Jump to content
SAU Community

Recommended Posts

*******NEW QUESTION, SEE POST 8**********

THANKS FOR ALL THE HELP/ADVICE, I ONLY WANNA SPEND THE MONEY ONCE.

ok ive just ordered a r33 series 2 half cut, motor box computer etc all there.

Its going into my vl, what is the easiest and cheapest way to get to 250rwkw safely and able to run it all day??? car already has fmic 600x300x76 and will have full 3 inch turbo back exhaust. i guess what i want to know is just with these mods and an upgraded turbo could i retune the stock ecu to achieve the 250rwkw. staying with standard injectors? the vl already has big fuel pumps.

thanks in advance

Edited by scott_to4

ok so ell me then would this be achievable? or would i need bigger AFM or would aftermarket ecu negate this?

100% stock internal rb25det.

600x300x76 FMIC

3 inch mandrel bent turbo back exhaust

bigger injectors and pumps (budget $500 as i alreadhy have pumps)

aftermarket ecu (budget $2000)

appropriate BB turbo (budget $2000-$2500)

high mount exh manifold and possible external gate (budget $1000-$1500)

Ok so with the above setup could i reach 275rwkw through a standard gts-t r33 manual box? prob need new clutch.

so with around a budget of say $6000 is that possible?

thanks in advance

So now your not doing it on the cheap?

I suggest you should search around as this thread is heading down the path of all the others (being locked, because its been answered sooo many times)

In particular read this thread:

http://www.skylinesaustralia.com/forums/t55845.html

Is has all the results, parts used and so on. So basically you'll find out what fits your requirements quite easily.

turbo - 30/40 .82 or 3540 .82

china exhaust manifold - 300 or - extreme turbo manifolds - 1grand

ecu microtec

injectors - nismos or sards

wastegate 5 - 700

theres ur 350 kw

10psi :thumbsup: Ive found cars "feel" better when running a lot of boost.

Not sure if its actually faster which is probably anorther thread all together.

Running 1bar now, my car feels good/progressive @ 250rwkw, but getting in a mates EVO with 250rwkw 20+psi... its just savage like my car was with 350rwkw/24psi etc.

Would be interesting as you could go a smaller 450hp turbo and screw tins of boost into it to get the power, just depends if it will nose over in the top end though which is possible.

The 500hp GT30 will crank 275rwkw easily (around 17psi is what i did it on), but the difference from 17psi to 24psi was really interesting

the words 'cheap' ,'reliable' & 'fast'. You can only choose 2 of the 3.

Alot of truth right here. please take note.

ps. You dont need a highmount to get to that power goal, so save yourself the $$ on the highmount with external gate, because you can easily acheive your goal with a lowmount retaining the stock manifold, and spend the money elsewhere. ie. fueling.

600x300x76 FMIC = $365 justjap

3 inch mandrel bent turbo back exhaust $1k

bigger injectors and pumps = dont bother, ive seen stock injectors run this power

aftermarket ecu (budget $2000)

high flow R34 turbo, or a VG30 rear housing on your existing turbo 1.5k ~ or spend a tad more and get a HKS GT-RS bolt on nengun 2.2k

forget the highmount, save $$ on water/oil lines and changing dumps

then you have to add labour....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
    • I have a wheel cleaner pokie thing which is a glorified microfibre rag on a stick, and there is not sufficient clearance between the caliper and the barrel to clean that section. I just roll the car forward 500mm and have another shot at each wheel.
    • The "rag on a stick" is a easy way to fit in between the wheel spokes into all of the barrel Albeit I do have 10 spokes on the MX5 which limits the access to actually jam my hand in to clean the barrel, but it was also makes much easier to clean the 5 spokes on the Dunnydoore with it as well, as you don't have to worry theΒ  caliper getting in the way if you have at least about 15mm space between the caliper and barrel This of course depends if you actually have the clearance between the barrel and caliper, and the amount of OCD you have to get the barrels as clean and shiny as the face of the wheel The thing is bendy as well so you can actually shape it to conform to the inner lip of the barrel Β 
    • FWIW, as well as a basic immobiliser/remote unlock (all basic units give you those 2 things), I would also install a 4g tracker in any car I cared about. Just hide it anywhere that won't be found in a rushed look and preferably get something with a built in battery backup so it stays online for a while when the battery is removed or flat While its not a car, when our car trailer was stolen in that den of crime Sydney about a decade ago, the cops were watching from the bloke's neighbour's lawn within about 2 hours until he started swapping the plates and putting up the gumtree ad.Β Β  Obviously it is still not undefeatable (eg parking it up for a few days somewhere without sky sight) but it greatly improves your chances of getting it back quickly and with less damage
    • Instead of magic keyphrases I wonder if something can be done with auto complete. Similar to how user names are handled already. When you type '@' and follow with letters, it'll search across all usernames. It might work to have the same for forum topics. Some key to trigger it and then text search across all thread names and it'll insert the name and URL when pressing enter.
Γ—
Γ—
  • Create New...