Jump to content
SAU Community

Gtr Making No Boost!

whiteboy01

By whiteboy01,
in Engines & Forced Induction

 Share

Recommended Posts

str00th Collaborator

str00th

Posted
Posted (edited)

sucking and blowing then swapping?

Wastegates actuators could be stuffed ie. the spring opening the wastegate at any pressure

To test that remove the hose running to the actuator and rev and see if it makes any more then 0psi

Edited by str00th
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

T04GTR Grand Master

T04GTR

Posted
Posted

ok, well if theye are both sucking, and wooshing etc etc. then they work.

heres what to do next. you need to block off the blowoff valves. (the pipes that come up to the airflow meter pipes.) idealy you want to block them where the are. (drivers side brake duct)

Bumblebee Experienced

Bumblebee

Posted
Posted

this is just a random thing.. but i saw someone postin, that if 1 turbo dies.. it halves the boost???

just thought id let u know and everyone else that doesnt know, that twin turbos dont work like that.. 1 doesnt make 3.5psi and the other one another 3.5psi.. otherwise ud be able to run more than 14psi on a ceramic turbo.. they both make the same boost.. but because theres 2 turbos, the actual flow is twice as much.. so if one T28 makes 400cfm @ 7psi.. then two will make approximately 800cfm @ 7spi..

as for ur no boost... its not gonna be turbos.. i still think its ur bovs.. theyre sizeable enough to leak all ur boost, without stallin ur car (they are a valve after all..) what might be happening is a vacuum line going to ur bov's might have been severed.. They need pressure in the line to stay closed and then the pressure in the intercooler piping plus the vacuum in the vac lines (going to bov) opens them up during no throttle.. maybe theres no pressure in the "vac" line to keep it closed..

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted

Shit hey 240?

I allways get ripped off. All well.

UPDATE TIME: Taken BOTH turbos out and to BUST all your bubbles it was the rear turbo. The exhaust wheel have come off and logded it self in the turbo. The front wheel wasn't turning nor was the rear. The shaft in the middle was snapped. Pretty f**ked up hey!

PICS come tomorrow. Such a relief that it was the turbos because i got abit worryed when everybody thinks it's something else. The wastegates were fine. Everything was fine. No leaks in the system no leaks in the BOV's. It was that turbo shaft that was f**ked.

All well. Now it's time for the INSTALL. Probly going to take as long if not longer. So far it's taken 7 hours to take them out...

T04GTR Grand Master

T04GTR

Posted
Posted
this is just a random thing.. but i saw someone postin, that if 1 turbo dies.. it halves the boost???

just thought id let u know and everyone else that doesnt know, that twin turbos dont work like that.. 1 doesnt make 3.5psi and the other one another 3.5psi.. otherwise ud be able to run more than 14psi on a ceramic turbo.. they both make the same boost.. but because theres 2 turbos, the actual flow is twice as much.. so if one T28 makes 400cfm @ 7psi.. then two will make approximately 800cfm @ 7spi..

as for ur no boost... its not gonna be turbos.. i still think its ur bovs.. theyre sizeable enough to leak all ur boost, without stallin ur car (they are a valve after all..) what might be happening is a vacuum line going to ur bov's might have been severed.. They need pressure in the line to stay closed and then the pressure in the intercooler piping plus the vacuum in the vac lines (going to bov) opens them up during no throttle.. maybe theres no pressure in the "vac" line to keep it closed..

yeah. bovs is the next logical step. ps.. with no vac lines hooked up it will still hold 10 pound :ninja:

T04GTR Grand Master

T04GTR

Posted
Posted
no boost at all? does it sound abit funny out the exhaust? id be suspecting a ceramic turbo failed. ive had ones die on standard boost with no mods.
Shit hey 240?

I allways get ripped off. All well.

UPDATE TIME: Taken BOTH turbos out and to BUST all your bubbles it was the rear turbo. The exhaust wheel have come off and logded it self in the turbo. The front wheel wasn't turning nor was the rear. The shaft in the middle was snapped. Pretty f**ked up hey!

PICS come tomorrow. Such a relief that it was the turbos because i got abit worryed when everybody thinks it's something else. The wastegates were fine. Everything was fine. No leaks in the system no leaks in the BOV's. It was that turbo shaft that was f**ked.

All well. Now it's time for the INSTALL. Probly going to take as long if not longer. So far it's taken 7 hours to take them out...

:ninja:

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted
:)

UPDATE TIME

Finsihed putting the new turbos on. Thanks Hyperdrive Motorsport f**king legends! BOY O BOY the difference the new turbos make. The old ones must of been f**ked or piping isusses? Anyways did some upgrading of the old clamps, bolts, gaskets,nuts ect and the differnce is F**CKING AWESOME. Spool time is nearly instant and power pulls something curl! Another thing is i can here the blow off values heaps more now. Whats the go?

Risking Grand Master

Risking

Posted
Posted (edited)
Blocked cat usually it will feel flat and retarded one blown turo will result in no boost what so ever and the symptoms you described cat is a remote possibility but being a GTR dave is going to be right in that its spat an exhaust wheel.
no boost at all? does it sound abit funny out the exhaust? id be suspecting a ceramic turbo failed. ive had ones die on standard boost with no mods.

Hmmmm way back on page 1!!!!!!!!!!!!

Edited by Risking
whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted

Sorry if i didn't believe you guys way back on page1 but it is alot easier to remove your cat then to remove your turbo....

It's not making more boost becasue it's still making 0.8bar. Just feels alot more boost but not. Thanks guys.

whiteboy01 Collaborator

whiteboy01

Posted
  • Author
Posted

<object width="425" height="350"> <param name="movie" value="

</param> <embed src="
type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

I made it to the show and shine in Geraldton on sunday. I did a dyno run and got 201 with winding out 4 and hitting the 180 limit. Theres the video!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • KyoyaR33
      Rebuilt Rb25det issues

      By KyoyaR33 · Posted

      I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • GTSBoy
      Rebuilt Rb25det issues

      By GTSBoy · Posted

      Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Victory
      Neil's R33 Gts-t Build

      By Victory · Posted

      Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Milkmun
      S15 Spec R

      By Milkmun · Posted

      Wow that's a steal, you've done well there. 
    • trey318
      r34 gtt led globes

      By trey318 · Posted

      Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...