Jump to content
SAU Community

Recommended Posts

Has anyone run a twin exhaust on there 33? not on the same side running one to the left hand side and one to the right?

Is there enough room down the right hand side to run it?

At the moment i have a 3inch stainless steel exhaust so i thiugh of joining in after the cat to run another 3inch pipe to the right, but unsure if theres room.

and i only wanna do it for looks

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/
Share on other sites

yeah i've done it, it's a mission but.... got it sittin at home cause i pulled it off as it was heating up the boot pan too much and has some clearance issues when going over big bumps but it is possible

oh ok nice.. do you have any pics of what it looked lik?

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3371735
Share on other sites

brilliant.

why not buy a cannon muffler, and cable tie it to the other side of the rear of the whale?

ALA Corolla's and civics bro.

then you got da looks and not da cost.

good izdz. but wat about running two cannons next to eachother? kits available. increases midrange torque.

dont worry about gtst man, just ignore him he never says anything positive.

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3374906
Share on other sites

good izdz. but wat about running two cannons next to eachother? kits available. increases midrange torque.

dont worry about gtst man, just ignore him he never says anything positive.

Can you explain how that would increase midrange torque?

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3375165
Share on other sites

Can you explain how that would increase midrange torque?

Im interested in the response to that aswell.

I dare say the answer will be 'interesting' :sorcerer:

But yeah, as GTS-T said.

Just put another muffler on the side if you want looks. No point hooking up pipe to it all as it wont offer any gains, add weight, and cause the car to be low and hard to get over speed humps etc.

So just get the angle grinder out and cable ties and then you'll have the looks

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3384198
Share on other sites

I've got a twin exhaust, be warned though that it's neither cheap nor easy to do. Mine is 3" to the diff where it splits to 2 x 2.5". I've made modifications to both the rear bar and the spare wheel carrier to make it fit properly. The exhaust work was done by Mercury Motorsport in Brisbane.

TwinsandWheels004.jpg

TwinsandWheels003.jpg

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3384731
Share on other sites

Im interested in the response to that aswell.

I dare say the answer will be 'interesting' :sorcerer:

But yeah, as GTS-T said.

Just put another muffler on the side if you want looks. No point hooking up pipe to it all as it wont offer any gains, add weight, and cause the car to be low and hard to get over speed humps etc.

So just get the angle grinder out and cable ties and then you'll have the looks

Hey man.. don't be so negative. :(

it will produce more midrange torque due to the way it's designed.

because there are 2 pipes it means more money was spent.

this in turn leads to lighter wallet, a feeling of stupidity, and a the need to lie about it to people you don't know on the internet.

therefore, applying the formula:

need2Bdifferent + feelinstupiddue2xtracost = need2lie2intraweb.

this forumula then manifests itself in to the theory we call "thefirstbullshitreasonyoucancumupwith"

Therefore, twin exhausts = increase in midrange torque.

You should know this man..

Edited by GTST
Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3384804
Share on other sites

Hey man.. don't be so negative. :dry:

it will produce more midrange torque due to the way it's designed.

because there are 2 pipes it means more money was spent.

this in turn leads to lighter wallet, a feeling of stupidity, and a the need to lie about it to people you don't know on the internet.

therefore, applying the formula:

need2Bdifferent + feelinstupiddue2xtracost = need2lie2intraweb.

this forumula then manifests itself in to the theory we call "thefirstbullshitreasonyoucancumupwith"

Therefore, twin exhausts = increase in midrange torque.

You should know this man..

skoold'

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3385109
Share on other sites

Hey man.. don't be so negative. :dry:

it will produce more midrange torque due to the way it's designed.

because there are 2 pipes it means more money was spent.

this in turn leads to lighter wallet, a feeling of stupidity, and a the need to lie about it to people you don't know on the internet.

therefore, applying the formula:

need2Bdifferent + feelinstupiddue2xtracost = need2lie2intraweb.

this forumula then manifests itself in to the theory we call "thefirstbullshitreasonyoucancumupwith"

Therefore, twin exhausts = increase in midrange torque.

You should know this man..

gold

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3385160
Share on other sites

This Thread is a prime example of why each skyline state needs a fight club meet every 1/4 or in laymens terms every three months. So everyone who goes on the cruise to enjoy their cars and other peoples cars also has an option at the end of the cruise to enter "The Ring Of Internet Heros".

So at the last meet point theres a ring set up and who ever has gripes or what not deals with it once and for all. The loser gets to shut the f**k up.

Thus ending the needless (countless) communications and clogging up SAU forums. So put down your keyboards and raise ya fist's and do it the old fashion way.

+1 :dry:

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3385186
Share on other sites

This Thread is a prime example of why each skyline state needs a fight club meet every 1/4 or in laymens terms every three months. So everyone who goes on the cruise to enjoy their cars and other peoples cars also has an option at the end of the cruise to enter "The Ring Of Internet Heros".

So at the last meet point theres a ring set up and who ever has gripes or what not deals with it once and for all. The loser gets to shut the f**k up.

Thus ending the needless (countless) communications and clogging up SAU forums. So put down your keyboards and raise ya fist's and do it the old fashion way.

+1 :dry:

Wow this has taken a turn i wasnt expecting.... All i wanted was a few pics of what the twin exhaust looked like... the veilside was a great example, love the look of that....

People want different things out of there cars, i wouldnt have a go at you GTST what ever you wanted to do to your car, even if i thought it was a bad idea... Why you have to come into peoples thread and say stupid s**t all the time is beyond me. dont you have anything better to do? You worry about your car and ill worry about mine, cos at the end of the day ill forget everything yopu have said and only take in advive from the people who know what there talking about

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3385251
Share on other sites

you said

and i only wanna do it for looks

I thought it was a stupid idea..

however, I also said

why not buy a cannon muffler, and cable tie it to the other side of the rear of the whale

people are so f**king sensitive these days.

you didn't like that I didn't think you had a good idea?

Go have a cry emokid!!

for f*ks sake

+1 for meetup beatings.

Link to comment
https://www.sau.com.au/forums/topic/186534-twin-exhaust/#findComment-3386556
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...