Jump to content
SAU Community

Recommended Posts

Oh o.

I have just put DBA 4000's on the front and rear with Hawk HT-10's front and rear. Might have to keep an eye on them. They cooked the fluid fisrst time at the track but thats my fault for not flushing and changing the fluid with some good stuff. So what does the paint on the rotor tell me. So the set up is a R32 GTSt with UAS adapter plate to run DBA 4000 GTR rotors with Hawk pads.

Cheers

  • Replies 177
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Gary from what I've seen the difference is simple.

slotted DBA 4000 crack.

unslotted 4000 and any 5000 series seem to be OK, I'm sure there are differences in design that is making the difference. there have been waaaay too many slotted 4000s crack in the last 18 months to be coincidence and dba are doing their business real damage in the enthusiast market by ignoring and denying the problem.

Interesting read.

I'm in the process of upgrading my brakes and was thinking, RDA or DBA slotted rotors front and rear, QFM KR750 pads, and braided lines all round.

Now having read all of this it sounds like thats a bad idea as they're just going to crack....So my question is, what options are available to me? Doesn't seem to be many...

Car is a S2 R33 GTS-T, 250~rwkw, daily driven so need a pad that will work on the street as well as take some track work.

  • 4 weeks later...
they claim they are 'heat treated' I'll give them some fking heat treating. my next set will be project mu or endless. I have a new set of RDA sitting here and will give them a crack but I'm not putting too much hope out there.

+1 for endless, running their slotted disc with my ap's and they love the abuse :down:

Gary from what I've seen the difference is simple.

slotted DBA 4000 crack.

unslotted 4000 and any 5000 series seem to be OK, I'm sure there are differences in design that is making the difference. there have been waaaay too many slotted 4000s crack in the last 18 months to be coincidence and dba are doing their business real damage in the enthusiast market by ignoring and denying the problem.

You could be right, I am still using the 4000 series rear rotors that are at least 3 years old, compared to the third set of front rotors but they are 5000 series. Maybe the newer 4000's are the problem.

Cheers

Gary

  • 3 weeks later...
Ok I recently became a victim of the dreaded cracked DBA 4000 rotor club. Wasn't overly impressed as they were near new. But with the rotors on the bench and inspecting the rotors with DBA it appears as though there could be a fault with the caliper and the use of the rotor…combined with the fact they were used for a hard stop from over 200km/h when cold at an airport run.

So looking at the rotor the outside face (the side that cracked) has obviously run hotter then the inside face. This is evident by the blue hue in the rotor face as well as the paint markings on the outside of the rotor where two of the three thermal paint stripes have been completely burnt off. All whilst the inside face is only on the middle temp paint with all three stripes still being visible and a shiny silver as you would expect.

So, differential expansion as a result of a big temperature gradient hasn't helped these rotors. Combined with the big hit of heat when cold. The rotors are off for some more testing and inspection. Will post up the feedback when I get it.

But some things we all may want to check. Make sure your pistons are not dragging the pads on the rotor. This is a possibility in my application even though the calipers have been rebuilt. Perhaps where was a bit if run out (doubt it) or the design of thw wheel limits airflow to the outer face (doubt it) Most likely pistons rubbing the pad on the rotor a little, or when I jump on the brakes the outer pad works a lot harder then the inner pistons.

Now finally, especially since its been a buzz topic lately. Be careful if you are going to be running brake ducts. I trialled some ages ago but took them off because I was not happy with them, and decided I would wait and do it properly when i get my new Brembos on. But if you are running DIY ducting ensure that the ducting is directed the centre of the rotor and the air then travels up through the vanes of the rotor. Simply ducting it towards the inner edge could lead to one side of the rotor (inner) running cooler then the outer face. This gives rise to differential expansion which is a known problem for stressing steel components. The main reason I removed my ducts was that I wasn't satisfied that in the wet they woudlnt be guiding water/mist onto the inner edge causing massive temperature differentials and thermal shock to the rotor. I had not really considered that air itself could have resulted in a 200degC temperature differential across the rotor.

Hi,

I've been reading all these posts with great interest up to page 4-5.

I'm due for front rotors soon and yes, learning along the way, I've decided to go for G4 or DBA5000 where the slots don't go up to the edge

Two Reasons

1) Being a chemist, I've noticed that tablets that are scored (ie slotted) across the middle are harder to break if the score doesn't reach the edge and

2) Having cut glass for leadlight many times, it's much easier to break the glass if I start the glasscutter from right over the burr of the edge - meaning it's hard to snap the glass panel unless I start from right at the edge.

Therefore the newer DBA4000 rotors are simply a very bad design - and they'll need to change it quick.

As they say in business: it takes 10 years to build up trust - and 10 minutes to lose it!!!

Chow

Hi,

I've been reading all these posts with great interest up to page 4-5.

I'm due for front rotors soon and yes, learning along the way, I've decided to go for G4 or DBA5000 where the slots don't go up to the edge

Two Reasons

1) Being a chemist, I've noticed that tablets that are scored (ie slotted) across the middle are harder to break if the score doesn't reach the edge and

2) Having cut glass for leadlight many times, it's much easier to break the glass if I start the glasscutter from right over the burr of the edge - meaning it's hard to snap the glass panel unless I start from right at the edge.

Therefore the newer DBA4000 rotors are simply a very bad design - and they'll need to change it quick.

As they say in business: it takes 10 years to build up trust - and 10 minutes to lose it!!!

Chow

It's catch 22 with slots. If you don't take them to the edge, then they simply don't work as well in their wiping function. The trapped gas and loose material can't escape the slot, so it builds up under the outermost portion of the pad (the outer end of the slot). This decreases the braking performance and causes uneven pad wear.

Cheers

Gary

It's catch 22 with slots. If you don't take them to the edge, then they simply don't work as well in their wiping function. The trapped gas and loose material can't escape the slot, so it builds up under the outermost portion of the pad (the outer end of the slot). This decreases the braking performance and causes uneven pad wear.

Cheers

Gary

The G4 kit doesnt take the pad all the way to the edge, so it should avoid that problem. Also the radial direction of the DBA4000 slot seems to contribute to the stress build up. On other designs the slots are about 45 degrees to the tangent, rather than being almost 90 degrees.

Hi,

Just got a price on getting some blank DBA heat treated rotors (4000's????) and getting SCBC to machine some wiper slots in them more like the project mu's for $630.00 a pair to suit the front 324mm brembos.

Do you think these will have a greater chance of not cracking or is the cast metal just not up to the task of hard braking?

Cheers,

Ryan

Hi,

Just got a price on getting some blank DBA heat treated rotors (4000's????) and getting SCBC to machine some wiper slots in them more like the project mu's for $630.00 a pair to suit the front 324mm brembos.

Do you think these will have a greater chance of not cracking or is the cast metal just not up to the task of hard braking?

Cheers,

Ryan

Well to be perfectly honest for the amount of messing about & the cost - why don't you just import some Project Mu rotors & be done with it?

As has been said it is not believed to be a metallurgical problem moreso a problem derived from the use of the small return slots around the outer circumference of the rotor.

Well that is some good news. The Stoptech gear certainly move some air through the rotors.

Not exactly light weight, however.

But the big question is: How much?

The one disappointment of the Priject Mu 2 piece was the lack of proper vanes, although they are better in that regard that the DBA gear.

I can add my same experiences to this thread too.

I cracked 2 sets of 296 Dba's before I went to 324mm on the front of my 32GTR.

I have now cracked my second set of 324s. After cracking the first set, I ran ducting to the centre of the disks, and still cracked the disks.

So.... DJR81 like you I'm swaying towards the Project Mu's. How have you found them ?

And more importantly have you run them at barbagello more than once ? I can get a year of sprints out of a set of disks, but as soon as i take them to a long circuit where braking from a high speed is involved, they crack, (from the slots in the 4000's.)

Stoptechs are a second thought, but they seem to be about twice the price ?

The most annoying thing is, that if i had not given dba the benefit of the doubt I could have saved a lot of money or upgraded seriously with the same dollar amounts i have wasted.

Anyone else using Project Mu's ?? or will i crack them too ?

Got some advise regarding cracking/crazing rotors from a brake joint in Penrith.

He said that cryogenically treating them makes them less likely to go to crap out, but it doesn't make them last longer.

Might try it out on the next set of rotors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
×
×
  • Create New...