Jump to content
SAU Community

Recommended Posts

Lately when my 33 comes on boost, I hear a strange whistling noise coming from my HKS 2530kai turbo, not sure if its a hose or the turbine itself.. The turbo is only 1 year old and I only boost it to around 16psi, so I wouldnt think that its the end of the turbo, must be something else.. Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/186377-strange-noise-from-hks-2530kai/
Share on other sites

im assuming it didnt do it always but?

My old turbo made a whistly type noise but in hindsight it was more of a whir...it eventually broke a shaft due to an imbalance.

The new 3076R that is on there now with the antisurge does however make a genuine whistle..kinda like a truck

Even one of the 33's i had with the same turbo made a similar noise its kind of nice though............So many people said my turbo on its way out..but i been thrsahing it with 16psi but still goes healthy..........new owner still happy

Edited by chzz
It's the anti surge mod on the front of the compressor housing. Makes it whistle like a mofo

yes i know this, its a loud whistling sound when it comes on boost, but its a different noise, its never made this noise before..

What power are you putting out on 16psi? And when do you get full boost by on the 25?

233rwkw.. installing PFC + HC, Bosch 023 fuel pump and Z32 AFM on Friday, hoping to get around 250-260rwkw.. Full boost hits at around 3500rpm(very responsive)..

Anyone had this problem before? I don't think the turbo is on its way out, as its only 1 year old.. :S

Edited by EVL-R33

Have a look at the 4 bolts that on the manifold to turbo flange...those bolts work themselves loose over time as well especially if you do not have the locking tabs on it...my first guess is that its leaking through that gasket...

Have a look at the 4 bolts that on the manifold to turbo flange...those bolts work themselves loose over time as well especially if you do not have the locking tabs on it...my first guess is that its leaking through that gasket...

yeh this has happened to me before, and ive put on locking tabs.. also that gasket from the exhaust manifold to turbo is new..

the noise is like a high pitch surge, and comes on at around 7 - 10 psi.. before that i cant hear it.. the car still goes fine..

Had the same problem on my car...locking tabs were there and gasket was newish...only got that funny surging whistling sound at above 12psi...i re-tightened the living daylights out of the nuts and put the tabs back on and the sound went away...it might be worth a shot...good luck...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. a little later but if the topic is here. So...the exhaust is the same and you can use 25/Turbo or any aftermarket? What about intake side? Is it too "plug n play" or? (i do not remember for 100% but i think that one intake to head gasket was little bit different than on the RB25 - i bought gasket kit way back) I know that even if it "plug" those butterfly swirls would cause ECU to be confused or?   Just asking for the info 🙂 and of course the RB25 things are easier to come by  
    • A few more recent pics
    • full send the cnut, do this   fark the wrapping and/or stick on siet. These guys are the ones to go to: https://www.realthermo.com.au/  
    • Just had a look, they don't. Fuelling on the base map is purely alpha-N, and the ignition table is MAP. Remember it's just a base map to get the car moving  
    • Hi everyone, I’m Dave from Canberra. Here's a few pics of my 1992 R32 GTST coupe which I imported back in 2006. Only mods so far are HKS Hi-power cat back exhaust, K&N filter, ATC Volanti steering wheel, Pioneer stereo, amp and sub. This was my daily driver up until 2015 and sadly hasn’t been driven at all in the last 5 years due to marriage, work, and kids taking up most of my time and spare cash.As such its in need of a bit of TLC and one of my goals for this year is to get it back to running condition and maybe look into club/historic rego. I’ve joined SAU so I can ask a few questions along the way (although I promise to google Current Problem +SAU beforehand!)
×
×
  • Create New...