Jump to content
SAU Community

Recommended Posts

shes all stock

its loudest on idle i think

i think the best was to describe it would be a buzzing sound

one of my mates reckons that it might be the zorst flange

Edited by PyroIndustries
I think that maybe my turbo is on its last legs

i have notice a kinda ticking sound coming from my turbo

could it be something else or am i on trouble?

Hey Dave

Pop over and I'll have a quick look for you....

Sounds like a gasket :D

  • 1 month later...

When replacing the manifold/turbo gaskets, replace all the studs aswell.

Your mad not too, and your likely to break 3-4 when removing the manifold anyhow.

So replace them all now and be done with it

when my turbo went, it sounded like a supercharger, annoying wine sound drove me crazy, then i just boosted it real hard and back off soon as i backed off it went to the point of sound like metal was scrapping on metal not a good sound, i still had boost pressure though, if you think its going take off you intake pipe to turbo and feel the shaft and spin it and see if it makes noise then if not then its normally fine, but in your case, defently gasket,

JV

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It didn't save me any money! All it did was leave me with 3x 5L Engine oil bottles that have about 1-1.5L left in them 🤣
    • Have you tried one of those wash mitts @PranK? I find it works so much better than brushes on a stick for cleaning wheels. If fingers fit between the spokes, then can easily clean them with a mitt. I like Bowden's Own and use their Love Glove, as gay as it sounds. https://www.bowdensown.com.au/products/microfiber-range/love-glove That applicator looks super handy! Earmarked for next time I'm splurging on cleaning supplies.
    • A car always goes harder if it isn't yours ( e.g. rental, mum n dads, your mates daily when your deso)
    • Hey, guys, I’m hoping I can find answer here. I have already done some searching and asking around but still nothing.    I fitted an IC7 dash in my R32 GTR, and I got everything displaying on the dash except my high beams. I get input voltage and the high beams displaying in the dash when I pull the lever, but not when I fully engage the high beams. I spliced into the Red/Blue Beam+ wire in the black center connector from the cluster, but there is also a black Beam wire I think I need to use as well. The high beams still work. It’s just a matter of getting it to display on the dash.    Has anyone fully wired in their IC7 properly ? I would appreciate any guidance on this.    IMG_8835.mov    
    • I buy my wheel cleaner in 4 litre bottles now. Euro brakes are brutal
×
×
  • Create New...