Jump to content
SAU Community

R32 Gtr 1990 Gunmetal With 18' Prodrives

Antimatter
 Share

Recommended Posts

Antimatter Experienced

Antimatter

Posted
Posted (edited)

Nissan R32 GTR. This is a VERY well cared for non-accident car (Grade 4 vehicle) - Clean, straight body and paint. This car has been regularly serviced - recent cambelt, water pump and front seals (all done here). New tyres, genuine K's, tight mechanicals and lots of expensive and tasteful modifications.

Mods include:

Prodrive 18 inch Wheels with new tyres

Cusco coilover suspension

HD Swaybars

Cusco 1.5 way LSD

ARC Oil Cooler

R34 GTR Intercooler

Trust 95mm Exhausts (Quiet...) and frontpipes

Greddy Vernier Camgears

HKS EVC Boost Controller

Apexi EL Boost Gauge

Mines ECU

R33 GTR Driver Seat

This car drives very nicely (better than most GTR's of this vintage) and is an excellent example of a R32 GTR. No accident history - If you are in the market for a clean GTR - then this one deserves your consideration. Inspections are welcome - Please contact me on 0408564877 or via email. Vehicles location is EASTERN SUBURBS. More photos are available for serious interstate purchasers.

Looking for ~ $21000

[email protected]

0408564877

e6c5_1.JPGe725_1.JPG

e7b2_1.JPGe81b_1.JPG

eab5_1.JPGeb0c_1.JPG

Edited by Antimatter
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Lets play a game - What is causing my oil consumption?

      By TurboTapin · Posted

      Hey, like MBS206 mentioned; I dropped off my short block and rotating assembly Monday. With a quick verification, he believes he can clear it up with just a hone and new rings but he will confirm once the rotating assembly is out. If I were you, I would either go stroker or just replace the block if it does need to be bored over to next size. Block is cheaper then forged pistons. 
    • drifter17a
      Coc or nox of nissan skyline

      By drifter17a · Posted

      live in the UK, and London has introduced a Low Emission Zone (LEZ) that requires individuals to pay £13 if their car doesn’t meet the required emissions standards.   The standard specifies that NOx emissions must be less than 0.08 g/km (i.e., the vehicle must meet Euro 4 standards or better, which generally results in NOx levels of around 0.08 grams per kilometer).   I reached out to Nissan UK, and they advised me to contact Nissan Japan directly. Does anyone have contact details for Nissan Japan or any certifications of conformity that show the emission details or NOx levels for the RB25DET engine?   Any guidance would be greatly appreciated.
    • Butters
      Exhaust silencers/varex exhausts

      By Butters · Posted

      these guys recommended to me and supplied custom 4 inch mufflers, couldn't be happier. They will spec a muffler to your preferred level of sound and know RB's well.  https://spmufflers.com.au/
    • CRSKmD
      Import insurance in 2025

      By CRSKmD · Posted

      Yeah this used to happen to me every year and a quick call would at least raise the agreed value back up / reduce the premium, but usually both.    That said for the first time on the renewal this year our agreed values went up or stayed the same over the fleet and the premium came down so that was a nice surprise. 
    • MBS206
      Import insurance in 2025

      By MBS206 · Posted

      I don't even go that hard core. I just say "how do you expect me to stay, when you increase my premium, and reduce the value of the car?"   Then play a game of shut the f**k up. Most of the time it's a computer that did the adjustment, and the people will happily change it around for you.
×
×
  • Create New...