Jump to content
SAU Community

Front Conversions On A Ceffy

collins

By collins,
in Four Door Family & Wagoneers

 Share

Recommended Posts

funkymonkey Grand Master

funkymonkey

Posted
Posted

common swaps are laurel<->ceffy as they're virtually the same chassis, even the dash bolts in from the other and keeps to the same door trim lines.

then you have silvia fronts on ceffies (god knows why, they look almost the same)

and finally R32 and 180sx fronts.

There is a dude who did a BMW 3 series front on a ceffy too in the UAE or something along those lines.

I reckon VL Holden front end on a ceffy would look gangster. :laugh:

  • 2 weeks later...
TAKUSHI Proficient

TAKUSHI

Posted
Posted
This one always gets a laugh from me Wan's Skyfiro

672846_55.jpg

duuuude haha this car got fkt rite up yet he still put it back together, as much as i love my cefiro i doubt i'd go through all of that for it if i smacked it that bad

jus the cost an time factor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 headlights?

      By Duncan · Posted

      It might be worth having a good look at the chassis behind the bumper then; most people prefer the series 2 look so it might have been changed to cheaper parts as part of an earlier repair
    • Celticsfan03
      S1 headlights?

      By Celticsfan03 · Posted

      The car itself a series 2. I was just curious about the headlights and just wanted to confirm that they were series 1. Good to know the rest of the front end is series 1. It’ll be easier for me to find parts on the aftermarket side of things lol
    • WMDC35
      R34 engine swap Rb25de neo to s1 Rb25det

      By WMDC35 · Posted

      If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • GTSBoy
      R34 engine swap Rb25de neo to s1 Rb25det

      By GTSBoy · Posted

      THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
    • GTSBoy
      Factory oil temp sensor in a RS4V without gauges?

      By GTSBoy · Posted

      Light should be a pressure switch, not a sensor.
×
×
  • Create New...