Jump to content
SAU Community

Recommended Posts

Same here!! I finally had all my 6 injectors replaced with orginal GTR items. The current ones were cracking (don't know how and why, but apparently this is common now) They're $330 per injector from Japan! It's crazy! I could get a full set of Sard injectors with bigger cc for the same price of 3 original injectors! Problem is, I'd need a aftermarket ecu to run them :D

or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

rims2.jpg

Edited by ted180
or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

VERY nice choice of wheels there! :D

thanks!

for people wondering what they are:

Weds Kranze Cerberus 1. (rare now because the Cerberus 2's are out. the 1's are alot better, the 2's only come in chrome, which is lame!)

18x9.5 and 18x11, +10 all round.

i love them!

Edited by ted180
hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :D

Oh really? Can u put in an order for me also? Will have some tax money that will need spending if a few weeks. Was going to get one off ebay for $1,095. For $900 i can add a few other things to the list of 'things im going to buy with my tax money'.

hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :P

Only $900? I would say Yes, but my funds are zilch at the mo'. I need my new exhaust before I start on anything else - my baffles inside the cat are wobbling all the time now - they're bound to just come off anyday now and shoot out the back... although, I doubt this could happen.

Turbo-back exhausts on twin turbo's are so expensive! It's like $700 just for the dump pipe!

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

What sort of upgrade is an N1 compared to standard Pete?
More fins in the water pump (2 more from memory)

Close....other way around actually. N1 pumps have less but larger fins. They don't suffer cavitation issues at high rpm and apparently flow better at lower rpm due to the bigger impellar with less fins. :P

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

Looks pretty good Dale....gotta be happy to be within 2-3 psi :P

Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

got my car back from smooth garage today from a manual conversion!

so very happy :P

edit: also getting a few more bits and peices done friday. hope to get it all back better then ever by the weekend :P

Edited by Import S13
Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

Where are ya getting it sprayed? I still need to do some touch ups ... ;\ dunno if I'll be able to afford it before autosalon tho

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • One other thing worth mentioning when I did this job I only jacked up the driver side as I was only doing work there, but from what I understand both wheels should be in the air when removing the sway bar links?
    • Yep it's an r34. Usually people remove struts without removing the front upper control arm (fuca is what i assume this is?) So not sure why mine wouldn't fit. I know on my other car I did a similar job and it wouldn't fit until I removes the ball joint nut even though I didn't remove it prior.   The upper arm doesn't seem to be in the way (the part that's bolted to the chassis. The part that's bolted onto the j arm I'll check that out though.   I was going to compress the spring and put it in with the compressor attached but not sure if it will work  Haven't seen anyone do it.
    • I have a small lip on the boot of the E90 and I've been toying with the idea of trying to mould it in to the boot to remove the gaps. I guess shaving the seams? No idea what the terminology is here.  What I'm wondering is, if it's current double sided taped down, what would I do to more permanently attach it so it makes a good base for the filler? It only has edges so no way to bolt it down unless I add some braces. I've done a lot of fibre glassing in my time so that's nice and easy but I'm not sure what my options are here.  Sorry, this is the best pic I have and I'm 4 million ks from home ATM.  
    • Based on this comment I went googling. A052's in the sizes I want are certainly not cheap, but I couldn't find anything in the V70A anywhere. How much do they run/where do they get sourced from? From what I know (nothing but internet searches and reviews etc) the R888 has pretty much fallen off from anyone's actual use, and the AO52 is the king of "road legal" rubber. Nobody is driving around on their daily for Z221, AO050, DZ03G. At that point, for purely track only tyres - Why not buy actual slicks? Why does nobody actually do that anyway?
    • This an R34? It shouldn't matter though - it should be the same as on any of the others, and by "any of the others" I mean R32, because that is the car that I have had the front end apart on about 50 times this year. Sometimes, it is much easier to get the lower shock eye onto that pin when: a) you have the upper shock nuts backed off a few turns so you can wiggle it a bit more freely. When they are tight the bottom of the strut is much harder to move that _leeeetle_ bit you might need it to to win the fight. b) you have the outer bolt(s) from the FUCA out and so you can move the lower pin around freely too. Then, all you have to do is put the upper arm back on when you've got the rest back together, and this is where jacking under the balljoint can help.
×
×
  • Create New...