Jump to content
SAU Community

Recommended Posts

I bought these brackets from Nissan for my R33 and a friend but I used the R34 part number by mistake so now I need to go back and re-order. I need to sell these off now as I can't use them. I stuffed up - R33 and R34 look basically the same but the R34 ones are taller and therefore wont fit an R33.

Doh!

Overall fitting these to your car takes about 2 minutes and only requires a 10mm spanner/socket to do. The engine bay will look great with these parts fresh and new.

I have two full sets of radiator and AC condensor brackets including new rubbers for all.

Full set includes:

2x Radiator top brackets

2x Radiator top rubbers

2x AC condensor top brackets

Click the photos for hires versions:

brackets4.jpg

Click the photos for hires versions:

brackets8.jpg

Pic Fitted:

ztune-brackets2.jpg

Price is:

Full set of genuine brackets and rubbers for R34 GTR: $60 INCLUDING POSTAGE!!!

Contact: PM on forums or email [email protected]

Thanks

I have the carbon radiator brackets. cost me well over $100 direct from japan. $60 is a steal!

I have the carbon radiator brackets. cost me well over $100 direct from japan. $60 is a steal!

Yep.. The auction price is 6000 yen + postage + bank fee + comission + EMS... expensive little things. Ah well I have no use for them now.

The carbon fibre bracket looks great and high quality.. .... but too bad it doesn't fit my 34 GTT so have to return it.. :(

GTR owner !!! This is a bargain!!!! :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
    • Just putting it out there, that's a decent list. You would be better off *not* doing *any* of that and buying someone else's modded car. Like mine. Or anybody else's. Yes it's lotto dependent and all this and that but that 70K (remember, double your guesses) could go elsewhere. Keep it stock, save your money, go lowball @Dose Pipe Sutututu :p
    • Does not mean what you think it means. The continual rising coefficient is the coefficient of friction that continues to rise with increasing temperature. Not "rising during a single stop", except inasmuch as the brakes should get hotter during a single stop. The RR would not be the best choice for a streeter. Yeah....no it's not. JAX would rummage around in the "shit pads we use for all shitboxen that come in here" and install those.
    • @Kinkstaah I've got my list.. but most of them is to do if I ever win the lotto
×
×
  • Create New...