Jump to content
SAU Community

Recommended Posts

OK ENUFF PPL SO THIS FRIDAY AT 7:30 MEET AT UNKNOWN (PM ME FOR LOCATION

NEVER ORGANISED A CRUZ B4 SO IT WILL BE MY FIRST ONE (CUT ME SUM SLACK lol)

I WONT HAVE SHEETS BUT EACH LOCATION WILL BE MADE UP AS WE GO

NO STUPID BEHAVIOUR COZ MOST OF OUR CARS ARE DEFECTABLE AND WE DONT WANT BACON FOR DINNER :)

I WILL BE IN THE WHITE 32 WITH GTR FRONT N I WILL BE THERE A BIT EARLIER

SO PLEASE COME OUT, HAVE SUM FUN, SHOULD BE AN AWESOME NITE

Edited by SLY-dN
  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

sweeeeeeeeeeeeeeeeeeeet im in so need of a cruise where and i finish work at 5:30pm friday and dont normaly get out of there untill 6pm so we could all meet at my work or somewhere else close

i was thinkin of meetin at bunnings Mile End across from etsa park at like bout 8pm but depends on amount of ppl that are interested,

prob do hills n suburbs

i would but ive got gazzanats this weekend, so gotta keep the girl all clean and all and give her 3-4 coats of wax too..................man my elbows are gonna kill me after that LOL

if more people will go me and my friend in her skyline will rock up..

i may need a lift if your willing from memory your up my way, thats if my car isn't back on the road by friday

:sorcerer: i recon we should just have one anyway no matter how many ppl rock up cause you always pick up ppl along the way :)

so true about picking up lines on the way

you can see the 'great adelaide' skyline from Mt Lofty :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good news!!! Changed the O ring today and I’ve got the “pssshhhh” back when I open the fuel cap 😂🙌🏼🙌🏼 It was 100% the O ring because that bloody thing was inside the fuel tank 😂😂😂😂😂 Fitting new fuel pump was a pain as always since the DW is a bit longer than stock. But she’s running!!! ❤️
    • PWM quite literally just chops the ful 12V voltage on and off at whatever duty cycle you're running it at. If you're running it 100%, then it is on full voltage all the time, same as if there was no PWM. If you run it at 50% duty cycle, it is only seeing the full 12V half of the time. This is broadly equivalent to running it at 6V. But the crucial difference is that motors (and a lot of other loads) don't like being powered at low volts. They will either fail to start rotating, or draw a shit ton of current, or other undesirable things. But if you give them the full volt, and then a short period of no volts, and then some more full volts, then the times when they are seeing power they are seeing all the voltage, and they are happy. But you get the performance out of them as if they were only seeing that fraction of the full voltage. It is not really easy to answer your question about what flow you will get out of it at 50% duty cycle. I can tell you that it is not as simple as you think. For a start, that 460 L/h pump is not going to flow 460 when you're on boost. When you're on boost you will be somewhere down the sloping part of that red line. If you have 15 psi of boost, then the pump can only deliver about 95 gal/h, which is <380L/h. So your simple 50% on 460 = 230 wasn't going to work anyway. But also, it won't deliver 50% of 380 either, because when you devolt or PWM trim th epower being fed to the pump, it is not able to deliver flow or pressure in the same way. 50% duty cycle will probably produce <50% of the full voltage flow. The way to find out what duty cycle you need to run it at at low load (ie, at idle) is to idle it and turn the DC down until you start to lose fuel pressure, then turn it back up above that with some extra for safety. And then you do the same thing at full load, in case it doesn't need anywhere near 100% DC. And if you're careful/caution/prudent, you will also do it at a couple of loads in between so you can shape the DC map against load. It might not be linear between the two end points.
    • Man that dinner was such a long time ago....2010! I would only replace the rubber coolant lines with silicone these days; cheap, readily available and will last for ever. You will need new hose clamps though eg https://justjap.com/products/cooling-pro-silicone-engine-heater-hose-set-black-nissan-r32-gtr-rb26dett
    • I wouldn't look too hard at what they did with the R32 GTR in endurance racing in Australia... Lots of things weren't actually available from the factory in the way those cars ran them... Japan also followed what Fred Gibson was doing here with some of there endurance cars in Japan... Australia is also the reason for things like the Brembo brakes, and the change in the gearbox... And quite a few other tricks they used to pull. There's a few other SAU peeps still on these forums that will have heard the stories direct from Alan Heaphy, Fred Gibson, and Jim Richards when we were lucky enough to have a great dinner with them
    • For all the talk of "these parts are junk" I generally recommend OEM because it's really not as bad as claimed. I have never seen or heard of a case like the N63 where the oil returns completely clog with coked oil for example in ~10 years or less. Would it be nice if it were a straighter path? I guess, but most modern cars use a scavenge pump instead of a pure gravity return. Also the factory lines that would be relatively simple to convert to braided are generally speaking hardlines from the factory. I would consider braided line to be a regression, not an improvement. It's also been engineered such that all the hardlines have appropriate strain relief where needed. There's absolutely room for improvement, for example the HKS advantage heritage intake piping shows just how much can be done to make the turbos fight each other less in OEM twin turbo configuration and reduce compressor surge but it's rarely a simple/straightforward process. I recommend looking at what the group A/N1 cars did, generally speaking the changes they made were necessary and proven in endurance racing.
×
×
  • Create New...