Jump to content
SAU Community

The Sa Wasteland


Cubes
 Share

Recommended Posts

Correct, the nismo's are a direct bolt in, as for the sards... Steve (Madaz) seems to think they bolt straight in too but I've found no evidence to suggest otherwise... perhaps PM him and see if he has any info about it

Link to comment
Share on other sites

had been eyeing off nismo 740cc from a trader on here for $695 delivered, but would probly be keen on SARD or nismo or hks if they at a decent price. If you have a chance let me know what you can find.

Cheers.

Try PerfectRun.com.au i got a set of 660cc SARD's for $444 posted but being a CA that's for 4.

Their price is 9800 yen per injector so depending on the exchange rate you should be able to get them for about $660 posted, and that's for a set of 800cc top feeds. If you have side feeds though SARDS become more expansive as you need a collar set which will set you back 13800 yen

Edited by D_Stirls
Link to comment
Share on other sites

Hey DSTROY happy Birthday. Only champions have their birthday today, If you get what i mean. If not have a look in my profile.

LOL, Happy birthday to you to champ :)

Link to comment
Share on other sites

92097952vk3.th.jpg

17317599uq0.th.jpg

I witnessed this today, just need to know what happens so i can know about a situation like this in future..

B is waiting to turn

A Turns

C (bus) Comes along

B sees C come and decides to reverse slightly to allow room and no scrapage

A is behind B doing a uturn on a straight lined road thing with a car present! (you know what happens here :3)

Who is at fault here?

Link to comment
Share on other sites

92097952vk3.th.jpg

17317599uq0.th.jpg

I witnessed this today, just need to know what happens so i can know about a situation like this in future..

B is waiting to turn

A Turns

C (bus) Comes along

B sees C come and decides to reverse slightly to allow room and no scrapage

A is behind B doing a uturn on a straight lined road thing with a car present! (you know what happens here :3)

Who is at fault here?

Technically "A" because he/she has done a U turn over a double solid line.........

But "B" should have looked in their rear view mirror to see if there was anything there, so they are a dumbass!!

Link to comment
Share on other sites

GTR are a straight drop in GTSt need collars :banana: collars for sards are about $35 from perfect run 9800yen = about $100

Correct, the nismo's are a direct bolt in, as for the sards... Steve (Madaz) seems to think they bolt straight in too but I've found no evidence to suggest otherwise... perhaps PM him and see if he has any info about it

A is at fault for coliding with the rear end of B nuff said :banana:

as a solicitor once put it to me its how your word the accident as to who sounds at fault

92097952vk3.th.jpg

17317599uq0.th.jpg

I witnessed this today, just need to know what happens so i can know about a situation like this in future..

B is waiting to turn

A Turns

C (bus) Comes along

B sees C come and decides to reverse slightly to allow room and no scrapage

A is behind B doing a uturn on a straight lined road thing with a car present! (you know what happens here :3)

Who is at fault here?

Link to comment
Share on other sites

They'll both pay (A & B)......a good judge or ins company will decide how the proportion of blame is split.........unless B was stationary which he wasn't.

Link to comment
Share on other sites

Im picking up skirts and rear lip tomoro from a r31 member for $425 brand new so im saving a bit and dont have to pay courier fee's :whistling:

Would love to see ur car when its done dude :nyaanyaa:

My 31 is taking forever god damn it !

Link to comment
Share on other sites

sucks not having a car! Ive been without one for over 1 week now, since its still at the mechanics getting a shit load done to it.

Have to get a lift with my uncle to work every day... i really dont think he should drive! I fear for my life every time i get in the car lol.

Doesnt indicate.. swaps lanes (2 lanes!) without looking.. stops briefly at green lights - they might turn orange suddenly :whistling:

Scary 15 minute drive every day!

Link to comment
Share on other sites

Would love to see ur car when its done dude :whistling:

My 31 is taking forever god damn it !

so is myn but over time iv picked up

jap frount lights

jap rear lights

jap garnish

16x10s with -27 offset

origin copy flares

topstage vent

and now the rear and side skirts, just have to try to make this volvo frount lip fit or il buy a ccs frount lip

I still have to do the s13 coilover conversion, so im hoping to start to pick up parts soon for that

Then il put the rb25 turbo on the 20 and should get some good kw's

Iv been talking to this guy on ebay that can do custom dials for the r31 cluster,white,pink,blue,woodgrain,carbon and a hole heap more but im keen on the white round face with nissan on the bottom of them

Link to comment
Share on other sites

more fun that way, living life on the adge

anyway can't be as bad as my uncles and sh!t! they're asians

Aahah... I always love generalizations.... point in case.... people are always saying how asians are bad drivers. Then you got people who say women are bad drivers. Then you got people who say anyone in a 4WD Burnside Bus is a bad driver.

Our female chinese exchange student bought a 4WD (dunno what type, theyre all POS's) and has been in 2 accidents within the last 3 months. I seriously fear for the safety of any poor sod within a 100 metre radius.

Tho on flicks post, her uncle sounds a lot like my dad. Doesnt check blind spots, has 'issues' in staying in his own lane. Accelerates slower than a geriatric on a skateboard. My mum drives like speed racer tho. Including the going sideways bit. (Yeah, she can drift a Toyota Seca like nobody). So I'm not sure about the male vs female thing, but imho all 4wd drivers are shit >:whistling:

Let the flames begin

-D

Link to comment
Share on other sites

so is myn but over time iv picked up

jap frount lights

jap rear lights

jap garnish

16x10s with -27 offset

origin copy flares

topstage vent

and now the rear and side skirts, just have to try to make this volvo frount lip fit or il buy a ccs frount lip

I still have to do the s13 coilover conversion, so im hoping to start to pick up parts soon for that

Then il put the rb25 turbo on the 20 and should get some good kw's

Iv been talking to this guy on ebay that can do custom dials for the r31 cluster,white,pink,blue,woodgrain,carbon and a hole heap more but im keen on the white round face with nissan on the bottom of them

Nice !

By end of next week im hoping to finish my 5 speed conversion and have a custom exhaust made up.

After that heaps of little things to come: finish of the pintara dash, new steering wheel/gearstick knob/bucket seat, tint etc etc just to name a few things :whistling:

Biggest concern now are the wheels...cant seem toi find any i like in the right size/color.

When all this is done, i might look at turbo-ing it or dropping in another engine, but honestly im not real tempted with the current petrol prices, as this is my daily that get driven A LOT.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Another thought, are those actually NEO cams made for the NEO head (shim over bucket) and not the non NEO head (hydraulic lifters)?
    • This is the first time I've checked my fuel pressure and I've got no idea what the pressure was before this. So I'm not sure if this is 100% the true cause of my idling problems atm, but this high pressure is my first clue to something that is "out of spec" according to the workshop manual. Also, you can see in the video, the haltech tries to get the afr target and it does maintain it at 14.2. So I would assume the afr is fine? I have to dissagree with the cluster comment. I don't think it's a bad solder joint. There's nothing wrong with my Nismo cluster because I swapped out the cluster to my old nissan one and it does the same rpm glitchy thing. So to me, thats the signal coming from the ecu that is farked. I bet if i were to put both those clusters in a working r34 gtt, it would work as it should.    I just took this video now to show what happens to the fuel pressure when I remove the vac lines on both the FPR and damper. It remains at 50psi:   Can definitly feel theres vacuum. No aftermarket reg, just stock one. I reckon its the signal coming from the ecu. So correct me if im wrong, cas send signal to ecu to show rpm of engine (and thats what we see on the haltech software) then ecu sends out ignition and injector pulses ect ect, and then spits out a signal for the rpm gauge on the cluster? Makes me wonder if something in the injectors electrically (solenoids?) or something is causing some weird feedback to the cluster signal.  Yes! They did. And I also think they are related/connected to this idle issue.  Haha sorry about it. I just filmed it with my phone. Let me know if you want me to get something els specific on vid. Yeah it's really odd. I would like to try and diagnose the injector wiring next. Don't know if that requires an oscilloscope? 
    • Hi Bud, Yeah that's the next step, going to get these checked. they were set "bang on" when it was built and its always been present. They may well be wrong though!
    • @Toff if it's a NEO and it's making the noises you're describing, it sounds like you need to work on the valve clearances and measure/replace shims as required.
    • Thread revival, apologies! I have a similar issue, strange noise that appears shortly after starting the car, fluctuates a bit with RPM... If you bring the revs up the noise sort of follows / trails behind and then settles if that makes sense? Engine was built years ago with CAMTECH 268 Cams (9mm lift i believe) and the rest of the upgrade kit with the springs and retainers. Can you upgrade the pulley itself, if the spring is too weak (same as on the VG30 Lumps) or is it pointing towards another issue?   Cheers!
×
×
  • Create New...