Jump to content
SAU Community

Recommended Posts

DW man people will PM you its late some have gone to bed some @ work and some like me if bringing my car may get the details of someone else :yes:

but may possibly still get a lift as being passenger has its good points too means i can take the TZ3 out for a run :) ... btw thats my camera

  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i need the hub which is attatched to the far left but i now belive i undo all the bolts on the far right that is closest to the diff center that drops to the ground and i smash that with a sledge to get it off the hubs

<br /><a href="http://maddox.xmission.com/hatemail.cgi?p=1#CAPSLOCK" target="_blank"><img src="http://maddox.xmission.com/keyboard4.jpg" border="0" class="linked-image" /></a><br /><br />
<br /><br /><br />

lol thats gold man

got the PM cheers for that :w00t:

and If anyone is looking for a goodtime out next weekend Im playing @ the Producers Bar (check my sig) and will have plenty of flyers with me if anyone wants some. >>>>insert shameless advertising pun here<<<

I will be the one in the DR30

a mate of mine has a TT SS ute (might have seen it at G1 out at lala land) that made 437rwkw on 8psi (injectors at full duty, and a rly safe tune). he has had the fuel system sorted, and now it makes some bullsh*t power figures (not sure what atm), can now wind up the boost up tho

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...