Jump to content
SAU Community

Recommended Posts

Hi guys,

Just wondering if you guys knew what is wrong with my car.

I just got the VG30 Highflow installed in the weekend. It was all fine until the next day when I put more coolant in to top it off.

Mind you that I went for a long drive that day. Just cruising, no hard driving.

Problems started when I filled the car with more coolant and I accidentally tipped some around the bottle.

After that, the car starts funny. Usually first try, the car starts then bang stalls.

Then 2nd try, the car is hunting on idle going up and down between 0 - 1000rpm.

Any ideas? Is there any electrical wires that I should not have wet with the coolant?

Any help would be great.

Cheers,

Bernard

Are all your fuses ok? u sure u werent tinkering with anything else? is everything connected back up properly in the engine bay? having a new turbo put in, may not have connected the afm plug properly or something simple like that. And what does the black smoke have to do with it? is it a lot of black smoke, and coming from the exhaust im assuming.

doesn't black smoke means its running rich,can u smell fuel, if there fuel coming out the exhaust (very fine spray) ?my mate did a turbo upgrade on a sr20det and it was smoking till it got tuned. don't know if that helps at all.

good luck

AiF

Black smoke from the exhaust is overfueling. If its doing it at idle then you probably have a vacuum leak or afm not hooked up at all (or not properly since you drove it for a whole day, might have fallen off / come loose). Also when you spilled the coolant, are there any fuse boxes below your coolant reservoir bottle? If so open then and make sure its all dry and no fuses are blown.

Do you have an aftermarket ecu that you re-tuned with your high flowed turbos? Got a mate whos HR31 ran rich as hell after installing an RB25 turbo onto his RB20 running a power fc but hasnt been re-tuned yet and constantly fouls and kills his spark plugs.

Hope that helps until the gurus get here.

Cheers!

Gagz

Edited by R31 Gagz

Thanks for all the replies.

Well this problem is only at startup where it seems to be coughing up.

But when it gets back to normal in a few minutes the black smoke goes away.

What does this mean?

Ecu has been remapped for the Highflow turbo.

Runs really good after a few minutes after startup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...