Jump to content
SAU Community

Recommended Posts

thats not entrily true there is a mod you can do

GWW can bench test it i imagine most other workshops can too

ive booked the car in for dyno day @ grahm wests today.

the misfiring is not as bad anymore, drove the car to uni and back, then for another test run and seems ok. there's a split second of misfire but shouldn't be too much of a problem. Ill be getting the silicone insulator on the coils over the weekend and my afm cleaned up.

when i get my exhaust done ill look in to getting a toshi map, or an safc... don't want to spend thousands if all i'm after is not too much more power than its already making. don't want the car for straight line speed, want response and a steady power band.

http://www.skylinesaustralia.com/forums/Ca...ans-t68174.html

good read, SK offers some bang up advice.

this is the link you lot are after http://www.skylinesaustralia.com/forums/Ca...html&st=20#

So i have read up quite a bit on the use of a catch can today, and i came to the conclusion that its only good if the catch can is somehow vented, which is not legal. Another conclusion is that my setup is doing sweet f**k all, and am considering selling my catch can to plan for the future. 70 bucks, takers :P

So i have read up quite a bit on the use of a catch can today, and i came to the conclusion that its only good if the catch can is somehow vented, which is not legal. Another conclusion is that my setup is doing sweet f**k all, and am considering selling my catch can to plan for the future. 70 bucks, takers :D

We have a for sale section you know :P

:):P:D

Edited by RubyRS4
At work today thinking about next yr. Wondering if i should save up spend 10k on a engine or spend a month holidaying in Japan.

hmm hard choices.

+1 Japan, been there twice and look forward to another visit sometime in the future.

I have sacrificed my washer bottle for intercooler piping. What else will fit in that section? Having a daily requires me to use it from time to time when rain dries on the windscreen.

my mate can fabricate ya a washer bottle if ya want one there

yes please!

have to work out a time when he's free, and he can look at the space ya got. does his fabrication work outta his dad's shed at virginia (where my cars are being stored, and is the same guy who made my trailer)

have to work out a time when he's free, and he can look at the space ya got. does his fabrication work outta his dad's shed at virginia (where my cars are being stored, and is the same guy who made my trailer)

I would also like a washer bottle that fits in despite my ic piping. I assume if Damo got one made up it would fit my car too? I can supply my oem washer bottle motor if he wants to integrate it (which would be preferable).

I had to lol

After Gates Timing Belt + Tensioner Kit for RB26 before Friday.... new only... pst me if you got one

-D

is that like

[quiet voice]pst hey buddy i got a gates belt if you want it (looks around) going cheap (looks around)[/quiet voice]

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
    • Time: Saturday 18th January - 9am -10:30am Where:  Cafe By Lamanna 10 English St, Essendon Fields VIC 3041  - https://g.co/kgs/mhVKvAB Registration: So we can give the cafe a heads up on rough booking numbers please rsvp below Registration Link: https://forms.gle/wPtfj9Gp8bvCiouo8
    • Welcome Gabriel. At least your car has a glorious RB and not the shitty CA18. As MBS206 mentioned all the good bits can be added later. Two doors or four?
    • And half of them have been converted to turbos.
×
×
  • Create New...