Jump to content
SAU Community

Recommended Posts

Hey people

CAR: Nissan Skyline R33 GTS25T

MODS: Fmic, Bov, EBC, Air filter

After i installed my fmic it is now crunching in 5th. I has never cruched it 5th not really at high revs but aroung the 100km mark....................do you think is clutch problem, or do i need a fuel pump, or what .....

ideas need

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/
Share on other sites

I doubt the FMIC install affected your crunching in 5th. Probably just a coincidence, does it do it every single time you shift into 5th? Try double clutching and see if it helps.

Also, what does a fuel pump have to do with your gears crunching? :mellow:

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3367858
Share on other sites

I doubt the FMIC install affected your crunching in 5th. Probably just a coincidence, does it do it every single time you shift into 5th? Try double clutching and see if it helps.

Also, what does a fuel pump have to do with your gears crunching? :mellow:

I dunno about that the fuel pump has to do........just a thought

double clutch it ............... i know how to double clutch

but what double clutch in 5th

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3367880
Share on other sites

how can your car idle at 6000rpm? do you mean 600rpm? coz 600 is normal.

NA NA NA NA SORRY BOYS

I MEANT 600

my idle needs to be a 750

reckon my idle need to be up

i was also told it might also be a spark plug problem

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3369895
Share on other sites

You car idling at 600rpm has nothing to do with gears crunching in 5th dude.

It also (the crunching) has nothing to do with a FMIC.

5th crunching is the synchro's letting go or the clutch being a bit so-so possibly in some way.

Totally unrelated to the points you've raised here

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3370035
Share on other sites

You car idling at 600rpm has nothing to do with gears crunching in 5th dude.

It also (the crunching) has nothing to do with a FMIC.

5th crunching is the synchro's letting go or the clutch being a bit so-so possibly in some way.

Totally unrelated to the points you've raised here

thank for that.................. Well i have Xtreme heavy duty cutch ....and my pedal is a bit high

this is wierd cause it only happen when it is above 100km not under

Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3370161
Share on other sites

just wear on you synchro's man. try double clutching as mentioned. i don't know enough to explain it, but it feels like releasing the clutch and then pushing it in again gives things a chance to align more nicely than doing the whole change in one motion.

e.g.

clutch > de-select 4th > neutral (clutch position same as when de-selecting 4th) > select 5th > release clutch [things haven't had a chance to re-align from a neutral point]

v

clutch > de-select 4th > release clutch > true neutral > clutch (fresh clutch engagement :P ) > select 5th > release clutch

[things have hit neutral without the clutch affecting it - the best starting point to select any gear. it's just a more box-friendly and often a more solid engagement]

remember 5th is also possibly the least 'sure holding' gear in your gearset and in worn boxes can just slip out of gear. think of it as if you're rock climbing and 5th is the last hand hold and you have to stretch and grab it with just the tips of your fingers... errm.. [note to self, shut the f*ck up with all these weird analogies you come up with!?!?]

Edited by made_guy
Link to comment
https://www.sau.com.au/forums/topic/186274-crunch/#findComment-3373582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for ?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for  >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate modern almost all cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
    • Let's be wary though, if cranking is so far off, what else isn't set right? Are the dead times set right, voltage compensation etc?   It definitely sounds like it's cranking fuel issues, and holding flat to the floor is shutting them down, but I'm with Duncan that if nothing was changed in the ECU at all, and then this started, I'd be more thinking a leaking injector.   Do as Duncan said, drop the oil and make sure it's not full of fuel.
    • It actually means give it less throttle.
    • Yeah if the goal is to drive something then modifying a car is a bad idea.
    • Wowee! She looks like a major handful out there Pete!
×
×
  • Create New...