Jump to content
SAU Community

Recommended Posts

guys,

Just want to know how u can check the timing on rb's? and how do u adjust it? also what should the timing be set at with following mods on my RB20DET:

*std ecu with hks fuel cut defender

*full 3 inch exhaust

*front mount

*highflow r33 turbo

*fuel pressure reg

*14psi boost

bit unsure atm....i have never done the timing on my car before, thought it might be worth a look.

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/188261-rb20det-engine-timing/
Share on other sites

use a timing gun and take the coil pack cover off, put the pick up sensor on the number one coil pack wire, then with engine idling aim the gun at the harmonic balancer, Base timing for an RB20det should be 15 degrees, this is changed by moving the crank angle sensor.

I recommend changing the timing on the dyno only if you have mods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Surely the merged entity will be called "Honda" given the relative company values. I've got to be honest, I don't understand how merging 2 companies that missed EVs (despite Nissan making the first mass produced one) will solve their problems
    • If you haven't bought the ECU yet, I would strongly consider buying a modern ECU. Yes it is very easy to setup and tune, however it is lacking many of the features of a modern ECU. The pro plug in is something like 10 or 12 years old now? Can't remember exactly but it is very dated now. In that time the Elite was released and now we have the Nexus platform.  I would strongly consider not buying the ECU that is 3 generations old now (especially as it isn't a cheap ECU!). 
    • Im happy for it as long as it means reanult gets the boot 
    • Sorry I should have been more clear with the previous post.  The block is a sanding block - picture something like this https://motorguard.com/product/motor-guard-bgr161-bgr16-1-rigid-psa-sanding-block-2-5-8-x-16/ The guide coat is the paint It's two separate things I was talking about, there is no "block guide coat". 
    • Maybe more accurately, you aren't just dulling the existing paint, you are giving the new paint something to 'grab on to'. By sanding the existing paint, you're creating a bunch of pores for the new paint to hook on to.  You can lay new paint over existing paint without sanding it, might last a year or two then sad times. The paint will peal/flake off in huge chunks. By sanding it, the new paint is able to hang onto it and won't flake off.  Depends on the primer you are using. When you buy your paint, as the paint supplier what grit of sand paper to use before you lay down the primer.  Use whatever you like as a guide coat. Pick a colour that really stands out in contrast to the paint. So say your sanding/painting a currently white car, using a black guide coat would work well. You very lightly lay the black guide coat down, then as you sand the car with the large block, all the high spots and low spots will stand out as the black paint is sanded off (or isn't sanded off).  When you buy your paint, hit up your supplier for recommendations for what paint to use for a guide coat if you're unsure what would work well with your setup. 
×
×
  • Create New...