root a turbo with a busted pipe?

How do i check the BOV block one of the pipe off?

I dont' think its the turbos becasue it made boost just before the pipe blew. replace pipe and no boost? How can i root a turbo with a busted pipe?

O and another thing. I have a HSK after market boost gauge that goes into negative(?) before zero(?) then to 2.0 Bar if you no what i mean. The neadle sits in negative and when i give it some the guage goes to 0 and trys to go over but doesn't.

I hope that makes sense.

its a leak. The pipe may look like its on tight but there might not be a super tight seal. I suggest you re-do all the piping to make sure. It may take a while again for the little amounts of oil in the intake to seal the joins like before.

I had the exact same problem 2 weeks ago. Wouldnt make positive manifold pressure what so ever. I inspected the turbos and they were good. I re-did that damn bit of pipe straight after the merging of the two turbos with new hose clamps and the thing drove crappily. The next morning it was all good again

its a leak. The pipe may look like its on tight but there might not be a super tight seal. I suggest you re-do all the piping to make sure. It may take a while again for the little amounts of oil in the intake to seal the joins like before.

I had the exact same problem 2 weeks ago. Wouldnt make positive manifold pressure what so ever. I inspected the turbos and they were good. I re-did that damn bit of pipe straight after the merging of the two turbos with new hose clamps and the thing drove crappily. The next morning it was all good again

but when you reved the car did it almost stall on the way down?

well, it got to the point where i couldnt drive up my driveway which is only a slight incline

The revs will drop because its overfuelling severely. To nurse it home i had to hold my foot on the accelerator. So to answer your question, yes :(

I think it would have to be a leak of some sort.

If he had blown a ceramic turbine off he should have found bits of it in the cat shouldn't he?

As stated I'd be re-checking hose clamps are tight and check for cracked hoses etc. I'd be checking the vac hose that goes to the BOV as if that's not on as soon as you hit boost it will more than likely open as it won't have boost pressure from the hose to keep it closed.

You could block off the BOV by putting a thin metal plate underneath it to seal it off. Do this to just see if you can get onto boost, if so time for some new BOV's.

I think it would have to be a leak of some sort.

If he had blown a ceramic turbine off he should have found bits of it in the cat shouldn't he?

As stated I'd be re-checking hose clamps are tight and check for cracked hoses etc. I'd be checking the vac hose that goes to the BOV as if that's not on as soon as you hit boost it will more than likely open as it won't have boost pressure from the hose to keep it closed.

You could block off the BOV by putting a thin metal plate underneath it to seal it off. Do this to just see if you can get onto boost, if so time for some new BOV's.

I had look in the cat and all that fell out was black water. The cat wasn't blocked. When I rev the car HEAPS of black smoke comes out of the dump pipes. Smells like fuel. Then the car nearly dies as it revs down. like it's flooded.

The pipes are all very good sealed. All of them are checked by me a friend twice each!

The BOV are next. Ran out of time today.

If it was the turbo broken would it still make it to 0psi and not move fromt the negative psi?

Could it be the ECU retarding something to stop me making boost?

Sorry for the blunt post i'm tierd as f**k.

definately a leak somewhere. Air gets measured by the AFM, leaks out of the intake somewhere and the injectors still put in the full amount of fuel

can you hook it up to a smoke machine or maybe spray some start you bastard around and listen for raise revs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Very nice - I also have a 92 GTST and hardly see any others around these days
    • When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...