Jump to content
SAU Community

32 Is Dead Again

Daniel R32

By Daniel R32,
in Western Australia

 Share

Recommended Posts

Daniel R32 Experienced

Daniel R32

Posted
  • Author
Posted

The original plan was to drive this around with just bolting on a turbo for as little as i could spend which nearly happened for under 2k, till i couldnt find a turbo ecu (no one wanted to seperate it from the half cut)

The idea was to drive that around and get used to a turbo car while i built a 26/30 combo with the best parts in it, which was going to take a while but my motor gave way before i could even start (oh i got the 30 bottom end that was it) so i fixed this motor and thought cool i can start building my 'big' motor now, then a few days later (yesterday) it gave way again, and i dont wanna get another motor or really fix this one again and then put the 'big' motor in

Its a hard choice on what to do but i might have a better idea once the guys that built the bottom end have a look at it, which will hopefully be this week. . . .

Daniel R32 Experienced

Daniel R32

Posted
  • Author
Posted
probably would have been a better idea to just stick in the big motor and drive around on low boost... an rb26, stock isnt that powerful

Yeah it is but i wanted to do the 26/30 but my motor gave way before i could start building it. I was gonna build the 26/30 over bout a 1 to 1 1/2 years but since my motor blew i had to fix it as i had nothing else to put in

If that makes sense?

Daniel R32 Experienced

Daniel R32

Posted
  • Author
Posted

Ok found what it might be.

The 2 breather hoses on the rocker covers were conected to the intake pipe just before the throttle body which when it built up boost was putting it straight into the rocker covers.

We had the guy that built the bottom end come round and have a look and as soon as he said that we could see the problem.

I feel like an idiot now for missing something so simple but it was good to have a 'fresh' set of eyes to check it out, i was looking too hard for something more complicated.

It still smokes but nowhere near as bad as before, ill give it a few runs this week to see if it improves

Cheers for the help and sugestions guys

Daniel R32 Experienced

Daniel R32

Posted
  • Author
Posted
good to hear , you have it sorted.

when running it in, one good way is to not run any boost at all for first 500 kays or so( many different theories but thats how we do it)

cheers russ

Its been very hard not letting boost come on. . . it starts coming on at about 2500rpm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Duncan
      NC MX5

      By Duncan · Posted

      Quite right, if you make it to that pension you deserve every cent
    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...