Jump to content
SAU Community

Recommended Posts

Correct, the nismo's are a direct bolt in, as for the sards... Steve (Madaz) seems to think they bolt straight in too but I've found no evidence to suggest otherwise... perhaps PM him and see if he has any info about it

had been eyeing off nismo 740cc from a trader on here for $695 delivered, but would probly be keen on SARD or nismo or hks if they at a decent price. If you have a chance let me know what you can find.

Cheers.

Try PerfectRun.com.au i got a set of 660cc SARD's for $444 posted but being a CA that's for 4.

Their price is 9800 yen per injector so depending on the exchange rate you should be able to get them for about $660 posted, and that's for a set of 800cc top feeds. If you have side feeds though SARDS become more expansive as you need a collar set which will set you back 13800 yen

Edited by D_Stirls

92097952vk3.th.jpg

17317599uq0.th.jpg

I witnessed this today, just need to know what happens so i can know about a situation like this in future..

B is waiting to turn

A Turns

C (bus) Comes along

B sees C come and decides to reverse slightly to allow room and no scrapage

A is behind B doing a uturn on a straight lined road thing with a car present! (you know what happens here :3)

Who is at fault here?

92097952vk3.th.jpg

17317599uq0.th.jpg

I witnessed this today, just need to know what happens so i can know about a situation like this in future..

B is waiting to turn

A Turns

C (bus) Comes along

B sees C come and decides to reverse slightly to allow room and no scrapage

A is behind B doing a uturn on a straight lined road thing with a car present! (you know what happens here :3)

Who is at fault here?

Technically "A" because he/she has done a U turn over a double solid line.........

But "B" should have looked in their rear view mirror to see if there was anything there, so they are a dumbass!!

GTR are a straight drop in GTSt need collars :banana: collars for sards are about $35 from perfect run 9800yen = about $100

Correct, the nismo's are a direct bolt in, as for the sards... Steve (Madaz) seems to think they bolt straight in too but I've found no evidence to suggest otherwise... perhaps PM him and see if he has any info about it

A is at fault for coliding with the rear end of B nuff said :banana:

as a solicitor once put it to me its how your word the accident as to who sounds at fault

92097952vk3.th.jpg

17317599uq0.th.jpg

I witnessed this today, just need to know what happens so i can know about a situation like this in future..

B is waiting to turn

A Turns

C (bus) Comes along

B sees C come and decides to reverse slightly to allow room and no scrapage

A is behind B doing a uturn on a straight lined road thing with a car present! (you know what happens here :3)

Who is at fault here?

Canberra Car Styling

Unit 2, 168 Gladstone St.

Fyshwick, ACT 2609

AUSTRALIA

Phone: (02) 6280 6020

Facsimile: (02) 6280 6020

Email: [email protected]

Give them a ring and ask new price, and then you'll know :whistling:

Canberra Car Styling

Unit 2, 168 Gladstone St.

Fyshwick, ACT 2609

AUSTRALIA

Phone: (02) 6280 6020

Facsimile: (02) 6280 6020

Email: [email protected]

Give them a ring and ask new price, and then you'll know :whistling:

Cheers for that

side skirts $280

Rear skirt $190

sucks not having a car! Ive been without one for over 1 week now, since its still at the mechanics getting a shit load done to it.

Have to get a lift with my uncle to work every day... i really dont think he should drive! I fear for my life every time i get in the car lol.

Doesnt indicate.. swaps lanes (2 lanes!) without looking.. stops briefly at green lights - they might turn orange suddenly :whistling:

Scary 15 minute drive every day!

Would love to see ur car when its done dude :whistling:

My 31 is taking forever god damn it !

so is myn but over time iv picked up

jap frount lights

jap rear lights

jap garnish

16x10s with -27 offset

origin copy flares

topstage vent

and now the rear and side skirts, just have to try to make this volvo frount lip fit or il buy a ccs frount lip

I still have to do the s13 coilover conversion, so im hoping to start to pick up parts soon for that

Then il put the rb25 turbo on the 20 and should get some good kw's

Iv been talking to this guy on ebay that can do custom dials for the r31 cluster,white,pink,blue,woodgrain,carbon and a hole heap more but im keen on the white round face with nissan on the bottom of them

more fun that way, living life on the adge

anyway can't be as bad as my uncles and sh!t! they're asians

Aahah... I always love generalizations.... point in case.... people are always saying how asians are bad drivers. Then you got people who say women are bad drivers. Then you got people who say anyone in a 4WD Burnside Bus is a bad driver.

Our female chinese exchange student bought a 4WD (dunno what type, theyre all POS's) and has been in 2 accidents within the last 3 months. I seriously fear for the safety of any poor sod within a 100 metre radius.

Tho on flicks post, her uncle sounds a lot like my dad. Doesnt check blind spots, has 'issues' in staying in his own lane. Accelerates slower than a geriatric on a skateboard. My mum drives like speed racer tho. Including the going sideways bit. (Yeah, she can drift a Toyota Seca like nobody). So I'm not sure about the male vs female thing, but imho all 4wd drivers are shit >:whistling:

Let the flames begin

-D

so is myn but over time iv picked up

jap frount lights

jap rear lights

jap garnish

16x10s with -27 offset

origin copy flares

topstage vent

and now the rear and side skirts, just have to try to make this volvo frount lip fit or il buy a ccs frount lip

I still have to do the s13 coilover conversion, so im hoping to start to pick up parts soon for that

Then il put the rb25 turbo on the 20 and should get some good kw's

Iv been talking to this guy on ebay that can do custom dials for the r31 cluster,white,pink,blue,woodgrain,carbon and a hole heap more but im keen on the white round face with nissan on the bottom of them

Nice !

By end of next week im hoping to finish my 5 speed conversion and have a custom exhaust made up.

After that heaps of little things to come: finish of the pintara dash, new steering wheel/gearstick knob/bucket seat, tint etc etc just to name a few things :whistling:

Biggest concern now are the wheels...cant seem toi find any i like in the right size/color.

When all this is done, i might look at turbo-ing it or dropping in another engine, but honestly im not real tempted with the current petrol prices, as this is my daily that get driven A LOT.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...