Jump to content
SAU Community

Recommended Posts

Nick: It's been registered now for 2 weeks today. Overall, LOVE the car! :D I still haven't had a chance to give it a good run (only driven to work and back) BUT I love the 5sp auto - so much nicer to drive to work than the R33 LOL. This morning I had a cop driving next to me for about 10 minutes, he was looking at the car with a very confused look on his face, pretty sure he was trying to work out what it was hehe.

Here's some happy snaps I took in the car park at work:

CarPark1.jpg

CarPark2.jpg

CarPark3.jpg

:D

starting to see quite a few of these around now

looks like yours is missing the part in the middle of the front bar as well.

my mate loves his - been driving it up and down the street with trade plates (doesn't want to go too far in an uninsured car)

Yeh, the front middle is the Tow Hook Cover. Seems that even if they leave japan with them, they often go missing in shipping (as it only clips in). Aparently can get them new in Oz for around $70 IF the mitsubishi parts dealer wants to order it for you from Japan or NZ. Just got to get around to ordering one.

Honestly, don't know for certain yet.. first week was only putting in $20 & $30 here an there. Filled up the tank last Friday, and will see how I go on Monday when I re-fill... hoping it will come out about 12.0-12.5L/100. At the moment its just over 1/2 tank (~25L) for just over 200kms but you can never tell on the gauge, need to fill it up :D

That's in peak hour driving, 27km each way. This is what I used to get in the skyline while behaving myself so expecting the same.

Top right hand corner where it says "options" go in there and make sure "display mode" is set to "Standard"
i run the 9puk extreme HD ceramic 850kg pressure plate

have you tried pressing CTRL-F5

wow doesnt time fly when your having fun :bunny:

thanks for the suggestions.

The ctrl f5 worked, thanks steve ! was getting frustrating just looking at blank white page with half the buttons/emoticon pics loaded and no background :down:

^Due in approximately 8 weeks :down:

BUT we will be putting bubs in a Capsule first, and that will be fixed into the SP23 while brooke is off work. When bubs is big enough for car seats, it will be 1 in the SP, and 1 in the Legnum :bunny:

^Due in approximately 8 weeks :D

BUT we will be putting bubs in a Capsule first, and that will be fixed into the SP23 while brooke is off work. When bubs is big enough for car seats, it will be 1 in the SP, and 1 in the Legnum :huh:

If you want a really nice compact baby seat thats both a capsule and normal car seat look at the Safe and Sound Compaq.

Awesome little seat that fits in the Skyline and fits like a glove in the back seat of the 2007 Mazda 3. :D

Don't bother with the oldschool capsule they are an absolute pain in the arse.

Safe-n-Sound Compaq Deluxe

Converts from rearward-facing (capsule) to forward-facing upright child seat

http://www.productreview.com.au/showitem.php?item_id=33890

http://www.babiesgalore.com.au/view_produc...6categoryid%3D5

The young lad now at 3 still fits fine; quite a tall lad for his age with a size 10 foot. :)

Really don't bother with a capsule they are old, clunky and will do your back in. :)

looks good Lee :)

well i have a newly added speed hole in my front bar :) today @ south rd and regency rd light to turn onto regency was green then went yellow on the guy in front panicked and i went up the back of him :D lucky for me there is very little damage to my car and none to his

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.   As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.    I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.   Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.       BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.  
    • Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • I feel like this is due an update
    • Yeah, I wasn't giving two f**ks for the ring running around the bore. I was looking at the vertical scratches running up and down across the hatch marks.
×
×
  • Create New...