Jump to content
SAU Community

Recommended Posts

hi, i might be needing to replace my coil packs and would like to get a set that will perform and last... iv noticed that there are the JJR coil packs (which are nicely priced under $400) that iv read and claim to perform as well as splitfire coil packs which people have used for a long time ($500), will the OEM coil packs perform as well as these other two?

would like your feedback or any info on these coil packs or any prefered or recommended brands...

cheers

4drftn

I recently needed new coilpacks for my car...contemplated getting splitfires but went with the JJR ones instead as they were slightly cheaper...i can't compare them to splitfires as i've never used them but the JJR ones do work ok...they would have to i guess as they are newer than the standard 15-17 year old ones i had...not sure how long they'll last though...for now...its all good...one annoying thing with the JJR ones though is that Just Jap has stuck an annoying brand and details sticker on each of them which is a bit of a pain to remove...regardless...if anyone has any concrete results for the JJR coilpacks it would be nice to see...cheers...

Edited by limpus

+1 for this, i'm just curious to find out if the jjr's are good for relatively high powered applications i.e. 400kw'ish

i am interested in buying some but would like to see how they perform first... don't know if adequate spark delivery is much of an issue on rb's once u get high power figures

I ran my old factory RB25 coils to 369rwkw. So stock coils (in good condition) are fine, and many cars have made bigger power than me.

I recently just installed RB26 Splitfires for my RB26 setup, only reason is OEM coils are $$$.

JJR ones havent been around anywhere near as long as Splitfires (and other coils like FET), so IMO at this stage its hard to tell on durability under extended periods/conditions.

Its something that i would take into account when looking for parts as cars with Splitfires have been running for a number of years, JJR ones, lucky if its a few months i think they've been around for?

And no, im not in any way saying the JJR product is garbage.

Unless someone knows what re-branded item the JJR ones stem from? Which would provide more info

Or are they made by JJR themselves? :)

I ran my old factory RB25 coils to 369rwkw. So stock coils (in good condition) are fine, and many cars have made bigger power than me.

I recently just installed RB26 Splitfires for my RB26 setup, only reason is OEM coils are $$$.

JJR ones havent been around anywhere near as long as Splitfires (and other coils like FET), so IMO at this stage its hard to tell on durability under extended periods/conditions.

Its something that i would take into account when looking for parts as cars with Splitfires have been running for a number of years, JJR ones, lucky if its a few months i think they've been around for?

And no, im not in any way saying the JJR product is garbage.

Unless someone knows what re-branded item the JJR ones stem from? Which would provide more info

Or are they made by JJR themselves? :)

Completely agreed. For the extra $100 or so dollars ($510 from Slide or nengun), splitfires have been tried by thousands and you know they can make the power and last. The JJR ones may be just as good or even better, however until they have been tested, i know what i would go for.

any new coils, be they jjr or splitfires, are going to be better than old ones that are arcing out.

the jjr ones are probably ones that they have had made copying splitfires. unless you are chasing big horsepower i'd say they would be fine. if you are only running 250kw or below they would be more than ample if your stock ones aren't up to the job.

yeah, chinese stuff isn't that bad these days (depending). in the bike industry a very large portion of stuff comes from china, most of it good. it is actually the companies that specify what they want the determine whether it is good or not. if they want it to be cheap it will be crap, but if they are willing to pay a bit more they will get good stuff. it is just that there are a lot of people that are getting the cheapest made stuff they can in order to make maximum profit. which means a lot of people buy stuff, and it breaks, which then makes people think that all chinese made stuff is crap. but now china is starting to get expensive so people are going to india and indonesia and vietnam to get things made. taiwan used to be the cheap crap stuff but now it is where better stuff is made.

... in the bike industry a very large portion of stuff comes from china, most of it good.

Don't agree with this statement. All the stuff I've seen from China has been lower quality than the Japanese made stuff. 1/2 the price for sure. And China may make thousands of motorbikes but not that many make it into Australia.

Aftermarket gear they close the gap somewhat, but I won't in general buy china made electronics or important components.

I've got set of jjr coils in my car running 16psi

My std coils used to misfire a little bit with a 0.65mm gap

Opened the gap back to 0.8 with the new ones and no more misfire

Picked up a little off boost power too, from the seat of the pants dyno :worship:

And with a 1 year warranty they're not bad for the price

Very hard to tell just where parts are made these days!!!

Just cos' it has Nike written all over it----------doesn't mean a thing.

You can get parts from USA, Phillipines, Taiwan, China, Korea, Japan Thailand and it could have HKS, Blitz, Chev, Holden, Nissan, Toyota, NEC, LG..........you name it on the label. The parent company controls the quality [or attempts to], but that doesn't mean that other manufacturers can't do the same.

This thread will be a good read. Im thinking of going with these JJR coils when I go back to coil on plug. unless I just replace the commodore coils with MSD ones......seriously thinking of going the JJR option though.

had one of the guys who drops into the workshop use the JJR's and claim that he could run plugs gapped at 1.1 on em like they were 0.8's... that's something standard's can't do, and mean that they do pack a bit of a wallop. they're starting to sound like a real good alternative/performance upgrade.

i guess we might have to wait for a magazine to do a test or something to really know how they perform against each other, as said above some people are a bit iffy when it comes to chinese products but also as said above some of the chinese performance parts are proven to be a good option being a direct replacement of performance upgrade...

does anyone know what the OEM coil packs are priced at???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
    • So my car is finally back from paint! This took an absolutely insane amount of work and should get it's own build thread - but I didn't build it. It was completed by Troy @ https://scalekustoms.com.au/ I originally bought the AOSHIMA URAS Type R kit while I was in Japan, it's supposed to look like this when assembled: Now, I thought that was cool enough until I opened the box with Dismay, as there's no way I could possibly have completed it. The thing is 1/24 and has details down to the steering wheel horn button, which is a 2mm diameter sticker. I originally wondered if someone could make it at all, as is - But then things got a little carried away. It's worth noting that the model does not have an openable bonne, let alone engine bay, OR an openable boot. - Troy has worked wonders with 3D printer and presumably better eyes than I will ever have. My photos suck, so I will post up some of his in-progress ones he sent to me during the way. Unsuprisingly, he is very detailed. A lot of these are out of order. But he: 1) Made a LS engine and an engine bay appear out of thin air 2) Made the bonnet removable 3) Printed the rims I will buy in the future (or any rim you want) 4) Printed and added the wing that is going on 5) Tinted my back windows as this is what my car has IRL (privacy glass) 6) Added a licence plate. 7) Somehow did the interior 8) 3D Printed my actual seats 9) Made the exhaust under the car connect even though this is likely invisible. 10) Created a boot with my fking battery box, power steering reservoir, subwoofer and toolboxes back there. To say it's insane is an understatement. And I f**ked it all up because when I was re-mounting the wing (it broke in transit) I spilled glue everywhere and ripped paint up and Gregged the rear half of the car. Which about makes sense. Also, this arrived on the same day. Quite the change from: I spent 16 hours per day over the next 3 days pre-christmas putting the interior back together, mounting lip, fixing various bodykit problems with window mouldings, etc. and servicing, rebuilding my 370z brakes to go on the car 'soon', messing with heights to check clearances for new wheels, etc. I also had a foray into mounting wiper-mounted washer jets which was an absolute disaster. The bodyshop has welded (and painted) over the stock jet locations for reasons unknown to everybody (i.e they forgot) I also wanted to wire in the oil pressure sensor on Christmas Eve which was a BAD IDEA. You do not know terror like pulling your ECU apart, pinning in half-fitting pins that aren't the right ones, but trying anyway because it's Christmas eve, putting your ECU back together and having a no-start condition with a fuel pump not priming. Then you undo all your work and the fuel pump still doesn't prime. So after all that terror and horror and pain and tedious disassembly, the issue was the relay in the boot which seems to have died/stuck when I was turning the car off and on about 700 times testing shitty washer jets. I also re-wired the fuel pump power plug which fell apart in my hands. I am very happy I had 3 extra pre-made ones from a few posts/last Christmas's breakdown. https://bluewireautomotive.com/products/10-x-pcm-ecm-ecu-terminals I have put an order for these in, so I can actually add the pins to the ECU properly. The commodore ECU does not have the pins for Oil Pressure via ODB2. However the ECU can support it if you create the pins and wire them in. So for round two, and somehow attempting to route that into the engine bay through my impossible engine bay grommet is a fight for another day. It's 40C in Melbourne tomorrow, I am half tempted to drive the car with the aircon on to deliver presents to my partner's family and see if it helps with the overheating-on-40C-days-in-traffic-with-aircon-on-only issue that the vents were intended to solve. Do I feel lucky?
    • Yes, while being... strictly unnecessary. Tuning is a bit like quantum physics. You don't need to understand what Schroedinger's equation actually means. You just need to run the computation and accept the answers. With tuning, you just push page up/down until the exhaust tells you that you've got the fuel right. The VE can stay hidden behind the curtain like the Wizard of Oz and you'll never need to know what he looked like.
    • The second part yes, the first part about easy VE calculation is something I've seen a few people talk about online.
    • You 100% could do that, would save money on a gym membership lol. But yeah, getting a cordless orbital sander will feel priceless coming from doing it manually.  Good luck with it mate
×
×
  • Create New...