Jump to content
SAU Community

Recommended Posts

Same here!! I finally had all my 6 injectors replaced with orginal GTR items. The current ones were cracking (don't know how and why, but apparently this is common now) They're $330 per injector from Japan! It's crazy! I could get a full set of Sard injectors with bigger cc for the same price of 3 original injectors! Problem is, I'd need a aftermarket ecu to run them :D

or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

rims2.jpg

Edited by ted180
or a remap? either way, it would end up costing twice as much. did you buy new ones? i thought you would be able to pick up some cheaper ones locally?

heres a pic of my rims too, all cleaned up and safely in aus with me!

VERY nice choice of wheels there! :D

thanks!

for people wondering what they are:

Weds Kranze Cerberus 1. (rare now because the Cerberus 2's are out. the 1's are alot better, the 2's only come in chrome, which is lame!)

18x9.5 and 18x11, +10 all round.

i love them!

Edited by ted180
hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :D

Oh really? Can u put in an order for me also? Will have some tax money that will need spending if a few weeks. Was going to get one off ebay for $1,095. For $900 i can add a few other things to the list of 'things im going to buy with my tax money'.

hey Cronic... Just priced up a power fc for a R32 GTR for a mate on here for $900 del. If u need one i can put a order in for u to :P

Only $900? I would say Yes, but my funds are zilch at the mo'. I need my new exhaust before I start on anything else - my baffles inside the cat are wobbling all the time now - they're bound to just come off anyday now and shoot out the back... although, I doubt this could happen.

Turbo-back exhausts on twin turbo's are so expensive! It's like $700 just for the dump pipe!

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

What sort of upgrade is an N1 compared to standard Pete?
More fins in the water pump (2 more from memory)

Close....other way around actually. N1 pumps have less but larger fins. They don't suffer cavitation issues at high rpm and apparently flow better at lower rpm due to the bigger impellar with less fins. :P

What is the standard compression for an RB25det?

Did a compression test on a mates car yesterday but i don't know what the factory specs are and i only have silvia/180sx manuals.

Results (psi); (They look very good IMO)

1- 167

2- 168

3- 170

4- 170

5- 169

6- 168

Looks pretty good Dale....gotta be happy to be within 2-3 psi :P

Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

got my car back from smooth garage today from a manual conversion!

so very happy :P

edit: also getting a few more bits and peices done friday. hope to get it all back better then ever by the weekend :P

Edited by Import S13
Well my car goes in saturday to have sideskirts fitted and front bar fitted and painted! Apparently theres another little white support infront of the reo that has to come off for aftermarket bars, so the front bar will supposedly fit! Will be done before autosalon, yay.

Where are ya getting it sprayed? I still need to do some touch ups ... ;\ dunno if I'll be able to afford it before autosalon tho

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I've run most of the semis which are available and sadly you can pretty much rank them by price.  Fast and spendy = Z221, A050, DZ03G Ok and mid range price = R888, V70A, A052 I don't really rate the AR-1 because it's not cheap enough for the performance level offered. Yes, they're much cheaper than A050 but V70A can be had just as cheap and is a much faster and more predictable tyre.
    • There's no current law that stipulates that you cannot eat dessert with a soup spoon, although, it is socially unacceptable of course, shame on you But, there are emissions laws, which is sort of on topic to the OP's questions Things like emissions are, if anything, going to get stricter in the future for road registered cars I believe, 'Merica has yearly emisions testing in some states, the UK has it's yearly MOT testing as well which includes emissions Building, and purchasing modified vehicles may become alot more problematic if you want to keep them registered, how, if, and when each state handles this is anyone's guess  More food for thought really
    • I'm on the AD09, strictly on the street. They are a very nice tyre, have done ~16k km and are near the end, might make it to 20. They are, in my opinion, very much just a street tyre. I wouldn't expect them to be equivalent to some of the others in your list on the track. Although I'd be pleasantly willing to be surprised. My memory of the AD08Rs is vague enough, due to the passage of time, that I shouldn't try to compare them, but I feel as if the AD09 is not quite as "sporty" as the AD08R was.
    • There's a difference between "selling" a product to someone (which, if you walked into a workshop or bricks and mortar store and bought and walked out with it, is just the act of buying and selling) and rolling your buggy into a workshop and having them fit non-roadworthy stuff to the car. And for the latter, let's ignore any potential legal loophole arguments that the armchair lawyer might want to make to differentiate between supplying your own parts to be fit by the workshop or getting the shop to supply and fit. The workshops that have been dealt with in the US for this are in the latter category. It would be near impossible to try to charge/attack/criminalise a shop for selling "for off road use only" parts to someone unless those things were intrinsically illegal in their own right, or had other legislation wrapped around them, such as there is for guns, pharmaceuticals, etc. Well, no. And you knew your argument was silly when you made it. And there is. it might be somewhat harder in Vic, but then that's the price you pay for electing the long list of (unts that you have to run the whole shit hole**. But otherwise, you can put an aftermarket or otherwise tunable ECU into a car and get it run through the whole shebang of emissions testing as part of an engineering cert and, so long as the tune is "locked" afterwards, then that modification is on the list that is approved on the cert. But....it is an expensive process. ** Of course, the (unts who make up a large proportion of the population that eternally try to get around the rules are also a part of the problem and the reason that you end up with draconian rules in the first place. By contrast, SA was founded and the government and civil service set up and run by very sensible types (largely German) who set up good structures that enabled a lighter touch of government on the somewhat better behaved population. it is only more recently that we have followed the rest of Australia down the criminal drainhole of penal colony behaviour and now we have to catch up with mobile phone cameras and so on.  
    • Not specifically the revamp Toyos. In the past I've used Nitto NT01s, which were essentially the same compound as R888 with a different pattern (that's what the internetz said, so just be facts). I did like the NT01, progressive fade, didn't go from grip to 0 grip in a split second. If you look at the serious street/track guys, most are either on Cup 2, A052, A050, AD09, CR-S or AR-1.  
×
×
  • Create New...