Jump to content
SAU Community

Bulk order of Neons!

sskylinee

By sskylinee,
in South Australia

 Share

Recommended Posts

madman Explorer

madman

Posted
Posted

The full undercar kit are sold at $239rrp, but apparantly they don't do them anymore as a kit (wooden box), so the only colour left is pink and it's for $170.

They however do the 36" and 46" individually.

36" undercar neon is $169rrp this order $119 (a pair)

46" overall length under neon is $149rrp this order $104 (a pair)

I reckon if both of them are bought we should get a better discount..... maybe another $10 off ?!

300mm U/V Neon $29rrp this order $23

200mm neon rods $14.95rrp this order $12

590mm neon rods $39.95rrp this order $30

There's heaps more.... strobes, music sensitives neons, etc.... I can pretty much get anything... just email me the colour and length and go from there...

The more order the better, that way we all can save and less freight.

Please do email me to confirm if you do want any. Thanks.

Anthony.

[email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      I figured out what’s wrong. It’s something to do with the high beam wire short circuiting. When I measure the continuity with a multimeter on the headlight socket connector it gives me a continuous beeping noise when I put it on the ground socket and also on the high beam socket.  On the passenger side of the car (working side), it’s only beeping when the probe is on the ground socket. Which makes sense.  So that means it has something to do with the high beam power supply for the drivers side. How do I trace that? Is it the turn signal lever malfunctioning? The one that also controls the high beam and low beams. 
    • Bncr33nokout
      Hey lads just a fellow gtr owner

      By Bncr33nokout · Posted

      Hey lads just finished tidying up a gtr a bought. Originally from Sydney now living in New Zealand 
    • slamaa
      R33 GTR/GTS25T Rear Trunk Finisher Panel, 2-Door Models

      By slamaa · Posted

      Hi Guys, Looking for this piece if anyone can help out.   https://tfaspeed.com/products/nissan-skyline-r33-gtr-rear-trunk-finsher-panel
    • Thatjuan
      Nissan Gloria Hy34 issues

      By Thatjuan · Posted

      How did you go with your problem? End up fixing it. Have a y34 aswell vq30det
    • EndZee
      Weird compression after rebuild

      By EndZee · Posted

      But if I smoke test 5th cylinder it’s all ok, no leaks  when I try with 2nd it’s leaking exhaust and intake, it doesn’t come from oil dip stick.    so maybe when car was running poorly, rich or sth. Spark plugs were black and covered in charcoal or sth lookalike. could potential contamination make valves not seal properly? is there also a possibility that rb’s don’t have equal performing cooling passages  meaning back of the engine will be hotter than front. Can this cause improper wear if engine was running under load for short time? Or carbon build up could just burnt from 4-6 and is still on 1-3?   I out of my head like really. Timing is as manual crank-exhaust 47, exhaust-intake 38 at this point I thinking about give it a try and make another 500-1000km and check if anything change, if not I will most likely disassemble engine head /or whole engine and send it back to rebuild. It’s killing me     
×
×
  • Create New...