Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
Does anyone know the energy output of each of the competing coil packs?

Im trying to weigh up a set of LS2 coils to standard direct replacement options

i was touching on this subject in this thread i tried to start, but it looks like no one else measures outputs.. they only care whether they leak or not. at low rpm i was getting a peak output of around 28kV with good old oem coils that didnt leak

http://www.skylinesaustralia.com/forums/Co...ge-t333110.html

there is a trader on nissansivia.com selling nissan OEM coilpacks for $105 a piece

for a stock or even mildly modified application, i'd happily pay for a set of OEM coilpacks over splitfires or yellow jackets

WHich trader?

as in 105 x 6 = $630?

what are splitfires worth these days? i bought mine years ago

I bought my splitfires 3 years ago (dreaded R34 GT/GTt dying coils at 100,000km).

I've done 37,000km on the splitfires and going strong. What's the typical life of coilpacks?

Man i burn everytime i drive my car and try to give it a little gas.

I had the missifre problem about 1.5 yrs ago and went with the splitfires from CRD (less than 10,000k's so far), along with new spark plugs at the time and it fixed it.

But now the problem has come back and progressed to the point i cant even take off without heavy missifire let alone dial in some boost at higher rpm.

Has anyone else had such bad performance from a splitfire set?

Im gonna change the plugs again(they were iridium not coppers so should last alot longer than 6thousand k's though!)

Im gonna change the plugs again(they were iridium not coppers so should last alot longer than 6thousand k's though!)

Common myth. It's true in normal cars but HEAPS of people on here agree that they don't last much longer, but everyone's experience varies.

The usual solution is changing plugs every 5000km and using coppers...

I used to be a fan of Iridiums...bleh to that I say. They are good plugs, but unnecessary, and in our engines don't last anywhere near what they claim.

Well after swapping out the iridiums last night to the coppers performance is back up to par.

funny how after 10k's when theyre "supposed" to last like 60k, the tips of 3 of them had somehow dissolved leaving a gap of like 20

so its a +1 for the splitfires from me after all...

They probably do last that long...

NGK and co don't say anything about the performance of the plugs once they are there though...

This performance difference is always going to be more noticeable in a high revving performance vehicle, hence Iridiums are better suited to passenger vehicles as far as the long service intervals go.

Man i burn everytime i drive my car and try to give it a little gas.

I had the missifre problem about 1.5 yrs ago and went with the splitfires from CRD (less than 10,000k's so far), along with new spark plugs at the time and it fixed it.

But now the problem has come back and progressed to the point i cant even take off without heavy missifire let alone dial in some boost at higher rpm.

Has anyone else had such bad performance from a splitfire set?

Im gonna change the plugs again(they were iridium not coppers so should last alot longer than 6thousand k's though!)

Could be ignition module. I did the same as you, changed coil packs, changed spark plugs and changed coil pack loom. Each time it seemingly got better but would always come back. Turned out to be dud ignition module. Everyone seems to think that sticking splitfires in is a magical cure all for misfires. It's a load of garbage.

If you can afford it, get some new OEM coil packs. Otherwise JJR ones are fine. Splitfires are over rated. The people frothing about how splitfires are so great are just trying to justify wasting an extra $100 or so.

Nissan quoted me over $190 per coilpack, got 6 yellow jackets for $420.

Could be ignition module. I did the same as you, changed coil packs, changed spark plugs and changed coil pack loom. Each time it seemingly got better but would always come back. Turned out to be dud ignition module. Everyone seems to think that sticking splitfires in is a magical cure all for misfires. It's a load of garbage.

Coilpacks fading is a common problem on skylines though, it's not the source of every single misfire but it has solved the problem for a lot of people.

Nissan quoted me over $190 per coilpack, got 6 yellow jackets for $420.

Coilpacks fading is a common problem on skylines though, it's not the source of every single misfire but it has solved the problem for a lot of people.

Yeah but the poster has replaced his coilpacks not too long ago. I would definately be looking at other options rather than replacing them again. Wouldn't hurt to try a friends known good ignition module and see if it helps. Same for coilpacks, best to identify the problem before throwing money at it.

Yeah but the poster has replaced his coilpacks not too long ago. I would definately be looking at other options rather than replacing them again. Wouldn't hurt to try a friends known good ignition module and see if it helps. Same for coilpacks, best to identify the problem before throwing money at it.

Ahh ok, I see. I'd be doing ^^, the coilpack loom often goes too, but I'd be pretty keen on finding the problem before spending more

  • 1 month later...

Looks like the JJR ones not available anymore.

Ordered some Yellow Jackets, at almost 1/2 the price of splitfires + double the warranty was a no brainer really.

Will post up results once I get them in, hopefully fix my misfire (with new plugs)

  • 2 months later...

Common myth. It's true in normal cars but HEAPS of people on here agree that they don't last much longer, but everyone's experience varies.

The usual solution is changing plugs every 5000km and using coppers...

How much power (hence how modified) are those cars making?

I have a fairly stock car (with the basic bolt ons running 10psi) & the last time the plugs were changed was back in 09, when I got it dyno tuned (have covered about 20,000km since then).

Still no issues with misfiring or jerkyness (with those 2 year old plugs) when I put my foot down & it revs over 6k... & what ever coils are in there had no dramas neither (never changed since I owned the car 3 years ago).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
  • Create New...