Jump to content
SAU Community

Recommended Posts

got my car back today (r32 gtst with rb25det neo) and as you accelarate in low revs it stutters a bit...almost like its gasping for fuel and then as you give it a bit more on the gas it corrects itself after about 3500revs and revs smooth all the way to the top of the rev range. No its not a miss fire as ive had a miss b4 and this is different. car is pretty highly modded. just got splitfires, and have had gtr pump, 630cc injectors and microtech for ages. Car just had a full tune + remap and it was done by one of the best tuners in aus. not sure whats going on? can anyone shed some light before I call him in the morning?

thanks

Luke

Link to comment
https://www.sau.com.au/forums/topic/188002-car-is-stuttering-on-low-revs-wtf/
Share on other sites

grab some CO contact cleaner from repco, clean the airflow meter wire. only do it if the car hasnt been run in atleast 12hrs

check for boost leaks.

fixed a mates 32 that way.

obviously no responsibility is taken if you damage the AFM or car in anyway.

-Ryan

Whats been done to it between tuning and getting it back?

because a light load misfire is pretty bloody obvious and your tuner should have mentioned something.

He must have done some light load tuning, and because the ecu is map based a vacuum leak doesn't really affect it if it was tuned with it.

so, it's either a vacuum leak thats happened after the tune, a sticky injector maybe, or the tune is up to shit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...