Jump to content
SAU Community

Recommended Posts

OK GUYS.. $20 to anyone who finds me a decent S13/180sx or S14 to put my RB25neo in..

must be manual.

must be able to register in my name.. asap.. as in RWC and paperwork..

must have clean chassis.

im looking for stuff like this.

180sx CARSALES

of course cheaper the better.. ill also throw in some free parts too if its a good base car...

if i look at it give it the nod and buy it $20 is all urs.. :blink: that and some parts i have lying around here :blink:

THANKS

Link to comment
https://www.sau.com.au/forums/topic/187516-wtb-20-is-urs-if-u/
Share on other sites

If you were just looking for a drifter this would be perfect but alas it can't be registered. I will keep on the lookout. If you need some sideskirts I got a pair here never fitted for a 180sx :rolleyes:

http://ucn.dealernet.com.au/detail.php?ses...p;ucnid=2529908

Also found this for you mark if you can bring one up from Sydney

http://www.nissansilvia.com/forums/index.p...howtopic=259064

Edited by Triptych
  Triptych said:
If you were just looking for a drifter this would be perfect but alas it can't be registered. I will keep on the lookout. If you need some sideskirts I got a pair here never fitted for a 180sx :)

http://ucn.dealernet.com.au/detail.php?ses...p;ucnid=2529908

Also found this for you mark if you can bring one up from Sydney

http://www.nissansilvia.com/forums/index.p...howtopic=259064

thanks adam.. i knw ironchef from before.. im watching him build up his importing empire.. and i would personally use him or jspec for importing..

how the A/C go.. im glad my 180 has A/C aye. summer is gay here in QLD.

  R334door said:
whats your max you want to spend mark?

hiya chris how u doin

to be honest im hopping to spend 5k on a decent bodied car. but will pay more if have to.

thanks so far guys..

  silverbulletR33 said:
lol ^^
  AZN25T said:
I dunno what's so funny about 5k for a car that doesn't necessarily have an engine. I would think an 180 minus engine would go for around that.

its fine... his name is dale.. and that is as bogan as a name can get.. ahhaa..

but this is a serious thread.. dont post unless u have some useful info. or ill get a nazi mod on ya...

Edited by markimak

just curious, why does it need to be manual if your changinfg the motor and box over anyway?

also i have an S13 that requires only a few parts to be rwc(i would fix before sale), and a paintjob. CA18, NA, Automagic. thinkin 3k?

  V8skylineMAN said:
just curious, why does it need to be manual if your changinfg the motor and box over anyway?

also i have an S13 that requires only a few parts to be rwc(i would fix before sale), and a paintjob. CA18, NA, Automagic. thinkin 3k?

hmm interesting mate.

send me pics to my email/msn

filomarkimak@yahoo.com.au

  markimak said:
u live in WA.. u need the money foo.

anyone else..?

its a spotters fee..

I was laughing at this comment. As I saw humor in it cause i used to live in perth ..

and i just was too lazy to hit the quote button...

I found your bogan comment to be quite amuzing though..

  silverbulletR33 said:
I was laughing at this comment. As I saw humor in it cause i used to live in perth ..

and i just was too lazy to hit the quote button...

I found your bogan comment to be quite amuzing though..

haha glad u didnt take it to heart bro.

yeah thought u wer slinging shit.. sorry..

far out i want that 180sx already...

i plan on matt blacking it cause its gonna get alot of dori damage..

  ztuned said:
i don't get it? is it a white people thing?

STOP SPAMMING MY THREAD.. :)

and no.. i aint white.. im chocolate ask josh... i would post a pic but im afraid some random WA peodphile will jizz his finest over a carbon copy of my tnaned lines. :P

back on topic.

i have the option of forking around5-6k to kristian at iron chefs and he will source me a suspension diff braced equiped exo drifter from the land of the rising sun.

I currently have my 180 for sale, it is currently an RB20DET, Manual, has JIC coilovers, 5 stud conversion (S14 Fronts, R32 R200 Rear end), HKS Front Pipe, Cat replacement pipe, 3" RSR cat back system.

post-1172-1191546619_thumb.jpg | post-1172-1191546611_thumb.jpg

I am after $8000 without type X taillights & with stock R33 GTS25-t wheels.

  sullivan_a said:
I currently have my 180 for sale, it is currently an RB20DET, Manual, has JIC coilovers, 5 stud conversion (S14 Fronts, R32 R200 Rear end), HKS Front Pipe, Cat replacement pipe, 3" RSR cat back system.

post-258-1190076553.jpg | post-258-1190076563.jpg

I am after $8000 without type X taillights & with stock R33 GTS25-t wheels.

pics no work mate.. where abouts are u located.?



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...