Jump to content
SAU Community

Recommended Posts

Hi peeps.

I need help on what video camera to buy.

I just bought a panansonic hdd 30gb job.>>GO HERE FOR VID CAMERA<<

After a little use i decided to have a look at the quality of the film on the computer.It was definently not what i had expected.when you look through the lcd screen you think it will be good but when it comes to full view,to me i have seen better quality tape camcorders,i cant see what all of the rage is about.sure it is convenient to transfer data.but i dont really care about it if the quality is not going to be there.so im going to get my money back within the 7day customer satisfaction period.

I was looking at the 3ccd panasonic camcorder.This one is only a few hundred more than what i have paid for my current camera as you can see.>>GOOD GUYS VIDEO CAMERAS<< also i have seen the quality off the dvd camcorders,what i was going to get untill i got hdd,which are pretty good.

Another reason i went his way was because i will be shooting some in car footage and i thought that the dvd will skip while recording.does it??

What way should i go?

Link to comment
https://www.sau.com.au/forums/topic/186594-what-video-camera-to-buy/
Share on other sites

Hi peeps.(This thread is posted elsewhere in the photography sect also)

I need help on what video camera to buy.

I just bought a panansonic hdd 30gb job.>>GO HERE FOR VID CAMERA<<

After a little use i decided to have a look at the quality of the film on the computer.It was definently not what i had expected.when you look through the lcd screen you think it will be good but when it comes to full view,to me i have seen better quality tape camcorders,i cant see what all of the rage is about.sure it is convenient to transfer data.but i dont really care about it if the quality is not going to be there.so im going to get my money back within the 7day customer satisfaction period.

I was looking at the 3ccd panasonic camcorder.This one is only a few hundred more than what i have paid for my current camera as you can see.>>GOOD GUYS VIDEO CAMERAS<< also i have seen the quality off the dvd camcorders,what i was going to get untill i got hdd,which are pretty good.

Another reason i went his way was because i will be shooting some in car footage and i thought that the dvd will skip while recording.does it??

What way should i go?

im looking through the myrid of cameras atm.its really pissing me orff.here i was thinking that i had bought a good camera when bam.what a kent!

http://panasonic.com.au/products/details.cfm?objectID=3696

only prob is that good guys dont have it catalouged so i dont know for certain if they can get it or not.

thanks for the input so far keep it coming.

Tape is still what the pros use...

Every camera over $2000 is tape...

Reason why is it is fail safe, does not suffer from heat, magnetic fields or vibration... Perfect for in car use...

If you want quality footage then id suggest the HV20 (Canon) have a look online at the reviews, it is awesome with true 1920x1080 progressive capture on a CMOS sensor...

You will be spending a solid $1600-1700 tho for this unit, if thats too much then just buy a cheap tape camera $400-500 (like the MD160) as it will be better than 90% of the HDD cameras out on the market at the moment...

if you plan on doing any in car stuff then atm there is only one option. mini DV. both hard disk and DVD cams are susceptible to sharp knocks, and even vibration can kill them at worst and give you bad footage at best. and if you want really good quality then you need a 3CCD camera. so narrow that search to mini dv 3CCD cams and you will be onto a winner. for handycams i've always liked JVC and I have one now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Absolute Legend 🍻 After fighting with the scanned ones for the last 10 years this is a God send 
    • ATTAKD 356mm Brake Kit for R34 GTT or R33 GTST. Same brake kit as per here from JJ: https://justjap.com/products/attkd-brake-kit-nissan-skyline-r34-99-02?currency=AUD Can confirm these will bolt directly to a R33 GTST with 12mm bolts OR to a R34 GTT (which is what I had) with the supplied bolts and the collets for the 14mm bolt holes in the R34, which are included. Also included is a set of rotors and hats, as well as 2x brake pad sets. 1) DBA XP (street, hills) 2) Forza FR6 (track) These are radial mounted and bolt directly to R33/R34. You will need extended brake lines to avoid them being full stretch on lock - this is common for all BBK's with the bolt point being in the center. In my case I welded another stud about 25mm lower than the OEM one and retained stock lines and fittings. You'll want a BM57 BMC to get the most out of these. I speak from experience. $1800 (neg for SAU people), located SE Suburbs Melbourne.
    • Set of R33 GTST Calipers, Rotors and Pads. Calipers just taken off my car, rebuilt about ~30,000km ago. Rotors have done about ~20,000km total since new. Pads have plenty of meat. One set is DBA XP (road, hills) and the other set is Forza FR6 (track) Still working perfectly, not rusted, or seized or whatever the hell that greets used brakes. All clips, bolts, retainers, slide pins etc included. Also have OEM handbrake shoes I can throw in there if you're doing a conversion. $650 for the lot, SE Suburbs Melboune/VIC
    • I feel I have covid right now. I spent the time between Dec 21 and Jan 31 pretty much working 16 hour days on the car after it got back from paint. It turns out you generate a long list of "things to do" while the car is off the road but functional. After going to visit my mate for a "Couple of hour job" doing the brakes, 3 full days later I got home There was more on the list, (it got added to while sleeping on couches) but as everything on the list got enthusiastically crossed out as it happened, I've actually forgotten what they were. From memory there were bushes that had to be pressed in and out, washer jets to fit, etc. Some Gregging highlights: 1) The panel shop covered up my washer jets and painted over it. Good job, I think. We had to drill the new bonnet to fit new ones, which was understandably extremely scary. 2) My handbrake on the RHS is f**ked. After never adjusting it forever and learning on the fly, this one is still on my to-do list. It tightens when you pull the lever, but at about 10% of the tension that the passenger side does. Thoughts on what causes this would be great. 3) Pouring an entire liter of brake fluid over the reservoir because I forgot how to use my pressure bleeder. DON'T PUT FLUID IN THE RESERVOIR. IT WORKS BY USING PRESSURIZED AIR NOT PRESSURIZED FLUID.   471907729_9242915229093447_2708910336906717367_n.mp4  I can confirm the vents work great though. 4) Some of the bodykit fixings were f**king awful. I'm talking screwed in with what was at most a 2mm screw, and could flap the kit around by hand. Too many others to mention. They came in, went out of my brain forced by other stupid tiny things that came up and "While the car is on the damn hoist we can fix them" which was a mission in and of itself, because the car has skirts and is thus a pain to put on hoists. Because we had to buff the windscreen to get rid of the overspray, I also had to very gently wash the car. The "Run 3 wires" task was to re-attempt another gregging thing which was: The LS1 ECU in Australia does not have oil pressure wiring because the Commodores do not have a 'real' oil pressure switch The Corvettes in the USA do have oil pressure wiring because Corvettes have a real oil pressure switch. The ECU is the same physical ECU. So what I could do is pull the ECU apart, run 3 more pins and run it to the OEM oil pressure ECU, and the ECU should do this. What actually happened is that Greg did this with some not-so-proper-wiring/connectors to the ECU pins which 'might?' be okay put the car back together, and then the fuel pump wouldn't prime. So you can imagine I immediately undid all this work, put the ECU back into it's original configuration, thought I'd do some more research about what connectors the LS1 Ecu actually uses... and try again later. Except still no fuel pump prime. After a lot of sadness and checking/double checking it turns out it was the relay in the boot that controls the fuel pump. All I did was switch the trigger wires and it worked fine. I looked at the relay and it was covered in bog dust and was unknown years old. It's since been replaced and working fine. After I got the actual connectors, and the wires were ran I gathered my strength and repinned the ECU and Voila! I apologize for these MMS  472164532_8829400773820369_5410969472548349643_n.mp4  And even via ODB2 on the headunit, woo. Now Torque Pro can raise hell on track if it gets too low. It has a wonderful EMERGENCY_DISTRESS_SINGAL style warning if it goes below a certain threshhold. 472585876_9345134268844369_146554337148747327_n.mp4 TLDR: Car great. HFM kit works. So much cleaning. Buy my old stuff. Thanks.   
    • That's a hell of a question right there and so broad that you could get 100 different answers and have them all be correct.  To avoid me typing up a 2000 word thesis that doesn't answer your question, do you have specific things you are unsure of? Does the car currently handle in a way that you don't like? Or is it closer to, you think the car drives fine currently. But you'd like it to be better, but you don't know what that 'better' is or what that 'better' feels like?
×
×
  • Create New...