The Sa Wasteland

[ted180]

yeah i'm gonna be having a bbq, i don't care about the weather

it'll most likely be hot anywayz

i might have moved by my birthday, or at least will be trying to find a place, so i dont really know what ill be doing.

im bored also, watching MPU.

[*flick*]

must be everyones night to be bored. Im tempted to go for a drive just to kill some time, but with petrol at like $150+ a litre.. im not gonna waste any petrol driving randomly..

[MissR34]

yeah i know....petrol bites at the moment

[Matty 31]

im about to jump in the ute to go for a bit of a drive

flick - if ya out i can give ya the tenner i owe luke for that go-karting deposit

[KISIN]

hey guys, can any1 with experience tell me how much would it cost to rebuild an rb30e ?

[cruzin33]

What kind of power can set of GTR rods handle?

[cruzin33]

hey guys, can any1 with experience tell me how much would it cost to rebuild an rb30e ?

It would be cheaper to go with a rb20det

[KISIN]

It would be cheaper to go with a rb20det

but can a rb20 pull same power as rb26/30 ?

So yeh...how much for rb30e rebuild ???

Edited November 30, 2007 by KISIN

[writeoff]

What kind of power can set of GTR rods handle?

Hopefully at least 350awkW. I say this because I have left standard R32 GTR conrods in my engine rebuild on advise from Peter Hall (formally from Willall Racing). However, I did purchase Tomei conrod bolts & CP forged pistons and the conrods were all tested prior to putting the engine back together.

[Cubes]

but can a rb20 pull same power as rb26/30 ?

So yeh...how much for rb30e rebuild ???

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit.

[bezender]

check this for a LOL

http://www.prostreetromania.ro/prostreet.htm

nfi if its a repost...

[Deluxe]

check this for a LOL

http://www.prostreetromania.ro/prostreet.htm

nfi if its a repost...

Yeh that is quite a funny website......... BUT DAYUM I want in on some of that Romanian beauty!!

[cruzin33]

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit.

Thats why im keeping my rb30e bottom end stock cant wait till my rb25/30 is all done might put it in a sleeper vl with hub caps and a I LOVE JESUS sticker

[KISIN]

Thats why im keeping my rb30e bottom end stock cant wait till my rb25/30 is all done might put it in a sleeper vl with hub caps and a I LOVE JESUS sticker

So u just going to leave the block as it it (and im assuming it came out of a 250k+km car...)...????

[bezender]

Yeh that is quite a funny website......... BUT DAYUM I want in on some of that Romanian beauty!!

lol that is my wall paper on my 2nd monitor

[KISIN]

Of coarse it can, but it will be super laggy.

Rb30e rebuild; 7-7.3k rev limit ~2.5k.

rb30e 8.5k revlimit ~5k.

Darren has pushed his stock rb30rods to 470rwkw with a 7k rev limit.

A workshop offered me a rebuilt rb30 bottom end (standard rebuild) for 1k...and its an expensive workshop... Am i missing something ?

[Cubes]

1k is dirt cheap; I'd be looking closely at exactly what they are doing.

A good balance is a must as well as replacement good rod bolts, good bearings and clearances that have been opened up slightly.

[Madaz]

check this for a LOL

http://www.prostreetromania.ro/prostreet.htm

nfi if its a repost...

that was so funny

Yeh that is quite a funny website......... BUT DAYUM I want in on some of that Romanian beauty!!

just for Darren Romanian Beauties

[cruzin33]

What fmic hose clamps are ppl using i need to buy some 3- 3/12inch clamps

[Madaz]

Page Not Responding

>>TRY THIS<<