Jump to content
SAU Community

Sau Vs Wrx Nulon Drag Day @ Heathcote, Rd 2 - Wrap Up And Results


Recommended Posts

We had a great day, Kevs GTR ended up running a 10.53 @ 139.75, the R33 4 door isnt a bad car either, it ended up going 11.5 @ 133.68 on M/T street radials, both cars suffered major traction issues. We had fun wich is the main thing!!

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hey Ben. Just wondering how much power the GTR is pumping out at the wheels?

Cheers

Pete

Hey Pete

Mine makes around 250rwkw on 1bar, is your kw figure at all four wheels or at the rears?

Mines previously gone 12.1 at 115mph, however on the weekend the car struggled to do a low 12 and the mph was way off what it should be (even with the street tyres back on it) so I am putting it back on the dyno later in the week to try and see if there is a problem somewhere.

What mods do you have planned for it next?

Hey Pete

Mine makes around 250rwkw on 1bar, is your kw figure at all four wheels or at the rears?

Mines previously gone 12.1 at 115mph, however on the weekend the car struggled to do a low 12 and the mph was way off what it should be (even with the street tyres back on it) so I am putting it back on the dyno later in the week to try and see if there is a problem somewhere.

What mods do you have planned for it next?

Mine has 234kw at all four wheels. Or 276rwkw on a different dyno.

Current mods: 2x Garrett 2860, N1 oil & water pumps, forged pistons & rods, Nismo 600cc, PFC, etc.

Next mods: Apexi boost module for PFC (boost 28-30psi), Z32's, tomei poncams, semi slicks.

Im building the car for circuit, but it would be great to get into the 10's on the strip one day!

Hey Pete

Mine makes around 250rwkw on 1bar, is your kw figure at all four wheels or at the rears?

Mines previously gone 12.1 at 115mph, however on the weekend the car struggled to do a low 12 and the mph was way off what it should be (even with the street tyres back on it) so I am putting it back on the dyno later in the week to try and see if there is a problem somewhere.

What mods do you have planned for it next?

Ben what tyres did u get? I need to buy rims & tyres. Im trying to decide between GTR33 17x9 rims or cheaper GTR32 16x8 rims..

Standard brakes. Wont upgrade brakes for another 1-2 yrs..

Any advice on rim/tyre size?

Cheers

Pete

Thanks Justin, I wouldn't have improved my time without your tips/advice on the day! Was good fun. Shame about Harry's car, time to upgrade those cooling mods! Tuff gate too :thumbsup: Hope to see him on the track again soon. Pete's R32 was very nice, looks hot.. and quick as well! Looking forward to seeing your GTR finished :)
Hey Buddy, did you work out what that vibration was from front right?
Ben what tyres did u get? I need to buy rims & tyres. Im trying to decide between GTR33 17x9 rims or cheaper GTR32 16x8 rims..

Standard brakes. Wont upgrade brakes for another 1-2 yrs..

Any advice on rim/tyre size?

Cheers

Pete

I sent you a PM so it doesn't get too off topic here

I noticed at the monthly meeting there were some pics shown from the drag day, to whoever took them is it possible to get some of the ones of my car emailed to me? Or are they hosted somewhere?

PM if necessary, thanks.

Thanks for that Bec, I appreciate it if it's not too much trouble to send the pics of my cars through.

My address is contact @ mazdarotary.net

Thanks heaps

140mph?! jeesus

The timeboards read a little bit 'happy' sometimes, that run was an example of that, as I was in the other lane and the cars were pretty even across the line (I did something like 110mph).

I had to double check it as well when I read the timeslip haha

Ben - Evan (Startrippa) took all the pics at the drag day.

Ive got a CD with high res versions on it - will try to remember to bring to work 2moz and email you.

will they be posted anywhere on the forums?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh damn, I have not switched around any wiring on the harness at all yet. I had my ecu sent off to a tuner to tune for my setup and disable the turbo pressure sensor so there's no more fuel cut. Should I switch the pin around for the ring gear crankshaft position sensor? What types of symptoms would show if something is about to go wrong related to that? thank you
    • pretty much just finished my rb20neo + t and manual swap...let me tell you, it is a pain in the ass the first time. took me almost a year at this point trying to chase down minor issues. But, I think if I was to do it again, I could probably do it with almost 0 problems with how much troubleshooting experience ive gained lmao. So either +T and upgrade the transmission, or just LS swap it and throw in a CD09 lmao. there ya go
    • Hey VQ Member,   The FB Infiniti group wants to arrange a meet Sydney meet up, are there any members in the Sydney area who like to meet up. Let me know what you think ppl.  
    • Hey VQ Member,   The FB Infiniti group wants to arrange a meet Sydney meet up, are there any members in the Sydney area who like to meet up. Let me know what you think ppl.  
    • The small boxes will wear out the input shaft bearings.....if and only if you seriously exceed the torque input that they were designed to handle. It is very common for them to give up after a few years behind bosted RB20s and if you put a 25 turbo in front of them they can't last forever. Behind an NA RB20? Should last forever and ever and ever and ever. If it has died, it is from some sort of mistreatment, or perhaps extremely bad luck.
×
×
  • Create New...