Jump to content
SAU Community

Recommended Posts

Sau on my computer isn't working any more,it gives me a sever error,but evry one elses does and its currently working on my phone. Weird!

Maybe we should start up a food delivery buisness ey adrian haha oh and I only just got ur msg then!haha 3 hours after u sent it.

Sau on my computer isn't working any more,it gives me a sever error,but evry one elses does and its currently working on my phone. Weird!

Maybe we should start up a food delivery buisness ey adrian haha oh and I only just got ur msg then!haha 3 hours after u sent it.

ROFL jack

hey Adrian how old are your coil packs, how much you chasing

EDIT

made a R33 tyre placard last night you need to print it @ about 20% also cubes says you can get orriginals @ nissan for about $7

if you cant wait you can try this

tyreplacardmn1.jpg

yeah I like your rims, but already got 17's

next tyres (like in 12months time) I'll grab a set of aussie 18's and sell my GTT's

did I let ppl know I got accepted onto Disability Pension? not full payment until February (like $880 pm full payment is a lot anyway lol) but we'll manage (off the morgage, grrr)

got the spa yesterday, 2.5 L x 2 W x .9 H, new for 3190, a cple grand under sellers wholesale cost lol, sells for 7k plus in shops

also got the kiddies this:

Image041.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah the ACL and similar formable heat shielding materials are really nice. But most people do not have the patience or talent to do a good job like that. Almost anything is better than nothing though. Even if you didn't form it closely like that and just had a slab of it slipped in between the manifold and somewhere/thing you wanted to protect, you would gain benefit. There has to be a market opportunity for people like Artec to make formed heatshields to suit their cast manifolds. The fact that they are cast means that they are consistently the exact same dimensions and they could add bosses to the castings like you see on stockers to allow heat shields to be firmly attached yet floating away from the manifold itself.
    • I've seen some stuff like this as well, not sure if it's a good idea or anything but it does have more standoff from the piping than the conventional fiberglass wrap:  
    • Jap premium will be 100 RON. You should use 98.
    • The exhaust gases are at their highest temperature as they leave the exhaust port and enter the manifold. They cool as they flow through the manifold because they transfer heat to the manifold and the manifold loses heat to the surrounding environment. Thus, inevitably, the exhaust gases are cooler as they enter the turbo compared to when they entered the exhaust manifold. So, yes, the exhaust manifold can easily get as hot as the turbine housing. Having said that, you will generally see the highest temperatures where the exhaust gases have to slow down or they are concentrated into one area - which is usually the collector on the manifold and in the turbine housing, because the gases slam into the metal at those places, increasing the convective heat transfer coefficient and transferring even more heat to the metal than they might just flowing past elsewhere. Exhaust manifold heat shields are a good idea - certainly for the stock manifold they are there from the factory. People seldom have anything like that on a tubular manifold because they are hard to achieve. Some might wrap a tube manifold with fibreglass tape - but this has a reputation of leading to cracked welds. The best case is generally to put ceramic coating onto the manifold to prevent it getting as hot (internal coating) and radiating/convecting heat into the bay (external coating). All the real heat from a turbo comes from the exhaust side. The gases entering are at ~800-900°C and the steel/iron gets nearly that hot. The compressor side is only going to heat the charge air up to <<200°C (typically not much more than 100°C). So that's nothing, by comparison. The compressor is not a significant source of engine bay heat.
    • Late to the party, specifically joined this forum as I just bought one of these and this thread has been a gold mine of info. If the OP is still around, mind if I ask what gas you been putting in yours? Mine has a Japanese sticker in the cap saying premium but it seems to get way worse mileage on premium (95) than 91. I always thought it was meant to be the other way round🤷 I do think Nissans claimed "6l/100km" is a bit fantastical 😂
×
×
  • Create New...