Power...car At The Tuners :)

[Cubes]

Found some pics of mine when I did it all the way back on the 4th April 2004.

pics being attached now.

[R33GOD]

i used a fan screw from one of the pc's at work lol. worked a treat, then i used a mates vice. i didnt squash it too much, but the spring tension is definately tighter now. lets see how we go tomorow on the dyno again

[RBwhatever]

did you take a pic?

[R33GOD]

nah not yet

[R33GOD]

Found some pics of mine when I did it all the way back on the 4th April 2004.

pics being attached now.

how did you go with it all cubes? holds boost well?

[R33GOD]

and how did everyone else go with this mod?

[joeyjoejoejuniorshabadoo]

i blocked off the hole about 3 months ago... happy with it

[gun32gtr]

256.9rwkw thats my guess but seen as tho i didnt read all the post u may have had tuned already...

Edited October 3, 2007 by gun32gtr

[R33GOD]

well im gettin a retune tomorow on a higher boost than 14 so take another guess lol

[RBwhatever]

You don't want to crush just a little bit more? Just to make sure?

[R33GOD]

nah should be fine. dont want to over do it, worst case scenario i buy a proper plumback bov

[R33GOD]

cant believe it actually worked. took it out for a drive and held boost 3/4 throttle in 4th. help 16 psi

[RBwhatever]

congratulations

Edited October 3, 2007 by KeyMaker

[R33GOD]

well just as i thought. went to get the car retuned today and loosing pressure again!!!

the plenum gasket totally stuffed. soon as i hit 16 psi theres a loud / medium pitched hiss and drops back to about 13.9 psi. that sound right people?

ive started to get it sorted but im stuck. how to i get the bolts out from under the plenum?

Edited October 4, 2007 by R33GOD

[RBwhatever]

Did you get your car sorted?

[R33GOD]

i changed the plenum gasket. it stopped the major leak. i dont know what the heck is goin on but i cannot hold boost above 14psi!!!!!!!!!!!

i took it to g-tech today and done a boost leak test and there was absolutely no leaks.

my actuator is a hks one so i dont know why it wouldnt hold boost.

could it be my gizzmo electronic boost controller?

this has got me really pi$$ed off!

opinions please!!

[ZENNON]

tis farked - sell it and buy a hcr32

[R33GOD]

tis farked - sell it and buy a hcr32

i would but im not a fan lol

nah seriously its doing my head in

[mass_iv]

thats really annoying... what are u plugs gapped to? u shud have them on at least 0.8 maybe 0.65

other then that id look at the boost controller

[R33GOD]

its definately not the plugs. they were changed and regapped last week to .75.