Jump to content
SAU Community

The Sa Wasteland


Cubes
 Share

Recommended Posts

Hahahahahah so you're saying if the liberals were in power the global financial problems wouldn't of happened. This is easily the post of the year and it's only feburary. Hate to break t to you but with the current situation I'll think you'll first d whoever is in power would have some sort of deficit in the budget.

+1

Link to comment
Share on other sites

And what do the liberals do? They sit on a pile of money and do nothing. Part of kruds plan is to invest in infrastructure which will create a few hundred thousand jobs. We are not that isolated if we were we getting be getting this cold after the USA sneezed.

Link to comment
Share on other sites

stol came over last night to help put the car up, cheers Andy muchly appreciated

after spraying him with rp7, and getting a screwdriver stuck in the cat for 20mins, finally got a .8mm round hole thru the cat

just want to release enough backpressure to stop boost drop

seems to have worked mostly, probably need to do again but slightly larger say little finger width thru the centre

sounds like a fair bit of work. one thing though, hole in the cat probably makes it effectively useless. just take it to an exhaust shop and have it modified completely.

Link to comment
Share on other sites

stol came over last night to help put the car up, cheers Andy muchly appreciated

after spraying him with rp7, and getting a screwdriver stuck in the cat for 20mins, finally got a .8mm round hole thru the cat

just want to release enough backpressure to stop boost drop

seems to have worked mostly, probably need to do again but slightly larger say little finger width thru the centre

Link to comment
Share on other sites

ive been up all night. night shift = days off are stupid. might buy an intercooler just for something to do today.

also, omfg!

IMG_9118.png

stock z body (pulled rear gaurds) with 18*10 -7 front and 18*12 -13 rear... do want.

Link to comment
Share on other sites

hey i didn't mind that red Volvo on top gear last night does that mean i have homicidal tendencies towards stagea's, should i see my doctor if pain persists :):D

Volvo_V70Rdesign.jpg

naa you'll come to your senses when the heat goes......hot weather can make you delirious :)

And what do the liberals do? They sit on a pile of money and do nothing.

I'm showing my age here, but my mum would always tie a sixpence in the corner of my school hanky and told me to keep it for a rainy day.........moral of the story is, better to have it than to owe it.

Part of kruds plan is to invest in infrastructure which will create a few hundred thousand jobs.

Do you actually understand how he plans on going about this......cause he doesn't, not judging by the way he has hit my business since Johnny was shown the door.

after spraying him with rp7, and getting a screwdriver stuck in the cat for 20mins, finally got a .8mm round hole thru the cat

lol Brendan, expect a visit from the RSPCA :(:P

by the way, .8mm is only 32 thou.....the size of a needle hole?

Link to comment
Share on other sites

ive been up all night. night shift = days off are stupid. might buy an intercooler just for something to do today.

Oh goody! A non-political topic. :(:D

I'm thinking of getting another cooler too ... a stealth unit to replace my home made jobbie :)

Link to comment
Share on other sites

Oh goody! A non-political topic. :(:D

figured id change it up a little. keep my adoring public guessing. :)

I'm thinking of getting another cooler too ... a stealth unit to replace my home made jobbie :)

i just want to replace the tiny stocker. put a couple borrowed temp probes in piping both pre and post-cooler just to see how it worked. and well, it doesnt work too well. and whatever kit i buy with be copping a can of crinkle coat + satin black to the piping and a can of satin black to the core itself. mmmm, stealthy.

Edited by scandyflick
Link to comment
Share on other sites

A TV/electrical question:

I have a Samsung 32 inch flatscreen LCD in my bedroom. I bought a HD set top receiver box for it, and a cheap HD aerial from ebay. That didnt work, so yesterday i bought a dick smith HD indoor/outdoor aerial. I connect it, tune the tv, only picks up SBS through the set top box. SBS, SBS HS, etc etc. then i plugged the aerial straight into the tv itself, and tuned that, and it picks up SBS clear as day, but 7, 9 and 10 are all snowy. Would it be better to mount the aerial outside? Im so over snowy tv. Could it be the tv itself?

Link to comment
Share on other sites

Brendan just bite the bullet and get your self a AMperformance high flow cat you wont regret it

i think there about $360ish will confirm price when i can get in contact with him, and you will probably pick up a couple of psi from it being able to breath

edit price confirmed $360

Link to comment
Share on other sites

I'm showing my age here, but my mum would always tie a sixpence in the corner of my school hanky and told me to keep it for a rainy day.........moral of the story is, better to have it than to owe it.

Geez pete you are old bud lol

sixpence isnt that like centuries ago...time for using dollars and cents :(

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • to have this type of adjustment possible with a curve as I wish, what budget (engine) should be planned?  
    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
×
×
  • Create New...