Jump to content
SAU Community

Recommended Posts

Guys i have a question for you people. I got a job as a mechanic apprentice and i start tomorrow. My dad is pushing me not to do it and get into something else because of the money and future. When do you think motor cars will be phased out and replaced with electric cars? What will happen to motor mechanics then.... Give me your honest opinion before i screw my life over and get into an industry that wont last!!!

Link to comment
https://www.sau.com.au/forums/topic/187362-cars-running-on-power/
Share on other sites

i wouldnt be too worried about the cars being phased out, they will still be around for more than the next 40 years (your working life) although i love cars i didnt go into that industry because the money isnt so good, its pretty dirty work (not a real big issue) and theres so many of them around, which makes it harder to find work, and will keep the pay rates low IMO.

i personally am doing my boilermaker apprenticeship atm, because i dont mind fabrication and its something i wanted to learn, if i was to do anything else, probly plumbing (good conditions, pay etc).

the other thing is, all my mates that have become mechanics, they've all lost the passion and cbf workin on they're own cars, and as a guy that i work with told me 'working on cars is my hobby, i'll do it when/how i want to' and it makes sense to me. obviously you wont be pro right away, but i've found theres always plenty of people out there to help/show you things, and i've learned alot of things this way

that said your starting tomorow so do it and see what you think of it, if you like it, stay with it. just find something you enjoy and the money will come

Well i did my plumbing pre-apprenticeship at the start of the year, but i had 2 operations on my right knee late last year. It hasn't healed properly and i don't know if it ever will, and i cant fully bend down because it feels like it's about to f**king explode. I thought go do another trade, but didn't know what because Air Con's/Sparkies/Plumbers/Carpenters are constantly on their knee's. Mechanics/Panel beaters aren't, but the money's f**ked!

After 20 minutes of depressing thoughts, i think i will just go into the workshop tomorrow, and embarrass myself by telling the boss i'm backing out for certain reasons. Next step: working out my knee overtime and starting plumbing by the end of the year. f**kin digging my ass off, and f**king my knee harder for my first year... how exciting!

dw mate. their is a thing called economic engineering. basically all cars "in general" are designed to last 20 years. As for electric cars, the process of making the Li batt on a large scale is still expensive to be widely used in automotive industry. its still too heavy and inefficient.

my advice is focus on the electrical side of things to the automotive industry as everything is becoming automated.

The only downfall I can think of is the fact that the authorities are so strict now on modified Sports cars... so if you're a mechanic in general I wouldn't worry; but if you are in modification of sports cars... there may be a downfall here.

Cheers,

My dad is pushing me not to do it and get into something else because of the money and future. When do you think motor cars will be phased out and replaced with electric cars?

Is your dad a tree hugging hippy with a severe reality disconnect?

The state of electric cars right now is shit. Most of them have a really shit range, and because electric motors lack the power / energy storage capacity they have to be made light. Which, for a budget car, means flimsy.

The only production pure electric car out there I'm aware of is the G-Wiz, and when their crash test results look like this:

advgwiz.gif

There was an interview in last season's Top Gear with Kirsten Scott Thomas, who owns a G-Wiz, and she said that the electrical system in the car's so pissweak that you can't use the wipers and headlights at the same time. With that kind of "safety", I don't think internal combustion is going to be in any danger in the near future.

If you have a look at the future of automotive energy sources, you'll see that only a few people are trying to go pure electric. Most are either looking at biofuels, or hydrogen. Both are still internal combustion, the only difference is the fuel used. The basic principles are still the same. In this day and age, you can't expect that you only need to learn 3 years' worth of knowledge and expect it to last you to retirement.

u can still work as a mechanic and not have a licence. my mate is a mechanic and he lost his licence for 3 months.

as for the money, it isn't that bad. it just depends on where you work. my mate was only getting paid for hours booked (not a set amount of hours per week) and he was making about $1000 a week. there are a lot of jobs with less pay than that, retail for example. full adults wage of just over $500 a week for 38 hours.

what about an auto electrician?

They get paid about the same as mechanics, in some cases more

Do an apprenticeship

basically start off with the small stuff, installing alarms, stereos, speakers etc

Then you move onto wiring up engine looms, powerFCs etc

Then you get to go into tuning them eventually :rolleyes:

I reckon do that, that'll keep your dad quiet about the "electric cars" thing, because you'll be positioned to move straight onto those :( if that ever becomes common place over the next 20-30 years, which somehow i doubt at the moment, but I could be proven wrong

what about an auto electrician?

They get paid about the same as mechanics, in some cases more

Do an apprenticeship

basically start off with the small stuff, installing alarms, stereos, speakers etc

Then you move onto wiring up engine looms, powerFCs etc

Then you get to go into tuning them eventually :rolleyes:

I reckon do that, that'll keep your dad quiet about the "electric cars" thing, because you'll be positioned to move straight onto those :( if that ever becomes common place over the next 20-30 years, which somehow i doubt at the moment, but I could be proven wrong

^^ +11ty

most sensible post yet IMO.

DEFINATELY go with the sparky side of things. Its less dirty, alot more technically challenging and the sparking side of things is becoming more and more a "black arts" area which means more specialization and higher charge rates.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, just wanted to let you know about an app I use to track the modifications, repairs, servicing etc I do to my R33 GTR. You might like to use it as well. I'm biased because my son just wrote and released it! But I think you might find it useful to... https://trackmymods.com  
    • Hey everyone, been on here for a while, but never introduced myself before. 1st import was a R32 GTS Type M, then R33 GTS, now R33 GTR - each one sold to help pay for the next one. Over the years my son has seen me modify and do changes to my imports and was one of the reasons for him to build an app for car enthusiasts like us. (He can only afford a 2007 Honda at the moment, but he'll get there!) Anyway, bit of a proud Dad moment as he's released an app that I use and you all might like to as well. https://trackmymods.com  
    • It will sound tragic and you wished you didn't have 1x exhaust per turbo. There's a reason why most S55 owners change to a single mid pipe.
    • Echo the comments about the well preserved condition it's in. It has the aero bumper too for extra points. Nice car, and please keep it like that! 🙂
    • 1. There are no real performance benefits. It sounds different, and as the pipes are not as large diameter you can claw back some undercar clearance or run lower (if that's your thing). 2. Twin pipes, offering exactly the same cross sectional area as a single pipe** will have higher pressure drop - so will not flow as well. That's because there is more surface area of wall per cross sectional pipe area, hence more frictional losses. ** But of course, it is almost impossible to get 2 pipes that are exactly the same XS area as a given typical single pipe. eg, 2x2" is not the same as 1x 3", although it is close. If the 2x pipes add up to less XS area than the single - it will just be flat out worse. If the 2x pipes add up to a bit more than the single, then it might come out as a wash. If the 2x pipes are substantially more XS area than the single, then it will probably flow a little better. 3. No. Why would there be? What have cats got to do with boost creep?*** ***But for f**ks' sake, please run a cat. 4. If you want.
×
×
  • Create New...