Jump to content
SAU Community

Recommended Posts

Same here!! I finally had all my 6 injectors replaced with orginal GTR items. The current ones were cracking (don't know how and why, but apparently this is common now) They're $330 per injector from Japan! It's crazy! I could get a full set of Sard injectors with bigger cc for the same price of 3 original injectors! Problem is, I'd need a aftermarket ecu to run them :D

or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

rims2.jpg

Edited by ted180
or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

VERY nice choice of wheels there! :D

thanks!

for people wondering what they are:

Weds Kranze Cerberus 1. (rare now because the Cerberus 2's are out. the 1's are alot better, the 2's only come in chrome, which is lame!)

18x9.5 and 18x11, +10 all round.

i love them!

Edited by ted180
hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :D

Oh really? Can u put in an order for me also? Will have some tax money that will need spending if a few weeks. Was going to get one off ebay for $1,095. For $900 i can add a few other things to the list of 'things im going to buy with my tax money'.

hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :P

Only $900? I would say Yes, but my funds are zilch at the mo'. I need my new exhaust before I start on anything else - my baffles inside the cat are wobbling all the time now - they're bound to just come off anyday now and shoot out the back... although, I doubt this could happen.

Turbo-back exhausts on twin turbo's are so expensive! It's like $700 just for the dump pipe!

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

What sort of upgrade is an N1 compared to standard Pete?
More fins in the water pump (2 more from memory)

Close....other way around actually. N1 pumps have less but larger fins. They don't suffer cavitation issues at high rpm and apparently flow better at lower rpm due to the bigger impellar with less fins. :P

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

Looks pretty good Dale....gotta be happy to be within 2-3 psi :P

Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

got my car back from smooth garage today from a manual conversion!

so very happy :P

edit: also getting a few more bits and peices done friday. hope to get it all back better then ever by the weekend :P

Edited by Import S13
Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

Where are ya getting it sprayed? I still need to do some touch ups ... ;\ dunno if I'll be able to afford it before autosalon tho

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah 98 for me, and 6.7/100 was my actual usage. On the downside the bloody thing still isn't running properly but at least they hybrid system is happy now. It starts but missfires like a bastard, and isn't throwing any code except "missfire". Thanks scoop. I did notice the AFMs are reading quite different at idle 1.33v and 1.67v so 25% variance (and have both changed and swapped them, the issue stays on the driver's side afm) so I'm looking for exhaust restriction (mouse nest?), compression issue or (hopefully not, no physical damage seen) wiring issue. Throttle might also be an issue but that is harder because you can't swap them side to side and not cheap to fire the parts cannon at.
    • I hope you're right and it somehow justifies it's existence!
    • actually, I've had one of those for a while and it gets more use than you'd think. Yes catching subframes, engines etc coming out under a car on a hoist, but also getting heavy stuff on shelving (to a certain height) without a forklift, holding the fuga's hybrid battery....like many good tools you'll find the jobs for it once you have it
    • Right, so God, it's been nearly 12 months since my last confession....  The main confession is I'm a horrible car modifier (amongst other things).  Obviously the pool was a massive distraction for the entirety of last year but really doesn't excuse me for doing nothing at all on the car for this year.  To be honest this year was a mental break to get over the extreme mental torment and pressure I put myself through putting the pool in!  It really was a slog.  The pool is still not completely finished but it might never be....  The kids love it and the wifey and I love it so mission success! I have spent a grand total of 30 minutes working on the car since when I commenced on the pool.  I just have not had a spare brain cell to be able to focus on it.  The thought of working on it just seems abhorrent to be honest.  My heart is just not into it.  Yet..... What I have done is decide that I'm a clown to not paint ALL of the underside of the car while I'm at it.  Originally I was stopping at the start of the rear subframe to then "get back to it later on once I'm ready".  Let's be honest, later on might never happen so may as well keep diving in!  I'm already balls deep so may as well go a bit deeper! So......  I've just purchased a hydraulic scissor lift table to be able to take the rear subframe out as a whole unit without having to dick around with jack stands rolling around on the ground.  Us 6' 8" blokes don't operate well at ground level! One of these- Anyway, will the investment in an expensive tool that I'll probably only ever use for one job motivate me to crack on?  Only time will tell..... Wish me luck!
    • Yeah the ACL and similar formable heat shielding materials are really nice. But most people do not have the patience or talent to do a good job like that. Almost anything is better than nothing though. Even if you didn't form it closely like that and just had a slab of it slipped in between the manifold and somewhere/thing you wanted to protect, you would gain benefit. There has to be a market opportunity for people like Artec to make formed heatshields to suit their cast manifolds. The fact that they are cast means that they are consistently the exact same dimensions and they could add bosses to the castings like you see on stockers to allow heat shields to be firmly attached yet floating away from the manifold itself.
×
×
  • Create New...