Jump to content
SAU Community

Recommended Posts

Same here!! I finally had all my 6 injectors replaced with orginal GTR items. The current ones were cracking (don't know how and why, but apparently this is common now) They're $330 per injector from Japan! It's crazy! I could get a full set of Sard injectors with bigger cc for the same price of 3 original injectors! Problem is, I'd need a aftermarket ecu to run them :D

or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

rims2.jpg

Edited by ted180
or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

VERY nice choice of wheels there! :D

thanks!

for people wondering what they are:

Weds Kranze Cerberus 1. (rare now because the Cerberus 2's are out. the 1's are alot better, the 2's only come in chrome, which is lame!)

18x9.5 and 18x11, +10 all round.

i love them!

Edited by ted180
hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :D

Oh really? Can u put in an order for me also? Will have some tax money that will need spending if a few weeks. Was going to get one off ebay for $1,095. For $900 i can add a few other things to the list of 'things im going to buy with my tax money'.

hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :P

Only $900? I would say Yes, but my funds are zilch at the mo'. I need my new exhaust before I start on anything else - my baffles inside the cat are wobbling all the time now - they're bound to just come off anyday now and shoot out the back... although, I doubt this could happen.

Turbo-back exhausts on twin turbo's are so expensive! It's like $700 just for the dump pipe!

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

What sort of upgrade is an N1 compared to standard Pete?
More fins in the water pump (2 more from memory)

Close....other way around actually. N1 pumps have less but larger fins. They don't suffer cavitation issues at high rpm and apparently flow better at lower rpm due to the bigger impellar with less fins. :P

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

Looks pretty good Dale....gotta be happy to be within 2-3 psi :P

Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

got my car back from smooth garage today from a manual conversion!

so very happy :P

edit: also getting a few more bits and peices done friday. hope to get it all back better then ever by the weekend :P

Edited by Import S13
Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

Where are ya getting it sprayed? I still need to do some touch ups ... ;\ dunno if I'll be able to afford it before autosalon tho

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Meh, I've always used 140-200TW tyres on the R32 as a daily. A set of tyres every 8-15km is acceptable to me. 8k perhaps at the less acceptable end!
    • Replace with a used tank?
    • Lots of tyres were quoted above, plenty of people have shown up to cruises on many of them.  Winton sprints allows full slicks and semi's in my category (C1, race car up to 2L), and semi's dominate the class.  You've got to set a car up properly around slicks, semi's are much more forgiving and the setup can be more versatile for a multi-use car.  I've got some used slicks fitted to the wheels already for the Silvia so we'll see how I go when the time comes. 2 sets of wheels is almost always the answer for a weekender. 
    • Well yeah - I know the tyres quoted above are technically road legal, but nobody shows up to a hill run or a cruise on them, because they burn too quick and they GENERALLY exist as the "track only tyre" for an otherwise road/track hybrid car. I suppose they could fit the bill to drive *to* the track on them instead of changing tyres there on the day. I suppose it makes sense when it comes to slicks. Otherwise you'd just drive to the track and change tyres. And if you're gonna do that I don't know why nobody picks up a slick for those uses, even for regular road car track days/HPDE use non-competition but fun stuff. I just always find it a bit funny that people will say "but street car bro on street tyres" even if said street tyres would never really be driven on the street. May as well have a slick and just enjoy the full potential on the track. *pending suspension or grip related roll overs or god knows what which may/may not apply. Nankang CRS (v2) will be my choice too in some faraway era where my car exists and goes to a track again, by which time all the options may have been updated :p. Seem to be on par with the A052 everywhere when tested back to back except half the price, and wear slower. Goes to show how fast tyre tech has come, the newest product generally is the bestererest as it comes out.
    • MMM ok,  I see a bit of praise for RE003s, but CR-S sounding like a better option, seems Nankang wants those to replace the AR-1
×
×
  • Create New...