Jump to content
SAU Community

Recommended Posts

Thats weird about the AFM, I was under the impression they flowed well and only really need changing when going for big power as the tuning resolution is a better with a Z32 item. Mine's only running about 180@wheels anyway, and I need to get the sus/chassis sorted before I need anymore :(

Mine was maxed a little over 180rwkw as well as another mates.

Perfectly normal. You can tune them up to around 220rwkw odd but its a fairly rough tune. Essentially when the afm max's out you push in enough fuel at that load point to handle the boost being run. So what occurs is say its tuned for 15psi but the afm max's out at 12psi when it hits 12psi it runs the ignition timing and enough fuel for 15psi so not optimal.

But really you never try (thats if you were good enough to be able to do it) to hold 12psi at part throttle with the afm only just maxing out so usually it goes unnoticed. :(

The Z32 allows for a fair bit more scope. Mine went from maxing the std afm out to ~4.2-4.3v on the Z32. Then ~268rwkw was ~4.7volts and now 302rwkw is high 4.9volts on occasions flat 5volts on those cold nights. So nearing its limits again. :S

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This^^^ 100%. Endless Male Attention. "buy a cool car, attract females". No reality is the opposite. "Buy a cool car, attract males".     
    • Just wanted to share the recent dyno results on my car. 20lbs of boost on pump gas. Pulled the fuse on the AWD so it was only rear wheels on the dyno. It made 484 hp at the wheels. I asked the tuner to see if we could do something so it breaks the 500hp level, but he said that we were maxxed out on pump gas. If i wanted to make more power, id have to go to E85.      8739a97a-9408-4eeb-b769-108ff1678736.mp4
    • While there is no current law for the spoon, let's swap to a different utensil. Example, does the store get fined for selling a butter knife if it ends up being a murder weapon? Perhaps they cpuld be done for assisting if they *knew* it was going to be for such a purpose. But, if used properly, which was its primary design, it's a tool for a job that's legal. I could understand companies being prosecuted if they advertise their products for being road legal if they in fact, are not. Possibly, but not necessarily, the tuners for tuning a car to a non legal fashion(emissions), but there is always the possibility that the customer really doesn't intend to use the car, in that configuration, on the road. So long as the companies can prove they have conveyed how illegal it is to use the now illegal car, in a place where the vehicle must meet the laws, they shouldn't be punished. Not sure about other countries or states, but I've been made aware that I can't legally stop a client from taking and driving their own car in NSW, Australia, even if they owe the shop money. It must go through court to get the funds from the customer, and you need to get the police or roads covering body representatives to come and stop the owner from driving the car, even if I know how hazardous the vehicle is.
    • probably around the $1700-1800 fitted in his sizes.  The ar1 is heaps cheaper. Get on scumplace I got some A052 295/35/18 for $400 that had done maybe 20-25 hot laps of SMP. 
    • People are going faster on CRS than AR1, so there's that 😕
×
×
  • Create New...