Jump to content
SAU Community

Recommended Posts

I've also heard that I should go for a non-Turbo first, especially since I'm driving an auto atm. Seems like a wise move IMO.

The 15k includes stamp duty, rego and insurance for a year (so about 12 or 13k for the car itself).

R34 non-turbos go for about $13k these days.

:devil: Just got to have a look at the girlfriends car, she's been complaining the last few days about overheating problems, turns out it's a stuffed head gasket. Trying to explain to her that you need to spend money on keeping a car going is like talking to a brick wall

Whos that Rad32 bloke? Had an awesome weekend in Blanchetown.

Ryan, me and Adrian were talking alot about RB30 bottom ends. What sort of difference would it make if i slapped one on my 25?

And Norman, if you think you'll be ok in a turbo, go for it. I went from an N/A auto S13 to my car, it all comes down to self control and, "easing into it".

all depends if its an early non turbo nonvvti rb25 head which came out in the late R32's or a later Turbo vvti rb25 head guys, im currently thinking about doing this for my R31. An oil gallery in the block has to be elongated to meet up with the vvti oil gallery in the head i believe, also a hole position is necessary to drill and tap a hole in the block for the idler pulley to incorporate the larger twin cam timing belt also. There is plenty of write ups about this on SAU and im sure Cubes has alot more information about it than i do...He'd be the one id ask if i needed information.

also, may take into consideration that most rb30's even tho they may be fine, would be worth either a standard spec rebuild with new rings etc..as a minimum requirement or either go all out and get a set of forgies etc....alot of work to just have a tired old motor wacked in.

Edited by Ryanrb25

You can run with the two lower tensioner locations. Just means a different cam belt.

Block off the oil galley for the vct in the rb25 head (not the block) and then drill/tap a feed for the vct or if you are running larger cams and don't wish to utilise the vct you drill the head to provide oil to the front cam bearing. Unsure exactly stockymcstock with his twincharged gt4088r rb30det worked out how to do it. :rofl:

If you run with the r32 rb25 head then its just bolts on and off you go. Its easy to lower the engine mounts ~13mm and should cost under $100. Boostworxs know what has to be done in this instance.

Once you go the 30 there's no going back. :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...